Severe facial clefting, limbic dermoid, hypoplasia of the corpus callosum, and multiple skin appendages: severe frontofacionasal "dysplasia" or newly recognised syndrome?

We report on a child with severe midline facial cleft, bilateral cleft lip and palate, telecanthus, S-shaped palpebral fissures, limbic dermoid, midface hypoplasia, hypoplastic corpus callosum, and multiple skin appendages. This case may be an example of severe frontofacionasal "dysplasia" or a newly recognised syndrome.     

Synthesis of a linearly interpolated gain scheduling controller for large flexible spacecraft ETS-VIII

This paper illustrates a design procedure for a linearly interpolated gain scheduling controller for Engineering Test Satellite VIII (ETS-VIII) using its linear parameter-varying (LPV) model. The LPV model here consists of piecewise-linear functions of the paddle rotation angle and a norm-bounded perturbation. The main purpose of this research is to derive a simple structured scheduling law that can be easily implemented in a satellite onboard computer. The derived gain has only two grid points and is scheduled simply by linear interpolation, which is desirable from the standpoint of implementability. Moreover, since the synthesis condition is based on parameter-dependent Lyapunov functions, it gives less conservative results than existing methods. Simulation results are presented to show the effectiveness of the proposed synthesis.     

Instance-based domain ontological view creation towards semantic integration

In many domains today there are very limited explicit ontologies established for implementing information systems. Traditional ontology-driven semantic integration approaches cannot be directly applied in integrating these information systems. Usually, the information systems have schemas, a type of formal information model, for their information repositories which to some extent imply the semantics of the information. Each schema actually reflects a specific view of the domain conceptualization. This paper investigates the theoretical foundation of ontologies and extends the traditional ontology concept to the ontological view concept. It proposes to use ontological views to address the challenge of semantic integration. The proposed approach adopts the schemas to create local ontological views, uses data instances of the information systems to discover semantic relationships between the concepts within the ontological views, and builds a domain ontological view based on the discovered equivalence mappings. It applies the hierarchical clustering technique on the data instances and, in the further analysis, uses the clusters to reduce the cost of processing a large amount of data. The matching of concept properties is based on the probability distribution of the data instances. The experimental results have demonstrated the effectiveness of this approach.     

Estimating life-form cover fractions in California sage scrub communities using multispectral remote sensing

The California sage scrub (CSS) community type in California's Mediterranean-type ecosystems is known for its high biodiversity and is home to a large number of rare, threatened, and endangered species. Because of extensive urban development in the past fifty years, this ecologically significant community type is highly degraded and fragmented. To conserve endangered CSS communities, monitoring internal conditions of communities is as crucial as monitoring distributions of the community type in the region. Vegetation type mapping and field sampling of individual plants provide ecologically meaningful information about CSS communities such as spatial distribution and species compositions, respectively. However, both approaches only provide spatially comprehensive information but no information about internal conditions or vice versa. Therefore, there is a need for monitoring variables which fill the information gap between vegetation type maps and field-based data. A number of field-based studies indicate that life-form fractional cover is an effective indicator of CSS community health and habitat quality for CSS-obligated species. This study investigates the effectiveness of remote sensing approaches for estimating fractional cover of true shrub, subshrub, herb, and bare ground in CSS communities of southern California. Combinations of four types of multispectral imagery ranging from 0.15 m resolution scanned color infrared aerial photography to 10 m resolution SPOT 5 multispectral imagery and three image processing models - per-pixel, object-based, and spectral mixture models - were tested.An object-based image analysis (OBIA) routine consistently yielded higher accuracy than other image processing methods for estimating all cover types. Life-form cover was reliably predicted, with error magnitudes as low as 2%. Subshrub and herb cover types required finer spatial resolution imagery for more accurate predictions than true shrub and bare ground types. Positioning of sampling grids had a substantial impact on the reliability of accuracy assessment, particularly for cover estimates predicted using multiple endmember spectral mixture analysis (MESMA) applied to SPOT imagery. Of the approaches tested in this study, OBIA using pansharpened QuickBird imagery is one of the most promising approaches because of its high accuracy and processing efficiency and should be tested for more heterogeneous CSS landscapes. MESMA applied to SPOT imagery should also be examined for effectiveness in estimating factional cover over more extensive habitat areas because of its low data cost and potential for conducting retrospective studies of vegetation community conditions.     

Development of a liquid tin microjet target for an efficient laser-produced plasma extreme ultraviolet source

A regenerative tin liquid microjet target was developed for a high average power extreme ultraviolet (EUV) source. The diameter of the target was smaller than 160 microm and good vacuum lower than 0.5 Pa was maintained during the operation. A maximum EUV conversion efficiency of 1.8% at the Nd:yttrium-aluminum-garnet laser intensity of around 2 x 10(11) Wcm(2) with a spot diameter of 175 microm (full width at half maximum) was observed. The angular distribution of the EUV emission remained almost isotropic, whereas suprathermal ions mainly emerged toward the target normal.     

Mechanical properties of textile-inserted PP/PP knitted composites using injection–compression molding

This paper concentrates on the experimental investigation of the self-reinforced all-polypropylene composites. There exists an optimum processing condition to produce high quality specimens by injection–compression molding. Tensile and 3-point bending properties of the virgin PP materials were nearly unaffected by the introduction of reinforcing knit layer(s) due to very low fibre content of the knitted fabrics used. 3-point bending properties were also unaffected by the surface of indentation-flexure. The applied impact energy was maintained at 5 J for the homo-PP and 27 J for the block-PP materials, respectively, to cause penetration during drop-weight impact tests. It is interestingly noteworthy that the self-reinforced homo-PP composites exhibited superior energy absorption capability when compared with the virgin matrix materials. The corresponding plate bending performances of the self-reinforced homo-PP composites also revealed consistent improvement as compared to their virgin counterparts. On the other hand, although virgin block-PP material exhibited better impact performances than its composite reinforced by the homo-PP knitted fabric, a notably small increase in the reinforcement fibre content revealed considerable improvement in the impact properties comparable to those of the virgin block-PP matrix materials. These self-reinforced homo-PP/block-PP materials have clearly indicated that they have the potential to out-perform the block-PP materials via modification and/or manipulation of the reinforcement knit structural/geometrical parameters and the content of reinforcement fibres. Both static and dynamic impact properties are likely to be affected by the local area properties of the tested face under indentation, and thereby contributing to the improved performances of the composite specimens with the knit face under the impact.     

A 63-mW H.264/MPEG-4 audio/visual codec LSI with module-wise dynamic Voltage/frequency scaling

A single-chip H.264 and MPEG-4 audio-visual LSI for mobile applications including terrestrial digital broadcasting system (ISDB-T / DVB-H) with a module-wise, dynamic voltage/frequency scaling architecture is presented for the first time. This LSI can keep operating even during the voltage/frequency transition, so there is no performance overhead. It is realized through a dynamic deskewing system and an on-chip voltage regulator with slew rate control. By the combination with traditional low power techniques such as embedded DRAM and clock gating, it consumes only 63 mW in decoding QVGA H.264 video at 15 frames/sec and MPEG-4 AAC LC audio simultaneously.     

A fully Bayesian approach for combining multilevel failure information in fault tree quantification and optimal follow-on resource allocation

This paper presents a fully Bayesian approach that simultaneously combines non-overlapping (in time) basic event and higher-level event failure data in fault tree quantification. Such higher-level data often correspond to train, subsystem or system failure events. The fully Bayesian approach also automatically propagates the highest-level data to lower levels in the fault tree. A simple example illustrates our approach. The optimal allocation of resources for collecting additional data from a choice of different level events is also presented. The optimization is achieved using a genetic algorithm.     

Reduction of defects and improvement in the performance of blue phosphor for thick‐dielectric electroluminescent displays using Color‐by‐Blue

Abstract— Defect‐free large‐area inorganic thick‐dielectric EL (TDEL) displays using Color by Blue (CBB) technology have been successfully developed. We have achieved the world's highest blue‐phosphor luminance of 900 cd/m² for a single‐pixel device by using CBB and by optimizing the e‐beam gun configuration and the flow rate of H₂S in the vacuum chamber. By analyzing the defects on panels with triple‐pattern phosphors and CBB panels, we also found that the number of defects on CBB panels can be drastically reduced compared with those on triple‐pattern panels. The defect‐free 17‐in. VGA CBB panels show better characteristics, a high peak luminance of 600 cd/m² and a high contrast ratio of 1000:1, compared with those of triple‐pattern panels.     

Use of cryogenic machining to improve the adhesion of sphene bioceramic coatings on titanium substrates for dental and orthopaedic applications

Rods of commercially pure titanium were machined using standard oil-based emulsion and cryogenic cooling, and were then coated with sphene (CaTiSiO₅) bioceramic by spray coating using an automatic airbrush. The sphene bioceramic was synthesized in-situ starting from a suspension of polysiloxane that used as SiO₂ precursor, CaCO₃ and TiO₂ nanoparticles. The suspension was deposited on the machined substrates, which were heat treated up to 950?°C in order to promote the formation of sphene ceramic. The produced coated prototypes were characterized to evaluate the effect of the machining conditions on surface roughness and microstructure of the substrate, and thereby their effect on coating adhesion. Nanoindentation tests were employed to determine the hardness and elastic modulus of the coating through its thickness. Results showed that the reduced amount of defects on the surface of the cryo-machined substrates, contributed to increase the hardness, elastic modulus and adhesion strength of the coating-substrate interfaces compared to standard machined samples, therefore improving adhesion of the coating to the underlying substrate.