Transformation of Crystal Phase of Micron-sized Rutile TiO2 and Investigation on its Sonocatalytic Activity

The partial transformation of crystal phase of micron-sized TiO₂ powder from rutile to anatase was realized utilizing microwave irradiation in hydrogen peroxide solution. Afterwards, the ultrasound of low power was used as an irradiation source to induce the transition crystal TiO₂ powder to perform the sonocatalytic activity through the degradation of azo fuchsine in aqueous solution. The results show that the sonocatalytic activity of the transition crystal TiO₂ powder is obviously higher than that of pure micron-sized rutile and anatase TiO₂ powders. The degradation ratio of azo fuchsine in the presence of the transition crystal TiO₂ powder attains nearly 80% within 80 min ultrasonic irradiation.     

高岭土在碳热还原氮化过程中的相变

系统研究了苏州高岭土碳热还原氮化合成SiAlON过程在不同温度下的相变。对试样的XRD、SEM以及EDXA分析结果表明 ,1 30 0℃之前 ,试样中没有氮化物生成 ,物相为莫来石、石英和方石英 ;1 30 0℃时 ,高岭土开始发生氮化反应 ,生成过渡型SiAlON和β SiAlON。此时 ,石英和方石英相基本消失 ;1 4 0 0℃时 ,过渡型SiAlON、β SiAlON和X SiAlON三相共存 ,β SiAlON有所增多并有少量刚玉相生成 ;从 1 4 50℃到 1 550℃ ,Z值为 3的β SiAlON成为惟一的氮化产物 ,与少量SiC和刚玉相并存。莫来石在 1 50 0℃时完全消失     

Thermal behavior and the determination of the polymer-polymer interaction parameter of polycarbonate and a thermotropic liquid crystalline polymer blends

Summary The surface modification of low-density polyethylene(PE) by liquid phase photograft polymerization with acrylic acid(AA), acrylamide(AM) and glycidyl methacrylate(GMA) was described. The grafting of AA and AM was proved and characterized by electron spectroscopy for chemical analysis(ESCA). It was found that fully hydrophilic surface can be obtained in very short irradiation time. With ESCA and attenuated total reflection infrared spectroscopy(ATR-IR), it can be confirmed that bifunctional monomer GMA was grafted onto the PE film surface. Through further reaction with GMA grafted film, heparin and protamine were immobilized onto the grafted film surface.     

β-Sialon-Al2 O3-SiC系复相材料的研制和性能

研究了在 15 0 0℃的流动氮气中 ,用Al粉、Si粉、Al2 O3粉、刚玉和SiC的颗粒及细粉直接制备 β Sialon -Al2 O3-SiC系复相材料的氮化烧结技术。XRD和SEM分析表明 ,结合相 β Sialon的显微形貌随刚玉量的增加由纤维状向棱柱状转变 ,发育良好。复相材料的高温抗折强度高于常温抗折强度。抗热震试验结果显示 :添加适量的刚玉对β Sialon -SiC复相材料和添加适量的SiC对β Sialon -刚玉 复相材料都具有良好的增韧效果 ,这是β Sialon的纤维增强及柱状晶体原位自补强增韧和复合弥散相增韧综合作用的结果。抗碱和抗高炉渣试验均显示了该复相材料优良的抗碱和抗铁渣侵蚀能力。     

Polydispersity effect on transient flow behavior of polystyrene solution

Summary The transient flow behavior of the binary blend of monodisperse polystyrene fractions is measured by a flow birefringence method. Both of the shear stress and first normal stress difference are obtained simultaneously in time by using a PMFB technique. The entanglements of the polymer chains significantly affect the rheological property of the binary blend in flow region. Especially, the entanglements of the high molecular weight fractions with themselves is proven to be the main source to the growth of first normal stress differences.     

沸石滤池的净水作用

利用沸石的过滤吸附作用与石英砂进行对比试验 ,试验表明 ,粒径为 0 .8～ 1 .2mm的天然沸石对水中浊度、有机物、苯酚及氨氮的去除效果均好于同粒径石英砂 ,且水头损失小 ,运行周期长 ,是一种经济可行的水处理滤料。     

生物膜载体吸附剂对Zn2+的吸附

本文对生物膜吸附Zn^2＋的行为进行了准一级动力学方程和Elovich模型方程的拟合，对实验测定的吸附等温线用Langmuir与Freundlich吸附模型进行拟合；考察了pH值及温度对生物膜吸附Zn^2＋的影响。结果表明，Zn^2＋在生物膜载体吸附剂上的吸附动力学过程与Elovich方程有较好的拟合度，R^2=0．99994。单一等温吸附过程与Langmuir方程具有较好的拟合度，R^2=0．99785；pH=6～8，室温25℃对Zn^2＋分有较高的去除率。     

聚合物系的挥发分脱除——起泡脱挥机理及模型

聚合物系的挥发分脱除(以下简称脱挥)是聚合物生产中的关键工艺之一。本文对国外有关聚合物系脱挥领域的文献作了综述,介绍了聚合物脱挥的基本概念,重点描述了起泡脱挥传质中气泡的成核、生长、破裂,气泡合并、凝聚的机理以及它们的表达式,并介绍了几种起泡脱挥的模型。     

Synthesis and characterization of novel sulfonated poly(arylene ether ketone)s derived from 4,4'-sulfonyldiphenol

Summary Novel sulfonated poly(arylene ether ketone)s were prepared directly by aromatic nucleophilic polycondensation of 4,4'-sulfonyldiphenol with various ratios of 4,4'-difluorobenzophenone to 5,5'-carbonylbis(2-fluorobenzenesulfonate) in dimethyl sulfoxide. The resulting polyelectrolytes were characterized by IR, NMR, TGA and DSC. The 10% weight loss temperature of the products is higher than 510°C, and their glass transition temperature is above 260°C. The introduction of 4,4'-sulfonyldiphenol with powerful electron-withdrawing group, -SO₂₋, into the main chain of sulfonated poly(arylene ether ketone)s improves the thermal stability against desulfonation. The ion-exchange capacity and swelling of the polyelectrolyte membranes were measured, which are higher than 1.23meq/g and not higher than 20.9%, respectively. The membranes show very good perspectives in polymer electrolyte fuel cell (PEMFC) application. Received: 27 March 2002 / Revised version: 7 May 2002 / Accepted: 13 May 2002     

Preparation of ketoprofen‐loaded high‐molecular‐weight poly(vinyl alcohol) gels

High‐molecular‐weight atactic poly(vinyl alcohol) (a‐PVA) gels loaded with (R,S)‐2‐(3‐benzoylphenyl)propionic acid (ketoprofen) were prepared from 5, 6, 7, and 8 g/dL solutions of a‐PVA with a number‐average degree of polymerization of 4000 in an ethylene glycol/water mixture with an aging method to identify the effect of the initial polymer concentration on the swelling behavior, morphology, and thermal properties of a‐PVA gels. Then, the release behavior of ketoprofen from a‐PVA gels was investigated. As the polymer concentration decreased, the ability for network formation decreased, and the degree of swelling of the a‐PVA gels increased. In addition, the enthalpy increased with an increase in the a‐PVA concentration, but the melting temperatures of the gels prepared at different initial polymer concentrations were the same; this indicated that tighter gel networks would be formed by a higher polymer chain density. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007