Correction to: An Updated Index Including Toughness for Hot-Cracking Susceptibility

Metallurgical and Materials Transactions A -     

An Updated Index Including Toughness for Hot-Cracking Susceptibility

Metallurgical and Materials Transactions A - Hot cracking is one of the major defects that can occur in laser-based additive manufacturing. During the terminal stage of solidification, hot cracking...     

Real-time monitoring of segmental dynamics during crystallization of poly(l(-)-lactide) by simultaneous DRS/SALS technique

A novel experimental set up consisting of dielectric spectroscopy and small angle light scattering (or potentially any other optical technique used in combination) is introduced. The sample is enclosed in a Dielectric-Optical-Shear (DOS) cell capable of precisely controlling temperature and thickness. This method allows for simultaneous in situ, real-time monitoring of the changes in the molecular dynamics and corresponding development of supramolecular structure of a given polymer system during various time-sensitive processes. The DOS cell is utilized to investigate relaxation phenomena related to the glass transition, T_g, of poly(l(−)-lactide) during isothermal crystallization under quiescent, partially constrained conditions. A decrease in T_g was observed in situ via a shift in dipolar relaxation to higher frequency (confirmed calorimetrically, ex situ). The shift was most rapid in the spherulitic impingement stage of crystallization, at approximately 30% overall crystallinity.     

A distribution kinetics model for chromatography of block-like molecules

We develop the theory for chromatographic separation of isomers such as polycyclic aromatic hydrocarbons, polychlorinated biphenyls, dioxins, steroids, and carotenoids based on shape-selective mechanisms for either exclusion or adsorption. Block-like solute transport and retention on oriented stationary phases are modeled by a dispersed-flow chromatographic equation combined with simultaneous exclusion partitioning and shaped-based adsorption. Molecules to be separated are considered distributed continuously with respect to the shape and sorption parameters. The population balance equations of distribution kinetics provide the governing differential equations that are solved for the temporal moments of the concentration in a chromatographic column. By including dispersive mass transport effects, the model allows estimation of peak variance and HETP and is thus an improvement over theories that focus solely on retention time. The model predictions are compared with experimental data from the literature for gas chromatography.     

Vitamin e analytical procedure for cottonseed and its products

Conclusions A procedure for the analysis of cottonseed and its products for Vitamin E has been developed and improved. The present procedure generally gives good checks on duplicate analyses. The Vitamin E content of whole cottonseed is somewhat more a function of variety than of locality. The 1952 crop of cottonseed contained more Vitamin E than the 1951 crop. The two crops averaged 84 g. per ton and 68.5 g. per ton, respectively. Most recent results show that there is no loss of Vitamin E in the storage of cottonseed or during the processing of the seed for its oil and other products. The hexane-soluble portion of a methanol extract of rolled or cooked cottonseed meats contains Vitamin E in concentrations that have exceeded the values reported for wheat germ oil, the present commercial source. A sample of commercial solvent extracted cottonseed meal was found to contain considerably less Vitamin E than hydraulic- or screw-pressed meals. The Vitamin E research described in this writing was conducted as a cooperative project of the Texas Engineering Experiment Station and the Cotton Research Committee of Texas.     

Surface hydrolysis of filaments based on poly(trimethylene terephthalate) spun at high spinning speeds

The surface alkaline hydrolysis of fibers made from poly(trimethylene terephthalate) (PTT) was studied after extruding the polymer at high spinning speeds from 2000 to 6000 m/min and heat setting in the range of temperatures from 100 to 180°C. Fiber weight loss increased with an increasing heat‐setting temperature but it was also dependent on the spinning speed. Some of the partially hydrolyzed fibers had a well‐developed, hydrophilic surface, and pore size in the range of 0.69 to 1.20 μm. The optimum reaction and morphological conditions for increasing porosity in PTT fibers depends on spinning speed and heat‐setting temperature. A temperature of 180°C is the upper limit for heat‐setting PTT filaments but seems to be the most effective for making porous fibers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1724–1730, 2004     

MET𝔸P: revisiting Privacy-Preserving Data Publishing using secure devices

The goal of Privacy-Preserving Data Publishing (PPDP) is to generate a sanitized (i.e. harmless) view of sensitive personal data (e.g. a health survey), to be released to some agencies or simply the public. However, traditional PPDP practices all make the assumption that the process is run on a trusted central server. In this article, we argue that the trust assumption on the central server is far too strong. We propose Met _??P, a generic fully distributed protocol, to execute various forms of PPDP algorithms on an asymmetric architecture composed of low power secure devices and a powerful but untrusted infrastructure. We show that this protocol is both correct and secure against honest-but-curious or malicious adversaries. Finally, we provide an experimental validation showing that this protocol can support PPDP processes scaling up to nation-wide surveys.     

Formation of water-resistant hyaluronic acid nanofibers by blowing-assisted electro-spinning and non-toxic post treatments

A unique blowing-assisted electro-spinning process has been demonstrated recently to fabricate hyaluronic acid (HA) nanofibers. In this article, effects of various experimental parameters, such as air-blowing rate, HA concentration, feeding rate of HA solution, applied electric field, and type of collector on the performance of blowing-assisted electro-spinning of HA solution were investigated. With the assistance of air-blowing, the solution-feeding rate could be increased to 40 μl/min/spinneret and the applied electric field could be decreased to 2.5 kV/cm. The optimum conditions for consistent fabrication of HA (with a molecular weight of ∼3.5 million) nanofibers involved the use of an air-blowing rate of around 70 ft³/h and a concentration range between 2.5 and 2.7% (w/v) in aqueous solution. Two benign methods to fabricate water-resistant HA nanofibrous membranes without the use of reactive chemical agents were demonstrated: (a) the exposure of HA membranes in hydrochloric acid (HCl) vapor, followed by a freezing treatment at −20 °C for 20-40 days; and (b) the immersion of HA membranes in an acidic mixture of ethanol/HCl/H₂O at 4 °C for 1-2 days. Although both methods could produce hydrophilic, substantially water-resistant HA nanofibrous membranes (the treated membranes could keep their shape intact in neutral water at 25 °C for about 1 week), the immersion method (6) was shown to be more versatile and effective. IR spectroscopy was used to investigate this ‘cross-linking’ mechanism in the solid HA membrane. Viscosity studies of acidic HA solutions under varying freezing conditions were also carried out. It was found that when the freezing time exceeded 8 h, the HA solution became gel-like and exhibited a large increase in the hydrogen-bond concentration. Thus, the resistance to water solubility could be due to the high density of hydrogen bonds in the solid HA membranes that were treated by the ‘freezing’ approach.     

AN ITERATIVE FILTERING ALGORITHM FOR NON-FOURIER FREQUENCY ESTIMATION

Abstract. We study an iterative filtering method to estimate frequencies of random Gaussian sinusoids in white noise. The method uses higher order crossings and takes advantage of a fixed point to guide the use of bandpass filtering in an attempt effectively to increase the signal-to-noise ratio. At each iteration the expected zero-crossing rate is estimated from independent time series. Convergence occurs with any prespecified probability less than one.     

Effect of Water Vapor on the Release of Fission Gases from Uranium Oxycarbide in High-Temperature, Gas-Cooled Reactor Coated Fuel Particles

The hydrolysis of uranium oxycarbide (UCO) was studied by injecting water vapor into a fuel element containing a known number of high-temperature, gas-cooled reactor (HTGR) coated particles with exposed fuel kernels. The experiments were conducted in the High Flux Isotope Reactor (HFIR) at temperatures between 700° and 1000°C, a system pressure of 200 kPa, and partial pressures of water vapor between 21 and 199 Pa. The general sequential response of the exposed fuel kernels to water vapor addition consisted of (1) a rapid release of stored fission gas with a concomitant increase in the steady-state release and (2) a period of constant steady-state release. Upon cessation of the addition of water vapor, a decline in the release to prehydrolysis values generally occurred. The release of stored fission gas was dependent on the square of the partial pressure of water vapor. The ratio of the constant steady-state release to the prehydrolysis value was independent of the partial pressure of water vapor. The time constant for the decline in the release was the same in all of the hydrolysis tests.