高功率激光装置大口径光学元件侧面清洗实验

针对高功率激光装置内部最易产生受激布里渊散射(SBS)效应的大口径取样光栅(BSG)元件,测试了经过化学刻蚀、紫外激光清洗作用处理后,大口径光学元件BSG侧面在355 nm激光辐照下的损伤阈值、损伤形态以及产生的石英颗粒气溶胶对环境污染程度的分析。结果表明:经过化学刻蚀,BSG侧面的损伤阈值提高78%,基本与通光面的损伤阈值相当,而经过紫外激光处理后的损伤阈值提升不高,仅为通光面损伤阈值的56%。侧面对比分析了相同激光能量辐照下样片侧面产生的气溶胶污染状况,结果表明紫外激光处理同样可以提高光学元件侧面产生污染物的阈值,且对光学元件性能没有影响。通过微观形貌和对通光口径影响分析表明,紫外激光清洗处理比化学刻蚀具有更好的安全性和适用性。     

神光-Ⅲ主机装置下装模块空间对接关键技术北大核心CSCD

初步分析了在建神光-Ⅲ主机装置下装模块空间对接过程,指出"对中"和"碰撞"问题是下装模块空间对接监测的关键技术。"对中"监测技术主要是将三维问题转换为二维问题,利用机器视觉扑捉特征点下装模块进行位置和姿态的判断。"碰撞"监测技术主要是利用下装模块装校过程发生碰撞必然产生"力"的作用的原理,监测碰撞点上各个方向作用力,间接反映碰撞发生程度,并将测量数据分析后反馈至对接平台执行,及时修正下装模块空间对接运动轨迹,实现了下装模块全过程的"轻碰撞"对接。     

大口径KDP晶体角度相位匹配离线测量精度研究

为满足惯性约束聚变(ICF)实验对激光驱动器高效三倍频能力的要求, 对离线测量晶体角度相位匹配方案进行了优化。采取的主要优化措施是:提高晶体准直技术能力;降低模拟小口径激光输出变化对测量不稳定性的影响。通过理论分析和对实际测量结果的系统分析,得到了晶体离线测量的不确定度:其中二倍频相位匹配角测量扩展不确定度为15.94 rad,三倍频相位匹配角测量扩展不确定度为27.8 rad,达到了较高的晶体离线测量精度要求。     

以发光二极管为背光源的平板显示对人体非视觉的影响

针对以发光二极管为背光源的平板显示对人体生理节律等非视觉的影响,采用节律因子评价模型设计了实验系统.通过全空间平均辐射法,采用国际电工委员会标准中平均图像电平的节目画面,测量显示不同图像时以发光二极管为背光源的平板显示器光辐射的节律因子.结果发现:以发光二极管为背光源的平板显示器在显示白场和大部分彩色图像时的节律因子为5.0以上,其非视觉效应比普通照明要强得多,且与显示的图像内容密切相关;该平板显示器的光学辐射对人体生理节律等非视觉具有不可忽视的影响.     

Stable single longitudinal mode erbium-doped silica fiber laser based on an asymmetric linear three-cavity structure

We present a stable linear-cavity single longitudinal mode (SLM) erbium-doped silica fiber laser. It consists of four fiber Bragg gratings (FBGs) directly written in a section of photosensitive erbium-doped fiber (EDF) to form an asymmetric three-cavity structure. The stable SLM operation at a wavelength of 1545.112 nm with a 3-dB bandwidth of 0.012 nm and an optical signal-to-noise ratio (OSNR) of about 60 dB is verified experimentally. Under laboratory conditions, the performance of a power fluctuation of less than 0.05 dB observed from the power meter for 6 h and a wavelength variation of less than 0.01 nm obtained from the optical spectrum analyzer (OSA) for about 1.5 h are demonstrated. The gain fiber length is no longer limited to only several centimeters for SLM operation because of the excellent mode-selecting ability of the asymmetric three-cavity structure. The proposed scheme provides a simple and cost-effective approach to realizing a stable SLM fiber laser.     

Effect of fused silica subsurface defect site density on light intensification

The effect of defect density on the modulation of incident laser waves is investigated. First, based on the actual defect distribution in the subsurface of fused silica, a three-dimensional (3D) grid model of defect sites is constructed. The 3D finite-difference time-domain method is developed to solve the Maxwell equations. Then the electrical field intensity in the vicinity of the defect sites in the subsurface of fused silica is numerically calculated. The relationships between the maximal electrical field intensity in fused silica and the geometry of the defect sites are given. The simulated results reveal that the modulation becomes more remarkable with an increase of the defect density. In addition, the effect of the distribution mode of defects on modulation is discussed. Meanwhile, the underlying physical mechanism is analyzed in detail.     

Role of chelating agent in chemical and fluorescent properties of SnO2 nanoparticles

A modified polyacrylamide gel route is applied to synthesize SnO2 nanoparticles. High-quality SnO2 nanoparticles with a uniform size are prepared using different chelating agents. The average particle size of the samples is found to depend on the choice of the chelating agent. The photoluminescence spectrum detected at λex = 230 nm shows a new peak located at 740 nm due to the surface defect level distributed at the nanoparticle boundaries.     

热丝辅助双偏压氢等离子体制造金刚石锥状表面研究

利用热丝辅助双偏压氢等离子体对化学气相沉积金刚石薄膜进行了纳米尺度上的表面改装,制造出锥状金刚石列阵.金刚石薄膜内在的柱状结构使氢离子在刻蚀薄膜时产生非均匀的刻蚀速率,对锥状表面的形成起着重要作用.另一方面,溅射出的含碳粒子会发生二次沉积,最终的特征表面形貌取决于刻蚀与含碳基团再沉积之间的相互竞争.栅极的使用影响基底区域放电的伏安特性,改变栅极电流可以对形成的金刚石特征表面结构进行有效调节.在处理过程中少量掺入甲烷,提高了金刚石表面附近的含碳基团浓度,促进二次成核,进而诱发均匀分布的锥状列阵. 关键词： 等离子体 表面 金刚石薄膜     

盐酸氯丙嗪1H NMR、 13C NMR谱的归属及结构表征

通过运用¹H-¹H COSY(¹H-¹H COrrelation SpectroscopY)、TOCSY(TOtal Correlation SpectroscopY)、HSQC(Heteronuclear Single Quantum Correlation)、HMBC (Heteronuclear Multiple Bond Correlation)、NOESY(Nuclear Overhauser Enhancement SpectroscopY)等多种二维核磁技术,对盐酸氯丙嗪（Chlorpromazine hydrochloride CPZ· HCl）在CDCl₃、CD₃COCD₃和D₂O三种溶剂中的¹H、¹³C NMR谱进行了准确归属（重点集中于谱峰重叠程度较高的芳香族区域）．实验表明：杂环上N与苯环存在部分共轭;在CDCl₃、CD₃COCD₃中,侧链卷曲至芳环上方处于屏蔽区,且侧链上N为较稳定的四面体构型;比较了CPZ· HCl在不同溶剂与浓度下的¹H NMR谱的变化,对文献中其核磁共振谱（特别是芳香区的谱峰）归属的争议作了解释．量子化学计算结果与实验结果相吻合．     

生长温度和结构参数对InGaAs／GaAs量子阱光学特性的影响

研究了不同生长温度下制备的In0.15Ga0.85As/GaAs应变量子阱的PL谱,结果表明,生长温度越高,In偏析和In-Ga互混越严重,同时,导致更多的In脱附,PL谱发光峰蓝移。对不同In含量的和不同InGaAs厚度的InGaAs/GaAs量子阱进行PL谱测试,分析表明In含量<0.2,生长温度低于560℃时,In含量和InGaAs层量子阱的厚度对In偏析、脱附和In-Ga互混基本没有影响。