园区多能互补供能系统设计方法研究

为提高园区多能互补工程的能源综合利用效率及整体效益，对供能系统设计中的负荷统计、逐时负荷匹配、供能系统、设备选型、容量配置及运行策略等问题进行了分析和总结，提出园区多能互补供能系统设计的基本流程与方法，可为园区多能互补供能系统的设计提供参考。     

综采工作面粉尘防治问题分析与技术改进

针对新桥煤矿2301综采工作面机载喷雾系统喷雾效果差、喷雾耗水量大造成煤质含水量超标、喷嘴雾化程度不高、喷嘴容易发生堵塞等问题,提出了高压喷雾系统设计方案,选择了1.2mm的锥形引射喷嘴和1.5mm的扇形引射喷嘴。采用固定水泵供水方式,结合工作面实际情况,计算出喷雾总用水量247.5L/min,提高了喷雾射程,提升了除尘效果。     

Transformation of the reabsorption characteristics of lignite treated by low and high temperature drying process

Abstract

The reabsorption characteristics of the lignite treated by low and high temperature drying process were addressed in the paper. The information about the moisture form, functional groups, effective water-filled porosities and equilibrium moisture content of the lignite before and after the drying process was investigated using Differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and a self-made reabsorption device, respectively. The results show that the low drying temperature (140, 190, 230?°C, 10?min, N₂) has little impact on the effective water-filled porosities of the resulted samples, whereas it has a great influence on the main oxygen-containing functional groups, which amount firstly decreases and then increases with the drying temperature increasing. In the case of the lignite samples dried under high-temperature (600, 700, 800?°C, 30?s, N₂), the amount of the effective water-filled porosity of the sample decreases and the amount of oxygen-containing functional groups increases as the temperature increasing. The reabsorption capability of the high temperature dried sample is much lower than that of the sample treated under low drying temperature. The reabsorption characteristics of the low-temperature dried samples are affected by the amount of the oxygen-containing functional groups, while the effective water-filled porosity is main factor for the lignite samples derived from high temperature drying process. Moreover, the work gives a good evidence that the high-temperature drying process is an effective choose for lignite upgrading.     

咪唑啉型缓蚀剂的合成及其缓蚀性能研究

以棕榈酸、二乙烯三胺为原料合成咪唑啉，并对其进行水溶性改性制备了咪唑啉型缓蚀剂YG-1，与助剂硫脲复配得到复配缓蚀体系YG-2。应用静态挂片失重法、电化学法评价了该复配缓蚀体系YG-2的缓蚀性能，研究了缓蚀机理，并用扫描电镜分析了腐蚀前后及加入复配缓蚀体系YG-2后A3钢的表面形貌。研究结果表明，在30℃下加入复配缓蚀体系YG-2能有效地抑制饱和CO2的高矿化度盐水对A3钢的腐蚀，其使用浓度为20mg／L时，缓蚀率达到98．5％，腐蚀速率仅为0．009mm／a，远好于我国石油天然气行业标准规定的指标。     

柯克亚油气田混合来源天然气的地球化学特征

柯克亚油气田是我国开发比较早的一个油气田,但由于受混源和其他因素的影响,对气源的认识众说纷纭。通过对天然气的地球化学特征的分析,并参照国内外关于甲烷、乙烷、丙烷碳同位素关系方面的资料,提出了如下看法:柯克亚天然气碳同位素相对较重,与塔里木盆地下古生界海相天然气的碳同位素组成区别较大;根据天然气40Ar/36Ar组成,柯克亚油气田的气源不是单一来源;柯克亚油气田绝大多数天然气的甲烷和乙烷碳同位素值关系符合Faber推断的 型有机质方程直线关系,说明有机质属于较好的有机质类型,或者是由原油裂解形成的天然气;除了K2井和K18井天然气成熟度较低以外,绝大多数天然气的成熟度大约在1.8%～2.2%之间,属于高过成熟气,但也混有一些成熟度在0.9%～1.2%的源岩形成的天然气;推测天然气主要来源于石炭系―二叠系源岩,而混有成熟度低的源岩形成的天然气则有可能来自侏罗系源岩。     

酮苯脱蜡装置用加氢裂化尾油生产优质白油料

加氢裂化尾油经酮苯脱蜡和白土精制工艺可生产高质量润滑油基础油.该基础油具有很好的低温流动性能,且对添加剂感受性好,硫、氮含量低,饱和烃含量高,可以调合中、高档润滑油,制备白油.加氢裂化尾油的综合利用具有明显的经济效益.     

固体酒精的制备工艺与性能研究

以硬脂酸与氢氧化钠反应生成的硬脂酸钠用作制备固体酒精的固化剂，研究了固体酒精的制备工艺与性能的关系，通过正交试验对工艺条件进行了优化。用40mL酒精溶解2．0g硬酯酸，50mL酒精溶解0．4g氢氧化钠，在70℃下反应30min，制备的固体酒精综合性能最好。     

Computing the Average Symbol Error Probability of the MPSK System Having Quadrature Error

When quadrature error exists, the shape of the M‐ary phase shift keying (MPSK) signal constellation becomes skewed‐elliptic. Each MPSK symbol takes on a different symbol error probability (SEP) value. The analytical results presented thus far have been derived from studies which examined the SEP problem assuming that the SEP of each MPSK symbol is equally likely; therefore, those results should not be treated as offering a complete solution. In this letter, we present a new and more complete solution to the SEP problem of MPSK by relaxing the above assumption and finding the expressions for the average as well as individual SEP in the presence of quadrature error.     

重质残油磁力传动齿轮泵磁偶合器扭矩计算

 磁力传动重质残油齿轮泵磁耦合器扭矩计算为三位磁场计算，边界条件复杂，加之漏磁、磁性材料参数误差等影响，求解较困难．导出精确求解磁耦合器扭矩的解析解，结果与实验解相符．并根据相似原理给出永磁体的长径比L/D=2/3~1，导磁材料径向厚度t=(1.5~2)L ( 为磁体厚)，可供设计时参考。