金刚石薄膜中晶粒尺寸的研究

扫描电子显微研究表明，化学汽相沉积的金刚石薄膜中晶粒大小比较均匀。但随着沉积时间和薄膜厚度的增加，晶粒逐渐变大，且每一层内，存在少量的大金刚石颗粒，讨论了晶粒尺寸变化和大晶粒形成的原因和机制。     

DF_4内燃机车柴油机润滑油的热重分析

通过对DF_4内燃机车柴油机润滑油的热重曲线TG和微商热重曲线DTG的分析,探讨了这种润滑油的衰变规律。     

玻璃钢管道的特点,设计原理及选用时的注意事项

本文旨在通过对玻璃钢管道及其标准的发展历史、产品特点、基本设计原理、质量影响因素及选用时应注意的事项等方面的介绍，使用户与工程设计人员对该产品有一个比较全面的了解，以便更好地选用并受益于这种管材。     

Apoptosis in the failing human heart

BACKGROUND: Loss of myocytes is an important mechanism in the development of cardiac failure of either ischemic or nonischemic origin. However, whether programmed cell death (apoptosis) is implicated in the terminal stages of heart failure is not known. We therefore studied the magnitude of myocyte apoptosis in patients with intractable congestive heart failure. METHODS: Myocardial samples were obtained from the hearts of 36 patients who underwent cardiac transplantation and from the hearts of 3 patients who died soon after myocardial infarction. Samples from 11 normal hearts were used as controls. Apoptosis was evaluated histochemically, biochemically, and by a combination of histochemical analysis and confocal microscopy. The expression of two proto-oncogenes that influence apoptosis, BCL2 and BAX, was also determined. RESULTS: Heart failure was characterized morphologically by a 232-fold increase in myocyte apoptosis and biochemically by DNA laddering (an indicator of apoptosis). The histochemical demonstration of DNA-strand breaks in myocyte nuclei was coupled with the documentation of chromatin condensation and fragmentation by confocal microscopy. All these findings reflect apoptosis of myocytes. The percentage of myocytes labeled with BCL2 (which protects cells against apoptosis) was 1.8 times as high in the hearts of patients with cardiac failure as in the normal hearts, whereas labeling with BAX (which promotes apoptosis) remained constant. The near doubling of the expression of BCL2 in the cardiac tissue of patients with heart failure was confirmed by Western blotting. CONCLUSIONS: Programmed death of myocytes occurs in the decompensated human heart in spite of the enhanced expression of BCL2; this phenomenon may contribute to the progression of cardiac dysfunction.     

油溶性减阻功能聚合物的研制

介绍了以混合α-烯烃为原料,制备了具有减阻功能的共聚物。讨论了催化剂浓度、聚合温度、预聚合时间、原料单体中杂质含量对共聚物特性粘度和转化率的影响。试验表明,在较低的催化剂浓度和预聚合温度下,能得到较高分子量的聚合物。气相色谱法和DSC法测定其组成和单体混合物的组成基本一致,表明共聚物是一种无规的梳状结构聚合物。该聚合物达到较高特性粘度时,能获得较好的减阻率。     

“镍”催化酰氯和有机锡试剂交叉偶联反应的研究

镍络合物催化酰氯与有机锡试剂交叉偶联合成有机酮的反应,其反应选择性强,反应彻底,转化率高,工艺简单。在有机锡过量的情况下,对不同催化剂的催化活性和包括投料比,反应温度,反应时间,反应溶剂等反应条件进行了考察。     

铌酸对酯化反应催化性能的研究

研究了新型固体酸催化剂铌酸对乙醇及异戊醇与乙酸酯化反应的催化性能、研究表明热处理温度对水洗法制备的铌酸催化剂的催化活性有显著影响,在350℃处理时活性达到极大值.与HZSM-5相比,铌酸催化剂不仅在乙醇和乙酸的气相酯化反应中表现出良好的催比性能,而且在异戊醇和乙醇的液相酯化反应中亦表现出较好的催化活性和稳定性.     

管外上升R－113流体的沸腾换热试验

详细介绍了Ｒ－１１３流体管外上升流动的沸腾换热试验，包括试验台架、流量计和温度测量的修正，以及试验数据。拟合的换热关系式为ｑ＝５２８（Ｔｗ─Ｔｓ）１．３３。     

低旋流进气直喷燃烧系统在195柴油机上的应用研究

介绍了低旋流进气直喷燃烧系统应用于１９５柴油机的试验结果，着重探讨了燃烧室结构尺寸和供油系统主要参数对柴油机性能和燃烧放热规律的影响。研究表明，这种燃烧系统应用于小缸径直喷柴油机具有良好的推广前景。