Probabilistic Wind Farms Generation Model for Reliability Studies Applied to Brazilian Sites

This paper presents a computer model for the probabilistic representation of wind farms generation for reliability studies, which can provide an annual estimation of energy production and calculate several performance indexes. The model combines the stochastic characteristics of wind speed with the operational information of the turbines, such as the failure and repair rates, representing the wind farm by a Markov process. The simulations are made with real time series of wind speed of several Brazilian regions and actual turbine models. The influence of some wind farm and installation site characteristics on the results are evaluated, such as the wind speed statistical clustering technique, the number and type of the turbines, and the failure and repair rates. The results obtained reproduce successfully the behavior of the components considered in the model     

Point/Counterpoint

POINT: AOP Will See Widespread Adoption Adrian Colyer, Rob Harrop, Rod Johnson, and Alexandre Vasseur AOP offers both the short--and long-term return on investment needed to ensure its widespread adoption. COUNTERPOINT: AOP Has Yet to Prove Its Value Danio Beuche and Cédric Beust Where is the proof that nonhierarchical modularization into aspects makes systems development cheaper or better?     

Software architecture-centric methods and agile development

The agile software development paradigm and plan-driven approaches each have their strengths and shortcomings. The former emphasizes rapid, flexible development, while the latter emphasizes project and process infrastructure. Many practitioners, particularly of agile methods, tend-to view software architecture in light of the plan-driven side of the spectrum. They think that architecture-centric methods are too much work, equating them with high-ceremony processes emphasizing document production. But many elements make up a successful development approach, including process, product, technology, people, and tools. Software architecture is part of product quality and isn't tied to a particular process, technology, culture, or tool. This article explores the relationship and synergies between architecture-centric design and analysis methods and the extreme programming framework. We chose to focus on XP because it's one of the most mature and best-known agile practices.     

Dissipative processes during cyclic hardening of spheroidal graphite cast iron

The hardening of spheroidal graphite cast irons alloyed by vanadium via chemical dispersion has been studied. Strain hardening is experimentally found to effectively occur in a cast iron with a relatively low vanadium content (0.5 wt %). Dissipative processes in cast irons with dispersed vanadium carbide inclusions are analyzed. An increase in the degree of dispersion of vanadium carbide inclusions is shown to favor more complete dissipation of the supplied energy into heat and decreases the level of damage in the material.     

Removal efficiency of subsurface vertical flow constructed wetlands for different organic loads.

Using subsurface vertical flow constructed wetlands (SSVFCWs) with intermittent loading it is possible to fulfil the stringent Austrian effluent standards regarding nitrification. For small plants (less than 500 persons) standards for ammonia nitrogen concentration have to be met at water temperatures higher than 12 degrees C, effluent concentrations and treatment efficiencies for organic matter have to be met the whole year around. According to the Austrian design standards the required surface area for SSVFCWs treating wastewater was 5 m2 per person. Within the first part of an Austrian research project the goal was to optimise, i.e. minimise the surface area requirement of vertical flow beds. Therefore, three SSVFCWs with a surface area of 20 m2 each have been operated in parallel. The organic loads applied were 20, 27 and 40 g COD/m2/d, which corresponds to a specific surface area requirement of 4, 3 and 2 m2 per PE, respectively. The paper compares the effluent concentrations and elimination efficiencies of the three parallel operated beds. It could be shown that a specific area demand of 4 m2 per person is suitable to be included in the revision of the Austrian design standard. Additionally it could be shown that during the warmer seasons (May-October) when the temperature of the effluent is higher than 12 degrees C the specific surface area might be further reduced; even 2 m2 per person has been proven to be adequate.     

The beneficial effects of storage on the quality of wastewater for irrigation: a case study in Sicily.

Although the main function of reservoirs in agriculture is to allow the storage and temporal shifting of large volumes of waters, further benefits emerge from their application in wastewater reuse systems. In fact, as observed in several other studies carried out on such complex natural systems, the storage period, under proper conditions, can lead to a significant improvement of the water quality for irrigation thanks to concurrent physical, chemical and biological processes. In order to investigate the reservoir dynamics, an experimental research was carried out in a farm reservoir (volume of 11,000 m3, maximum depth of 6.3 m and mean depth of about 5 m), receiving treated wastewater and subject to scheduled highly variable input to volume ratios, in order to observe the broadest range of behaviour responses. Specifically, over a monitoring period lasted 4 months, the reservoir was operated as a standard batch reactor in the first and third phases and as a continuous flow reactor in the second one. Based on correlation analysis between the chemical, physical and biological water parameters and operational ones, a new operative index is proposed which integrates the morphological characteristics of the tank and the management ones, and shows a significant correlation with the qualitative characteristics of the stored water.     

Hindered and compression settling: parameter measurement and modelling.

The Vesilind settling velocity function forms the basis of flux theory used both in state point analysis (for design and capacity rating) and one-dimensional dynamic models (for dynamic process modelling). This paper proposes new methods to address known shortcomings of these methods, based on an extensive set of batch settling tests conducted at different scales. The experimental method to determine the Vesilind parameters from a series of bench scale settling tests is reviewed. It is confirmed that settling cylinders must be slowly stirred in order to represent settling performance of full scale plants for the whole range of solids concentrations. Two new methods to extract the Vesilind parameters from settling test series are proposed and tested against the traditional manual method. Finally, the same data set is used to propose an extension to one-dimensional (1-D) dynamic settler models to account for compression settling. Using the modified empirical function, the model is able to describe the batch settling interface independently of the number of layers.     

Optimal Design of the High-Power Plate and Grid Modulated HF Amplifier by High Modulation Levels

The optimal design of the high power plate and grid modulated selective amplifier is examined in this paper. For the analysis purposes, the linear model of constant plate current characteristics for HF power triode is applied. The carrier wave state of the unmodulated amplifier is chosen so to enable the realization of the high levels of modulation. The results are obtained immediateZy, and the estimated error is acceptable. The estimated characteristic values of this high power and high efficiency HF amplifier are shown in the corresponding diagrams.