考虑粘性泥沙运动的黄河口二维水沙输移数学模型

为研究黄河口的水沙输移规律,采用基于无结构三角网格下的有限体积法建立了平面二维水沙数学模型.模型中分别采用不同方法处理粘性和非粘性沙的输移源项,并引入经验证的粘性沙输移源项改进公式.采用已有的概化水槽冲淤试验资料对模型进行了验证,然后应用于1982年6月至1983年5月期间黄河口水沙输移的数值模拟,计算得到的潮位过程及冲淤量与实测资料符合较好,结果表明模型能够较好地模拟考虑粘性沙运动的黄河口非均匀沙不平衡输移.最后比较了不同泥沙输移源项处理方式对模拟结果的影响,计算表明在黄河口水沙输移数值模拟中需要采用非均匀沙模型并同时考虑粘性和非粘性泥沙的输移.     

Incompetence and impact of training in bimatrix games

The concept of games with incompetence has been introduced to better represent games where players may not be capable of executing strategies that they select. In particular this paper introduces incompetence into bimatrix games and investigates the properties of such games. The results obtained describe both the general dependence of “extreme Nash equilibrium payoffs” on incompetence and special behaviour arising in particular cases. The dependence of the payoffs can be complex and include non-linearities and transition points. Transition points occur when kernels change and may result in the number of “extreme Nash equilibria” changing. Understanding these changes allows the determination of the benefits of regimes that seek to decrease a player’s incompetence. While the games we consider are normally static, in our context there is a hidden dynamics resulting from the fact that players will strive to improve their equilibrium payoffs by changing their incompetence levels. This might require training, in the case of games like tennis, or it might require the purchase of new equipment costing billions of dollars, in the case of military applications.     

Material properties and growth control of undoped and Sn-doped In2O3 thin films prepared by using ion beam technologies

Undoped (IO) and Sn-doped In₂O₃ (ITO) films have been deposited on glass and polymer substrates by an advanced ion beam technologies including ion-assisted deposition (IAD), hybrid ion beam, ion beam sputter deposition (IBSD), and ion-assisted reaction (IAR). Physical and chemical properties of the oxide films and adhesion between films and substrates were improved significantly by these technologies. By using the IAD method, non-stoichiometry and microstructure of the films were controlled by changing assisted oxygen ion energy and arrival ratio of assisted oxygen ion to evaporated atoms. Relationships between structural and electrical properties in ITO films on glass substrates were intensively investigated by using the IBSD method with changing ion energy, reactive gas environment, and substrate temperature. Smooth-surface ITO films (R_rms ≤ 1 nm and R_p-v ≤ 10 nm) for organic light-emitting diodes were developed with a combination of deposition conditions with controlling microstructure of a seed layer on glass. IAR surface treatment enormously enhanced the adhesion of oxide films to polymer substrate. The different dependence of IO and ITO films' properties on the experimental parameters, such as ion energy and oxygen gas environment, will be intensively discussed.     

Impedance spectroscopy study and electrical behavior of PMN-PZT actuators joined by ceramic slurry

The solid solution of Pb(Mg,Nb)O₃-Pb(Zr,TiO) O₃ materials have high piezoelectric constant of 600 ∼650 pC/N and electromechanical coupling coefficient k _p of 0.65. Due to such high piezoelectric constant and electromechanical coupling coefficient, Pb(Mg,Nb)O₃-Pb(Zr,TiO)O₃ materials have been attracted attentions for the applications of multilayer ceramic actuators. Actuators can be produced by staking piezoelectric ceramic materials and inner electrodes, alternatively. However, it is difficult to fabricate huge ceramic actuators without any serious problems during the process conditions. Because ceramic are easily cracked during the sintering process, due to strikingly different shrinkage rate between the ceramic materials and metal electrodes. In this research, new jointing methods will be proposed for huge ceramic actuators, and then their electrical properties were investigated. Time dependent leakage current and impedance spectroscopy were employed to expect device performances.     

Advances in Vapor Pressure Modeling for Electronic Packaging

Two advanced techniques have been developed for modeling vapor pressure within the plastic IC packages during solder reflow. The first involves the extension of the "wetness" technique to delamination along multimaterial interface and during dynamic solder reflow. Despite its simplicity, this technique is capable of offering reliable and accurate prediction for packages with high flexural rigidity. For packages with low flexural rigidity, the new "decoupling" technique that integrates thermodynamics, moisture diffusion, and structural analysis into a unified procedure has been shown to be more useful. The rigorous technique has been validated on both leadframe-based as well as laminate-based packages. With high accuracy and computational efficiency, these dynamic modeling tools will be valuable for optimization of package construction, materials, and solder reflow profile against popcorn cracking for both SnPb and Pb-free solders     

Treatability of Alternative Fuel Oxygenates Using Advanced Oxidation, Air Stripping, and Carbon Adsorption

Methyl tert-butyl ether (MTBE) is a gasoline oxygenate that has become a significant threat to groundwater supplies across the United States. Due to its physiochemical properties it has proven difficult and costly to remove from contaminated sites. This study was conducted to determine whether the alternative oxygenates (AO)—diisopropyl ether (DIPE), ethyltert-butyl ether (ETBE), tert-amyl methyl ether (TAME), tert-butyl alcohol (TBA), and ethanol (EtOH)—present a more efficient and less costly option from a remediation standpoint. Air stripping, carbon adsorption, and ultraviolet/H2O2 and O3/H2O2 advanced oxidation processes were examined at pilot scale to develop design parameters from which technical and economic comparisons were made for each alternative oxygenate versus MTBE. The experimental results showed that the ether AOs—DIPE, TAME, and ETBE—were each more efficiently and more economically treated than MTBE. The alternative alcohol oxygenates—TBA and EtOH—were less efficiently and less economically treated by the processes studied. The paper details the effects of primary process parameters and properties of individual oxygenates on process efficiency.     

Ultraflat indium tin oxide films prepared by ion beam sputtering

Indium tin oxide (ITO) films with a smooth surface (root-mean-square roughness; R_rms=0.40 nm) were made using a combination of the deposition conditions in the ion beam-sputtering method. Sheet resistance was 13.8 Ω/sq for a 150-nm-thick film grown at 150 °C. Oxygen was fed into the growth chamber during film growth up to 15 nm, after which, the oxygen was turned off throughout the rest of the deposition. The surface of the films became smooth with the addition of ambient oxygen but electrical resistance increased. In films grown at 150 °C with no oxygen present, a rough surface (R_rms=2.1 nm) and low sheet resistance (14.4 Ω/sq) were observed. A flat surface (R_rms=0.5 nm) with high sheet resistance (41 Ω/sq) was obtained in the films grown with ambient oxygen throughout the film growth. Surface morphology and microstructure of the films were determined by the deposition conditions at the beginning of the growth. Therefore, fabrication of ITO films with a smooth surface and high electrical conductivity was possible by combining experimental conditions.     

坡缕石提纯和活化方法研究与应用

结合近年来有关坡缕石改性研究的进展情况，简述了坡缕石结构和组成特点；坡缕石提纯中提纯难度的预判，无机及有机分散剂和搅拌方法的选用及相关机理；坡缕石活化中不同种类酸活化和热活化的效果和机理分析。     

In‐situ Observations of Nanoscale Effects in Germanium Nanowire Growth with Ternary Eutectic Alloys

Vapour‐liquid‐solid (VLS) techniques are popular routes for the scalable synthesis of semiconductor nanowires. In this article, in‐situ electron microscopy is used to correlate the equilibrium content of ternary (Au_0.75Ag_0.25–Ge and Au_0.65Ag_0.35–Ge) metastable alloys with the kinetics, thermodynamics and diameter of Ge nanowires grown via a VLS mechanism. The shape and geometry of the heterogeneous interfaces between the liquid eutectic and solid Ge nanowires varies as a function of nanowire diameter and eutectic alloy composition. The behaviour of the faceted heterogeneous liquid–solid interface correlates with the growth kinetics of the nanowires, where the main growth facet at the solid nanowire–liquid catalyst drop contact line lengthens for faster nanowire growth kinetics. Pronounced diameter dependent growth kinetics, as inferred from liquid–solid interfacial behaviour, is apparent for the synthesised nanowires. Direct in‐situ microscopy observations facilitates the comparison between the nanowire growth behaviour from ternary (Au–Ag–Ge) and binary (Au–Ge) eutectic systems.