Modulation of extraction variables of pectin from Manilkarazapota fruit peel,its bio characterization,and comparative study using dynamic light scattering studies

Influence of variables has a great impact upon yield of pectin. The present study was organized to harmonize these variables and examine the extracted pectin. In view of this, bio-characterizion and structure analysis of pectin through FTIR was performed. Additionally, a polydispersity and particle size study was also conducted using dynamic light scattering (DLS) of the Manilkarazapota fruit peel. The best extraction variables according to the response optimization predicted model were noted as pH of 5 at 61.11°C for 90 min of heating time, which lead to a 3.7% yield. Bio-characterization revealed that pectin extracted at pH 5 has characteristics similar to HM pectin influence of methoxyl content, degree of esterification, and Galacturonic acid content at 5.11%, 73. 63%, and 77.7%, respectively. The FTIR spectrum depicted a similar surface structure to food-grade pectin. DLS studies revealed that extracted pectin at pH 5 has a particle size in the range of 390.21–421.17 nm and polydispersity (?) of 28.2%-29.3%. These findings indicate that sapodilla is a potential source of pectin for food and pharmaceutical preparation.     

Intracellular events in the "selective" transport of lipoprotein-derived cholesteryl esters

The current study utilizes human, apoE-free high density lipoprotein reconstituted with a highly specific fluorescent-cholesteryl ester probe to define the initial steps and regulatory sites associated with the "selective" uptake and intracellular itinerary of lipoprotein-derived cholesteryl esters. Bt2cAMP-stimulated ovarian granulosa cells were used as the experimental model, and both morphological and biochemical fluorescence data were obtained. The data show that cholesteryl ester provided through the selective pathway is a process which begins with a temperature-independent transfer of cholesteryl ester to the cell's plasma membrane. Thereafter transfer of the lipid proceeds rapidly and accumulates prominently in a perinuclear region (presumed to be the Golgi/membrane sorting compartment) and in lipid storage droplets of the cells. The data suggest that lipid transfer proteins (or other small soluble proteins) are not required for the intracellular transport of the cholesteryl esters, nor is an intact Golgi complex or an intact cell cytoskeleton (although the transfer is less efficient in the presence of certain microtubule-disrupting agents). The intracellular transfer of the cholesteryl esters is also somewhat dependent on an energy source in that a glucose-deficient culture medium or a combination of metabolic inhibitors reduces the efficiency of the transfer. A protein-mediated event may be required for cholesteryl ester internalization from the plasma membrane, in that N-ethylmaleimide dramatically blocks the internalization phase of the selective uptake process. Taken together these data suggest that the selective pathway is a factor-dependent, energy-requiring cholesteryl ester transport system, in which lipoprotein-donated cholesteryl esters probably flow through vesicles or intracellular membrane sheets and their connections, rather than through the cell cytosol.     

DC Magnetron-Sputtered Mo Thin Films with High Adhesion,Conductivity and Reflectance

The main challenge in the deposition of molybdenum thin films for high efficiency in copper indium gallium selenide (CIGS) modules lies in gaining an adherent coating without compromising conductivity and reflectance characteristics. In this study, Mo thin films were deposited on soda-lime glass by DC magnetron sputtering at different deposition power (55, 100, 200 and 300 W) and with high working gas pressure (2 and 4 Pa). Analytical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM) and Hall effect were employed to analyze the structure, morphology and electrical resistivity of the deposited films. Ultraviolet–visible (UV–Vis) spectrometry was performed to measure the reflectance and a cross-hatch adhesion tape test was employed to determine the adhesion behavior of deposited films. With higher sputtering power and reduced gas pressure, an increase in the crystallite size of the deposited films was observed. Films deposited at higher gas pressure were found with tensile stresses and higher adhesion with the substrate. The van der Pauw method reveals an increase in conductivity at high power and low gas pressure. Improved reflectance was achieved at moderate sputtering power and low gas pressure.     

Reduced Efficiency Roll‐Off and Improved Stability of Mixed 2D/3D Perovskite Light Emitting Diodes by Balancing Charge Injection

Perovskite light emitting diodes (PeLEDs) have reached external quantum efficiencies (EQEs) over 21%. Their EQE, however, drops at increasing current densities (J) and their lifetime is still limited to just a few hours. The mechanisms leading to EQE roll‐off and device instability require thorough investigation. Here, improvement in EQE, EQE roll‐off, and lifetime of PeLEDs is demonstrated by tuning the balance of electron/hole transport into a mixed 2D/3D perovskite emissive layer. The mixed 2D/3D perovskite layer induces exciton confinement and beneficially influences the electron/hole distribution inside the perovskite layer. By tuning the electron injection to match the hole injection in such active layer, a nearly flat EQE for J = 0.1–200 mA cm^?2, a reduced EQE roll‐off until J = 250 mA cm^?2, and a half‐lifetime of ≈47 h at J = 10 mA cm^?2 is reached. A model is also proposed to explain these improvements that account for the spatial electron/hole distributions.     

Catalytic hydrodehalogenation of halon 1211 (CBrClF2) over γ-alumina-supported Ni, Pd and Pt catalysts

The hydrodehalogenation of halon 1211 over Ni, Pd and Pt supported on γ-alumina was studied. The effect of reaction temperature and hydrogen/halon 1211 input ratio was examined. Steady state catalytic activities of Pd and Pt are very similar, and much higher than that of Ni. Hydrodehalogenation over Pd favours the formation of CH₂F₂, while Pt and Ni produce primarily CH₄ and CH₃F, respectively. Product profiles suggest that the hydrodehalogenation of halon 1211 over Pd and Pt follows a reaction mechanism which is similar to hydrodehalogenation of CFC-12. Over Ni catalysts, the primary hydrodehalogenation reactions are those which first remove one halogen (Cl or Br) and then remove two halogens (one F and either Br or Cl). The higher mobility of hydrogen atom on the surface of Pt is consistent with the observation that only trace amounts of C₂₊ hydrocarbons were detected when Pt was used compared with Pd and Ni. Increasing selectivity to CH₂F₂ with time on stream over Pd and Pt is mainly ascribed to the transformation of support alumina to partially fluorinated alumina.     

Dehydrohalogenation during pyrolysis of brominated flame retardant containing high impact polystyrene (HIPS-Br) mixed with polyvinylchloride (PVC)

Dehydrohalogenation during pyrolysis of brominated flame retardant containing polystyrene (brominated high impact polystyrene (HIPS-Br)) mixed with polyvinylchloride (PVC) was carried out in a laboratory scale batch process. Thermal and catalytic degradation of HIPS-Br mixed with PVC on carbon composite of iron oxide (TR-00301) catalyst was investigated. The thermal degradation of waste plastics (HIPS-Br/PVC) yielded liquid products with 55,000 ppm bromine and 4300 ppm chlorine content in oil. Catalytic degradation (4 g; TR-00301) of HIPS-Br/PVC waste plastics at 430 °C produced halogen-free clean oil, which can be used as a fuel oil or chemical feedstock. The main liquid products during catalytic degradation were benzene, toluene, styrene, ethyl benzene, α-methyl styrene, butyl benzene, 1,2-dimethyl benzene etc. The average carbon number of the liquid products produced during catalytic degradation (9.3) of waste plastics was less than that of the thermal degradation (10.4) and the density of liquid products was found to be lower during the catalytic degradation than the thermal degradation. The possibility of a single step catalytic process for the conversion of halogenated waste plastics into fuel oil with the simultaneous removal of chlorine and bromine content from the oil was demonstrated.     

A survey and tutorial of wireless relay network protocols based on network coding

Ever since the wireless relay network (RN) was introduced, it has led to the discovery of several new protocols, which have been consistently improved by researchers to overcome many constraints such as throughput, capacity bound, symbol error rate, outage probability, and power allocations. Meanwhile, network coding (NC) was invented as an efficient technique to address these problems. To the best of our knowledge, there has been no comprehensive discussion about wireless-RN modes in the literature. We therefore provide a tutorial concerning the basic concepts of NC, dealing with the classification of particular relay modes, and presenting new wireless-RN protocols with/without NC in this paper. Under appropriate categories (i.e., fixed and dynamic), much attention has been given to various proposed wireless-RN protocols because they may differ individually depending on their processing at relay nodes and network topology. We compare the available wireless-RN protocols with/without NC, and conclude that the wireless-RN based on NC outperforms the traditional wireless-RN in certain scenarios.     

Distribution of Pb, As, Cd, Sn and Hg in soil, sediment and surface water of the tropical river watershed, Terengganu (Malaysia)

Hydrogeochemistry and distribution of Pb, As, Cd, Sn and Hg in soils (n = 53), sediments (n = 42) and surface waters (n = 51) of the tropical Terengganu River basin, northeast coast of Peninsular Malaysia, were investigated. The order of abundance of the elements in soils followed granite > metasedimentary > Quaternary deposit ? volcanic with slight enrichment as compared to the upper continental crust. Both soils and sediments registered the order of concentration of Pb > Sn > As ? Cd ? Hg with an enrichment factor (EF) < 6 for sediments indicating slight enrichment representing the regional background and less likely due to the anthropogenic activity related input. SEM analysis revealed the presence of Malayaite (CaSnOSiO₄) explaining elevated Sn concentration (up to ∼34 mg/kg; 3 times the upper continental crust) in soils. Soil Pb distribution showed the geology as the primary control.Dissolved concentrations of As showed an increasing and Cd decreasing with distance from upstream to downstream along the river flow path. Lake surface waters registered 16 times higher Cd concentrations (average ∼ 14.21 μg/L) than the river waters, but lake sediments registered lower Cd concentration than the river sediments (average ∼ 0.45 mg/kg) revealing Eh, pH and TDS control. Dissolved average Hg concentration (∼0.04 μg/L) was measured to be lower than the tropical river waters from the Central Africa river, but higher than the Mekong and the Amazon Rivers.     

Supermacroporous poly(vinyl alcohol)-carboxylmethyl chitosan-poly(ethylene glycol) scaffold: an in vitro and in vivo pre-assessments for cartilage tissue engineering

This study aims to pre-assess the in vitro and in vivo biocompatibility of poly(vinyl alcohol)-carboxylmethyl-chitosan-poly(ethylene glycol) (PCP) scaffold. PCP was lyophilised to create supermacroporous structures. 3-(4, 5-dimethyl-thiazol-2yl)-2, 5-diphenyltetrazolium bromide (MTT) assay and immunohistochemistry (IHC) were used to evaluate the effectiveness of PCP scaffolds for chondrocytes attachment and proliferation. The ultrastructural was assessed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Extracellular matrix (ECM) formation was evaluated using collagen type-II staining, glycosaminoglycan (GAG) and collagen assays. Histological analysis was conducted on 3-week implanted Sprague–Dawley rats. The MTT, IHC, SEM and TEM analyses confirm that PCP scaffolds promoted cell attachment and proliferation in vitro. The chondrocyte-PCP constructs secreted GAG and collagen type-II, both increased significantly from day-14 to day-28 (P < 0.05). PCP scaffolds did not elicit any adverse effects on the host tissue, but were partially degraded. These results suggest that supermacroporous PCP is a biocompatible scaffold for clinical applications.