In vitro antimicrobial properties of silver–polysaccharide coatings on porous fiber-reinforced composites for bone implants

Biostable fiber-reinforced composite (FRC) implants prepared from bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate resin reinforced with E-glass fibers have been successfully used in cranial reconstructions in 15 patients. Recently, porous FRC structures were suggested as potential implant materials. Compared with smooth surface, porous surface allows implant incorporation via bone ingrowth, but is also a subject to bacterial attachment. Non-cytotoxic silver–polysaccharide nanocomposite coatings may provide a way to decrease the risk of bacterial contamination of porous FRC structures. This study is focused on the in vitro characterization of the effect porosity on the antimicrobial efficiency of the coatings against Staphylococcus aureus and Pseudomonas aeruginosa by a series of microbiological tests (initial adhesion, antimicrobial efficacy, and biofilm formation). Characterization included confocal laser scanning microscopy and scanning electron microscopy. The effect of porosity on the initial attachment of S. aureus was pronounced, but in the case of P. aeruginosa the effect was negligible. There were no significant effects of the coatings on the initial bacterial attachment. In the antimicrobial efficacy test, the coatings were potent against both strains regardless of the sample morphology. In the biofilm tests, there were no clear effects either of morphology or of the coating. Further coating development is foreseen to achieve a longer-term antimicrobial effect to inhibiting bacterial implant colonization.     

Analysis of driver and passenger crash injury severity using partial proportional odds models

The question of whether crash injury severity should be modeled using an ordinal response model or a non-ordered (multinomial) response model is persistent in traffic safety engineering. This paper proposes the use of the partial proportional odds (PPO) model as a statistical modeling technique that both bridges the gap between ordered and non-ordered response modeling, and avoids violating the key assumptions in the behavior of crash severity inherent in these two alternatives. The partial proportional odds model is a type of logistic regression that allows certain individual predictor variables to ignore the proportional odds assumption which normally forces predictor variables to affect each level of the response variable with the same magnitude, while other predictor variables retain this proportional odds assumption. This research looks at the effectiveness of this PPO technique in predicting vehicular crash severities on Connecticut state roads using data from 1995 to 2009. The PPO model is compared to ordinal and multinomial response models on the basis of adequacy of model fit, significance of covariates, and out-of-sample prediction accuracy. The results of this study show that the PPO model has adequate fit and performs best overall in terms of covariate significance and holdout prediction accuracy. Combined with the ability to accurately represent the theoretical process of crash injury severity prediction, this makes the PPO technique a favorable approach for crash injury severity modeling by adequately modeling and predicting the ordinal nature of the crash severity process and addressing the non-proportional contributions of some covariates.     

Estimation of the thickness and the optical parameters of several stacked thin films using optimization

The reverse engineering problem addressed in the present research consists of estimating the thicknesses and the optical constants of two thin films deposited on a transparent substrate using only transmittance data through the whole stack. No functional dispersion relation assumptions are made on the complex refractive index. Instead, minimal physical constraints are employed, as in previous works of some of the authors where only one film was considered in the retrieval algorithm. To our knowledge this is the first report on the retrieval of the optical constants and the thickness of multiple film structures using only transmittance data that does not make use of dispersion relations. The same methodology may be used if the available data correspond to normal reflectance. The software used in this work is freely available through the PUMA Project web page (http://www.ime.usp.br/~egbirgin/puma/).     

Reorganization of perylene bisimide J-aggregates: from delocalized collective to localized individual excitations

Water-induced reorganization of individual one-dimensional J-aggregates of perylene bisimide (PBI) dyes was observed by fluorescence microscopy. Fluorescence spectra and decay kinetics of individual J-aggregates immobilized on glass surfaces were measured under a dry nitrogen atmosphere and under humid conditions. The fluorescence properties of PBI J-aggregates arisen from collective excitons under dry nitrogen atmosphere were changed to those of non-interacting dye monomers when water vapor was introduced into the environment (sample chamber). Time-dependent changes of the fluorescence spectra and lifetimes upon exposure to water vapor suggest an initial coordination of water molecules at defect sites leading to the formation of H-type dimer units that act as exciton quenchers, and a subsequent slower disintegration of the hydrogen-bonded J-aggregate into monomers that lack resonance coupling. Our present studies resulted in a direct demonstration of how drastically the optical properties of molecular ensembles and characteristics of their excited states can be changed by delicate reorganization of dye molecules at nanometre scales.     

Measurement of intrinsic properties of amyloid fibrils by the peak force QNM method

We report the investigation of the mechanical properties of different types of amyloid fibrils by the peak force quantitative nanomechanical (PF-QNM) technique. We demonstrate that this technique correctly measures the Young's modulus independent of the polymorphic state and the cross-sectional structural details of the fibrils, and we show that values for amyloid fibrils assembled from heptapeptides, α-synuclein, Aβ(1-42), insulin, β-lactoglobulin, lysozyme, ovalbumin, Tau protein and bovine serum albumin all fall in the range of 2-4 GPa.     

Refractory Alkali-Free Cristobalite Glass-Ceramics: Activated Reaction Sinter-Crystallization Synthesis and Properties

A new approach for the synthesis of chemically stabilized β-cristobalite-like glass-ceramic materials is developed. It is based on an activated reaction sinter-crystallization process of compacted powder mixtures at relatively low temperatures (1400–1450°C) and short heat treatment times. To facilitate homogeneous dopant distribution and thus the formation of a high content of β_x-cristobalite-like phases, possessing a very low thermal expansion coefficient, the batch components are introduced in a chemically, mechanically, or thermally preactivated form. In this way, the high-temperature glass premelting usually employed in the “classical” synthesis of glass-ceramics is avoided. Using different, mutually complementary techniques of analysis it is revealed that optimal refractory properties are achieved with glass-ceramics containing α_x- and β_x-cristobalite solid solutions with close values of the lattice parameters. In this case, the transformation between these two cristobalite-like solid solutions proceeds instead by a first-order displacive transition, by a process exhibiting features characteristic for both a suppressed first-order phase change and a second-order λ-type phase transitions. The refractory properties of the glass-ceramic materials thus synthesized and the possibility to use various forming techniques open many fields for their application.     

A CAD/CAE-integrated injection mold design system for plastic products

Mold design is a knowledge-intensive process. This paper describes a knowledge-based oriented, parametric, modular and feature-based integrated computer-aided design/computer-aided engineering (CAD/CAE) system for mold design. Development of CAx systems for numerical simulation of plastic injection molding and mold design has opened new possibilities of product analysis during the mold design. The proposed system integrates Pro/ENGINEER system with the specially developed module for the calculation of injection molding parameters, mold design, and selection of mold elements. The system interface uses parametric and CAD/CAE feature-based database to streamline the process of design, editing, and reviewing. Also presented are general structure and part of output results from the proposed CAD/CAE-integrated injection mold design system.     

IR-change and colour changes of long-oil air drying alkyd paints as a result of UV irradiation

In this study the formation of photo-oxidative species was studied by monitoring the changes in the FT-IR spectra and colour changes. To stabilize long-oil air drying alkyd paint, separate and synergistic influence of two stabilizers were used Uvasorb^®S28 as the UV-absorber and Uvasorb^®HA29 as the stabilizer which inhibits the degradation of some groups. In the presence of UV radiation (450 h, λ > 300 nm), the alkyd paint undergoes photodegradation with gradual change of its colour. The photochemical degradation of the alkyd paint is associated with an increase in the hydroxyl content and broadening of the absorption in the carbonyl region. Analysis of the colour changes in alkyd surface during photodegradation was carried out by measuring CIEL*a*b* colour components (L*, a*, b* and ΔE*). Overall, ΔE* colour change correlates well with photodegradation of alkyd paint by relative increase of the concentration of carbonyl and hydroxyl groups determinated by FT-IR measurements.     

Characterization of silver nanoparticles migration from package materials destined for contact with foods

There was studied migration of artificial silver nanoparticles from polyethylene films destined for package of such foods as bread and poultry into model media reproducing physico-chemical properties and composition of said products. Modification of films was performed by 5- or 10-fold spraying of silver nanoparticles on the surface of package material. Model media were composed from water, alcohol and plant oil according to US FDA and Russian Federal Service for Surveillance of Consumer Rights Protection and Human Well-Being official recommendation. Nanoparticles were detected in model media by means of transmission electron and atomic force microscopy. Quantification of silver in nanoparticles migrating from films was performed by mass-spectrometry with inductively coupled plasma. The results obtained showed that silver migrated from films into test media in form of nanoparticles with mean diameter close to 10-20 nm. Migrated particles were partially aggregated to complexes with dimension about 50 nm with degree of aggregation depending on media composition. Quantification showed that amounts of silver nanoparticles migrating in foods did not exceed save level of this nanomaterial consumption even in aggravated conditions when almost all volume of product was consumed in form packaged in films modified with nanosilver.