Generation of complex Gaussian beam modes in beam interaction with a planar dielectric interface

The problem of Gaussian beam interaction with a planar interface separating two semi-infinite homogeneous isotropic lossless media is considered for regular incidence, i.e., excluding the case of total internal reflection. The reflected and refracted fields are expressed in terms of the fundamental and higher order complex beam modes. These newly identified complex beam modes differ from the conventional beam modes and they describe the structure of the reflected and transmitted fields in a more convenient manner.     

Parasitic coplanar three-element dielectric resonator antennasubarray

A slot-coupled rectangular dielectric resonator antenna in the parasitic coplanar configuration is investigated experimentally. The measured results for impedance and radiation patterns are presented for the three-element case. It is found that by using suitable choice of the dimensions and offset distance of each dielectric resonator, the impedance bandwidth can be as high as three times that of the single-element structure     

Application of Millimeter Wave in Verification of Scale Model Measurement for Radar Cross Section

According to the physical optic approximation, a physical scale factor is suggested for scale model measurement of radar cross section (RCS). By this factor, the models of radar targets can be tested at the same frequency as prototype. This is significant for the lack of experimental equipment required or the problem of frequency dependency of radar absorbing materials on the objects. For the purpose of further verification and comparison, millimeter-wave is used to measure the model at the wavelength scaling down proportionally to the prototype. And the measurements of the models are also carried out at microwave band (same working wavelength with prototype). The computed results from models agree well with the data by prototype itself.     

The potential of solar-driven humidification–dehumidification desalination for small-scale decentralized water production

World-wide water scarcity, especially in the developing world, indicates a pressing need to develop inexpensive, decentralized small-scale desalination technologies which use renewable resources of energy. This paper provides a comprehensive review of the state-of-the-art in one of the most promising of these technologies, solar-driven humidification–dehumidification (HDH) desalination. Previous studies have investigated many different variations on the HDH cycle. In this paper, performance parameters which enable comparison of the various versions of the HDH cycle have been defined and evaluated. To better compare these cycles, each has been represented in psychometric coordinates. The principal components of the HDH system are also reviewed and compared, including the humidifier, solar heaters, and dehumidifiers. Particular attention is given to solar air heaters, for which design data is limited; and direct air heating is compared to direct water heating in the cycle assessments. Alternative processes based on the HDH concept are also reviewed and compared. Further, novel proposals for improvement of the HDH cycle are outlined. It is concluded that HDH technology has great promise for decentralized small-scale water production applications, although additional research and development is needed for improving system efficiency and reducing capital cost.     

Composite right/left handed artificial transmission line structures in CMOS for controlled insertion phase at 30 GHz

Two CMOS integrated circuits are presented that utilize metamaterial composite right/left handed (CRLH) transmission lines (TLs) for zero insertion phase at 30 GHz. Specifically, 2 and 3 unit cell structures are presented with controlled insertion phase that is achieved by cascading lumped element capacitors and spiral inductors in an LC network configuration defining the TL unit cells. Furthermore, the fixed TL structures suggest the possibility of zero, advanced or delayed insertion phases by element variation, or by the use of simple active components. Simulation and measured results are in good agreement with CRLH TL theory, and display a linear insertion phase and flat group delay values that are dependent on the number of unit cells with an insertion loss of ～0.8 dB per cell. These findings suggest that such high speed CRLH TLs structures can be implemented for linear array feeding networks and compact antenna designs in CMOS at millimeter wave frequencies. © 2008 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2009.     

Comparison of circular and linear polarisation radar measurements on the melting layer

Dual-polarisation radar measurements of the melting layer taken with both linear and circular polarisations are reported. Good agreement is shown between the differential reflectivity measured with linear polarisations and the corresponding quantity calculated from the circular polarisation measurement. The low degree of preferred orientation in the melting layer is shown to be consistent with the observed differential reflectivity values.     

Characteristics of aperture-coupled rectangular dielectricresonator antenna

Theoretical analysis of an aperture-coupled rectangular dielectric resonator antenna is presented. A model based on the modal expansion method and the spectral domain approach is developed. Numerical results for return losses and radiation patterns of the TE₁₁₁^y mode are compared with experimental data available in the literature and reasonable agreement between theory and experiment is obtained. This model is flexible as it enables studies to be made of the effects of parameters such as slot dimensions, slot displacement and stub length on input impedances     

Application of Millimeter Wave in Verification of Scale Model Measurement for Radar Cross Section

According to the physical optic approximation, a physical scale factor is suggested for scale model measurement of radar cross section (RCS). By this factor, the models of radar targets can be tested at the same frequency as prototype. This is significant for the lack of experimental equipment required or the problem of frequency dependency of radar absorbing materials on the objects. For the purpose of further verification and comparison, millimeter-wave is used to measure the model at the wavelength scaling down proportionally to the prototype. And the measurements of the models are also carried out at microwave band (same working wavelength with prototype). The computed results from models agree well with the data by prototype itself.     

Harmonic waves in a prestressed thin elastic tube filled with a viscous fluid

In this work a theoretical analysis is presented for wave propagation ina thin-walled prestressed elastic tube filled with a viscous fluid. Thefluid is assumed to be incompressible and Newtonian, whereas the tubematerial is considered to be incompressible, isotropic and elastic.Considering the physiological conditions that the arteries experience, sucha tube is initially subjected to a mean pressure P_i and anaxial stretch _z. If it is assumed that in the course ofblood flow small incremental disturbances are superimposed on this initialfield, then the governing equations of this incremental motion are obtainedfor the fluid and the elastic tube. A harmonic-wave type of solution issought for these field equations and the dispersion relation is obtained.Some special cases, as well as the general case, are discussed and thepresent formulation is compared with some previous works on the samesubject.     

A state‐of‐art review on performance improvement of dielectric resonator antennas

This article outlines a compressive review on investigation carried out targeting to gain, circular polarization (CP), and mutual coupling reduction in dielectric resonator antenna (DRA). The DRA has already been created a separate position in antenna engineering domain because of its adept characteristics, such as wide bandwidth, high efficiency, low‐loss, and mainly 3D‐design flexibility which is rarely available in conventional antennas. In this context, the research on gain, circular polarization, and mutual coupling are quite interesting and being carried out from the last two decades. The ultimate aim of this article is to (i) give an overview of different techniques adopted in context to gain, CP, and mutual coupling reduction; (ii) give a compressive review of notable research carried out targeting to these three characteristics; and (iii) find out the research gap concentration for furtherance of the same.