Multiple defect core photonic crystal fiber with high birefringence induced by squeezed lattice with elliptical holes in soft glass

We present a dual mode, large core highly birefringent photonic crystal fiber with a photonic cladding composed of elliptical holes ordered in a rectangular lattice. The fiber is made of borosilicate glass and has a regular set of elliptical holes with an aspect ratio of 1.27 and a filling factor near 0.5. The group birefringence (G) and effective mode area were measured at 1550 nm for the fundamental mode and were found to equal 2 × 10^?4 and 20 μm² respectively. We discuss the influence of structural parameters including the ellipticity of the air holes and the aspect ratio of the rectangular lattice on the birefringence and on the fundamental and second modes of the fiber.     

Simulation of Temperature Distribution in Stored Wheat without Aeration

A neural-deterministic simulation model applied for calculating distributions of temperatures and moisture content in a bed of wheat stored in a steel silo without aeration is presented in the article. The model consists of differential equations of heat and moisture transfer, initial and boundary conditions, and three artificial neural networks used during simulated ambient air conditions. Experiments and computer simulations were carried out in order to determine temperature fields in wheat grain stored in a steel silo for two months. The computer simulations were carried using MATLAB and FEMLAB software. The difference between measured and simulated temperature in grain near the silo wall at a height of 2.5 m from the bottom was less than 3.0°C. On the basis of the analysis performed it was concluded that the temperature distributions obtained with the model were consistent with the measured results obtained for grain stored in a steel silo without aeration.     

The effect of the surface nanostructure and composition on the antiwear properties of zirconia–titania coatings

This study describes the preparation, surface imaging and tribological properties of titania coatings modified by zirconia nanoparticles agglomerated in the form of island-like structures on the titania surface. Titania coatings and titania coatings with embedded zirconia nanoparticles were prepared by the sol–gel spin coating process on silicon wafers. After deposition the coatings were heat-treated at 500 °C or 1000 °C. The natural tendency of nanoparticles to form agglomerates was used to build separated island-like structures unevenly distributed over the titania surface having the size of 1.0–1.2 μm. Surface characterization of coatings before and after frictional tests was performed by atomic force microscopy (AFM) and optical microscopy. Zirconia nanoparticles were imaged with the use of transmission electron microscopy (TEM). The tribological properties were evaluated with the use of microtribometer operating in ambient air at technical dry friction conditions under normal load of 80 mN. It was found that nanocomposite coatings exhibit lower coefficient of friction (CoF) and considerably lower wear compared to titania coating without nanoparticles. The lowering of CoF is about 40% for coatings heated at 500 °C and 33% for the coatings heated at 1000 °C. For nanocomposites the wear stability was enhanced by a factor of 100 as compared to pure titania coatings. We claim that enhanced tribological properties are closely related to the reduction of the real contact area, lowering of the adhesive forces in frictional contacts and increasing of the composite hardness. The changes in materials composition in frictional contact has secondary effect.     

Conditions for Accurate CFD Modeling of Spray-Drying Process

The paper presents concluding results of extensive experimental and theoretical research on confident CFD modeling of spray drying. An earlier developed experimental method to determine spray-drying kinetics in a lab scale allowed us to find a critical material moisture content and to determine generalized spray-drying curves. The generalized drying curves, identical in shape in the laboratory and pilot plant units, were used in the CFD model of spray drying process. Extensive simulations for spray drying of 10, 30, and 50% of initial solid content of maltodextrin proved high accuracy of the predictions of discrete (particle size distribution, particle moisture content, particle velocity, spray temperature) and continuous-phase parameters (gas temperature and humidity). Maximum error of the predictions of discrete-phase parameters was on the level of 20%, which is probably close to the current capacity of the CFD technique for modeling of spray-drying process. Comparison of experimental measurements and theoretical results shows that incorporation of realistic spray-drying kinetics into the CFD model and correct definition of initial drying and atomization parameters enable reliable simulations of spray-drying process.     

Impact of physiological state of starter culture on ripening and flavour development of Swiss–Dutch‐type cheese

The changes in the physiological state and metabolism of starter culture in 15kg Swiss–Dutch‐type cheese blocks during two‐stage ripening were studied. The analyses were performed on samples from three layers of cheese between the rind and the core. Cell membrane integrity, intracellular esterase activity and bacteria culturability were chosen as physiological state indicators. Cheese flavour development was determined by static headspace gas chromatography. During warm room ripening, the number of cells with intact cell membranes and displaying intracellular esterase activity increased. Lactic acid bacteria underwent resuscitation and regained their culturability. A lack of homogeneity within the cheese was noticed in relation to bacterial activity and the volatiles concentration.     

Influence of fibre orientation on acoustic emission from filament wound pipes

The effect of the winding angle of filament wound pipes internally pressurized was investigated by means of the acoustic emission technique. The acoustic emission results were correlated with the theoretical data of the state of stress at the matrix-fibre boundary. The experimental results showed that acoustic emission strongly depended on fibre orientation. Acoustic emission signals were mainly caused by two types of failure of the composite: debonding on the matrix-fibre interface and transverse cracks in the lamina. The influence of fibre rotation on the acoustic emission behaviour was also taken into account. It is stated that the significant start of acoustic emission is due to cohesive cracking at the matrix-fibre boundary when the normal stress, to the fibre overreached the critical value of 11.5 MPa for all considered fibre orientations.     

Screening of Self-Assembling of Collagen IV Fragments into Stable Structures Potentially Useful in Regenerative Medicine

The aim of the research was to check whether it is possible to use fragments of type IV collagen to obtain, as a result of self-assembling, stable spatial structures that could be used to prepare new materials useful in regenerative medicine. Collagen IV fragments were obtained by using DMT/NMM/TosO⁻ as a coupling reagent. The ability to self-organize and form stable spatial structures was tested by the CD method and microscopic techniques. Biological studies covered: resazurin assay (cytotoxicity assessment) on BJ, BJ-5TA and C2C12 cell lines; an alkaline version of the comet assay (genotoxicity), Biolegend Legendplex human inflammation panel 1 assay (SC cell lines, assessment of the inflammation activity) and MTT test to determine the cytotoxicity of the porous materials based on collagen IV fragments. It was found that out of the pool of 37 fragments (peptides 1–33 and 2.1–2.4) reconstructing the outer sphere of collagen IV, nine fragments (peptides: 2, 4, 5, 6, 14, 15, 25, 26 and 30), as a result of self-assembling, form structures mimicking the structure of the triple helix of native collagens. The stability of spatial structures formed as a result of self-organization at temperatures of 4 °C, 20 °C, and 40 °C was found. The application of the MST method allowed us to determine the K_d of binding of selected fragments of collagen IV to ITGα1β1. The stability of the spatial structures of selected peptides made it possible to obtain porous materials based on their equimolar mixture. The formation of the porous materials was found for cross-linked structures and the material stabilized only by weak interactions. All tested peptides are non-cytotoxic against all tested cell lines. Selected peptides also showed no genotoxicity and no induction of immune system responses. Research on the use of porous materials based on fragments of type IV collagen, able to form stable spatial structures as scaffolds useful in regenerative medicine, will be continued.     

The Role of Selected Wavelengths of Light in the Activity of Photosystem II in Gloeobacter violaceus

Gloeobacter violaceus is a cyanobacteria species with a lack of thylakoids, while photosynthetic antennas, i.e., phycobilisomes (PBSs), photosystem II (PSII), and I (PSI), are located in the cytoplasmic membrane. We verified the hypothesis that blue–red (BR) light supplemented with a far-red (FR), ultraviolet A (UVA), and green (G) light can affect the photosynthetic electron transport chain in PSII and explain the differences in the growth of the G. violaceus culture. The cyanobacteria were cultured under different light conditions. The largest increase in G. violaceus biomass was observed only under BR + FR and BR + G light. Moreover, the shape of the G. violaceus cells was modified by the spectrum with the addition of G light. Furthermore, it was found that both the spectral composition of light and age of the cyanobacterial culture affect the different content of phycobiliproteins in the photosynthetic antennas (PBS). Most likely, in cells grown under light conditions with the addition of FR and G light, the average antenna size increased due to the inactivation of some reaction centers in PSII. Moreover, the role of PSI and gloeorhodopsin as supplementary sources of metabolic energy in the G. violaceus growth is discussed.