Occurrence and chemical composition of amphiboles and related minerals in corundum-bearing mafic rock from the Horoman Peridotite Complex, Japan

A corundum-bearing mafic rock in the Horoman Peridotite Complex, Japan, was derived from upper mantle conditions to lower crustal conditions with surrounding peridotites. The amphiboles found in the rock are classified into 3 types: (1) as interstitial and/or poikilitic grains (Green amphibole), (2) as a constituent mineral of symplectitic mineral aggregates with aluminous spinel at grain boundary between olivine and plagioclase (Symplectite amphibole) and (3) as film-shaped thin grains, usually less than 10 μm in width, at grain boundary between olivine and clinopyroxene (Film-shaped amphibole). The Film-shaped amphibole is rarely associated with orthopyroxene extremely low in Al₂O₃, Cr₂O₃ and CaO (Low-Al OPX). These minerals were formed by infiltration of SiO₂- and volatile-rich fluids along grain boundaries after the rock was recrystallized at olivine-plagioclase stability conditions, i.e. the late stage of the exhumation of the Horoman Complex.

Chondrite-normalized rare earth element patterns and primitive mantle-normalized trace-element patterns of the Green amphibole and clinopyroxene are characterized by LREE-depleted patterns with Eu positive and negative anomalies of Zr and Hf. These geochemical characteristics of the constituent minerals were inherited from original whole-rock compositions through a reaction involving both pre-existing clinopyroxene and plagioclase. We propose that the fluids were originally rich in a SiO₂ component but depleted in trace-elements. Dehydration of the surrounding metamorphic rocks in the Hidaka metamorphic belt, probably related to intrusion of hot peridotite body into the Hidaka crust, is a plausible origin for the fluids.     

Upper and middle crustal deformation of an arc–arc collision across Hokkaido, Japan, inferred from seismic refraction/wide-angle reflection experiments

The Hidaka Collision Zone (HCZ), central Hokkaido, Japan, is a good target for studies of crustal evolution and deformation processes associated with an arc–arc collision. The collision of the Kuril Arc (KA) with the Northeast Japan Arc (NJA), which started in the middle Miocene, is considered to be a controlling factor for the formation of the Hidaka Mountains, the westward obduction of middle/lower crustal rocks of the KA (the Hidaka Metamorphic Belt (HMB)) and the development of the foreland fold-and-thrust belt on the NJA side. The “Hokkaido Transect” project undertaken from 1998 to 2000 was a multidisciplinary effort intended to reveal structural heterogeneity across this collision zone by integrated geophysical/geological research including seismic refraction/reflection surveys and earthquake observations. An E–W trending 227 km-long refraction/wide-angle reflection profile found a complicated structural variation from the KA to the NJA across the HCZ. In the east of the HCZ, the hinterland region is covered with 4–4.5 km thick highly undulated Neogene sedimentary layers, beneath which two eastward dipping reflectors were imaged in a depth range of 10–25 km, probably representing the layer boundaries of the obducting middle/lower crust of the KA. The HMB crops out on the westward extension of these reflectors with relatively high Vp (>6.0 km/s) and Vp/Vs (>1.80) consistent with middle/lower crustal rocks. Beneath these reflectors, more flat and westward dipping reflector sequences are situated at the 25–27 km depth, forming a wedge-like geometry. This distribution pattern indicates that the KA crust has been delaminated into more than two segments under our profile. In the western part of the transect, the structure of the fold-and-thrust belt is characterized by a very thick (5–8 km) sedimentary package with a velocity of 2.5–4.8 km/s. This package exhibits one or two velocity reversals in Paleogene sedimentary layers, probably formed by imbrication associated with the collision process. From the horizontal distribution of these velocity reversals and other geophysical/geological data, the rate of crustal shortening in this area is estimated to be greater than 3–4 mm/year, which corresponds to 40–50% of the total convergence rate between the NJA and the Eurasian Plate. This means that the fold-and-thrust belt west of the HCZ is absorbing a large amount of crustal deformation associated with plate interaction across Hokkaido Island.     

Origin of cyclicity in Triassic-Jurassic radiolarian bedded cherts of the Mino accretionary complex from Japan

Abstract The abundance of magnetic microspherules in a Triassic-Jurassic continuous sequence of alternating chert and shale beds in the Mino accretionary complex, central Japan, was measured systematically. Depending on time, the magnetic microspherules extracted from shale beds change in abundance considerably from the minimum 0.9ppm/cm³ at latest Triassic ( ca 208Ma) and the maximum 75ppm/cm³ at late Early Jurassic ( ca 187Ma); however, the abundance is always higher approximately 10–100 (average 70) times than those from adjacent chert bed at any stratigraphic horizon. Such systematic difference reveals the origin of radiolarian bedded chert as cyclic-rapid accumulation of biogenic SiO₂ under extremely slow accumulative environments of shale with probable aeolian dust in origin. The accumulation data for individual shale and chert beds were obtained based on the microspherule abundance and radiolarian biostratigraphy, i.e., ca 0.018g/cm²Ka for lower Jurassic shale beds and ca 1.9g/cm²Ka for adjacent chert beds.
Duration time to make a chert-shale couplet corresponds to a dominantly 15–20Ka interval (average 23 Ka) in Upper Triassic bedded cherts with a low paleolatitude, whereas a 40–45 Ka interval (average 42 Ka) in Lower Jurassic ones which may been formed in higher latitude than Triassics before the final accretion to the Asian continental margin. Depending on paleolatitude, the cyclicity of 23 and 42 Ka may correspond to Milankovitch cycles which have been well documented in deep-sea sediments.     

Evolution of spinel–pyroxene symplectite in spinel–lherzolites from the Horoman Complex,Japan

We examined the textural and geochemical characteristics of spinel-pyroxene symplectites in spinel-lherzolites collected from the lowest, middle, and upper parts (LZ1, MZ, and UZ1, respectively) of the Horoman Peridotite Complex, Japan. The modal proportion of the minerals within symplectite is almost the same, i.e., orthopyroxene:clinopyroxene:spinel = 2:1:1. The size of the symplectite minerals increases from the lowest through to the middle to the upper parts in the complex. The reconstructed major element composition of the bulk symplectites is intermediate between pyrope-rich garnet and olivine. The model garnet compositions of the LZ1satisfies garnet stoichiometry and those of the MZ and UZ1 are not consistent with garnet stoichiometry. The primitive mantle-normalized pattern in trace elements for the LZ1 symplectite is similar to that of pyrope-rich garnet from fertile peridotites, particularly in its enrichment of HREE and a positive Zr anomaly. Thus, the LZ1 symplectite has inherited both major and trace element signatures from pre-existing garnet whereas the compositions of the MZ and UZ1 symplectites were modified during and/or after breakdown of pre-existing garnet. Geochemical and textural variations of symplectites might basically correspond to temperature differences within the complex during upwelling of the Horoman Complex. The basal part of the complex (LZ1) experienced the lowest temperature decompression path in the complex, which resulted in less textural and chemical modification. On the other hand, the higher part of the complex (UZ1) experienced a relatively higher temperature decompression path than other parts of the complex, resulting in chemical equilibration among the constituent minerals and coarsening of the symplectite minerals. Selective enrichment of Sr and LREE in the symplectite may indicate that the metasomatism by a Sr- and LREE-rich melt/fluid occurred during and/or after the formation of symplectite.     

Sand suction mechanism in artificial beach composed of rubble mound breakwater and reclaimed sand area

An artificial beach has been constructed compensating for losing of the natural one caused by the development of coastal area. In this paper, the hydraulic model tests are carried out to investigate the suction phenomenon on the artificial beach constituted of rubble mound breakwater with gravel and the reclaimed sand area. In addition, the numerical model for waves, structures and seabed interaction as well as the numerical method based on the u–p approximation of the Biot equations is developed for investigation of suction mechanism. After verification of the numerical models by comparing numerical results with experimental data, the numerical models are further used to clarify the detailed suction mechanism of the reclaimed sand. The factors that affect the suction phenomenon are examined experimentally and their critical values are presented. Also, it can be pointed out that the vertical discharge velocity as well as the volumetric strain around the still water level of the boundary between the breakwater and the beach gets up to the critical value, the reclaimed sand starts to flow out to the offshore, and it finally leads to caves and cave-ins in the reclaimed zone.     

Cold air formation and advection over Eurasia during “dzud” cold disaster winters in Mongolia

Large negative temperature anomalies due to cold air advection have been observed over the Eurasian continent in recent years. During the 2009/2010 winter, a large amount of snow accumulated across Central Asia and China, which along with a strong cold air outbreak, resulted in extremely high livestock mortality in Mongolia. The present study examined the surface inversion development over the Eurasian continent in terms of the cold air advection, accumulation, and breaking processes at ground level. Meteorological analyses shown trends toward earlier onsets of snow and subsequent cold air advection from the Arctic through western Siberia during the last decade, which is a possible driver of the persistent enhanced surface cooling observed in mid-winter in Mongolia. Cyclones are shown to be drivers of early snowfall onset at the beginning of winter and the subsequent migration of cold air from the Arctic, and are thus the key to understanding and predicting the frequency and intensity of persistent surface cooling, which is a substantial physical precursor for the cold disaster in Mongolia “dzud.”     

Indicator of paleosalinity: Sedimentary sulfur and organic carbon in the Jurassic–Cretaceous Tetori Group,central Japan

A simple geochemical technique using the ratio of total sulfur (TS) to total organic carbon (TOC) was successfully used to reconstruct paleoenvironments in the Jurassic–Cretaceous Tetori Group, central Japan. The TS to TOC ratio is often employed as an effective parameter to separate modern marine or brackish sediments from freshwater deposits. To test the TS/TOC method for paleoenvironmental interpretation of the Tetori Group, we first analyzed TS/TOC for samples for which depositional conditions (i.e. marine, brackish or freshwater) had been recognized paleontologically. The results indicate that the method can effectively separate sedimentary rocks deposited under freshwater from marine and brackish settings. Once we had established the effectiveness of this method, we applied it to three sections of the Tetori Group, central Japan. Stratigraphic fluctuations in TS/TOC values revealed episodic incursions of marine or brackish conditions in the dominantly freshwater depositional sequence in the middle of the Jobu Formation of the Itoshiro Subgroup at the Izumi section, Fukui Prefecture. The same paleoenvironment is also suggested to occur at the top of the Tetori Group in the Tateyama section, Toyama Prefecture. This research provides important information to paleogeographers who currently lack evidence from facies fossils to indicate if the uppermost part of the Tetori Group represents marine or brackish settings. A chemostratigraphy of TS/TOC parameters potentially could provide a correlation among Jurassic–Cretaceous sequences along continental margins over East Asia.     

Analysis software for upper atmospheric data developed by the IUGONET project and its application to polar science

To comprehensively understand the Arctic and Antarctic upper atmosphere, it is often crucial to analyze various data that are obtained from many regions. Infrastructure that promotes such interdisciplinary studies on the upper atmosphere has been developed by a Japanese inter-university project called the Inter-university Upper atmosphere Global Observation Network （1UGONET）. The objective of this paper is to describe the infrastructure and tools developed by IUGONET. We focus on the data analysis software. It is written in Interactive Data Language （IDL） and is a plug-in for the THEMIS Data Analysis Software suite （TDAS）, which is a set of IDL libraries used to visualize and analyze satellite- and ground-based data. We present plots of upper atmospheric data provided by IUGONET as examples of applications, and verify the usefulness of the software in the study of polar science. We discuss IUGONET＇s new and unique developments, i.e., an executable file of TDAS that can run on the IDL Virtual Machine, IDL routines to retrieve metadata from the IUGONET database, and an archive of 3-D simulation data that uses the Common Data Format so that it can easily be used with TDAS.     

Mass Concentration and Mineralogical Characteristics Aerosol Particles Collected at Dunhuang During ACE-Asia

Measurements were performed in spring 2001 and 2002 to determine the characteristics of soil dust in the Chinese desert region of Dunhuang, one of the ground sites of the Asia-Pacific Regional Aerosol Characterization Experiment (ACE-Asia). The mean mass concentrations of total suspended particle matter during the spring of 2001 and 2002 were 317 μg m-3 and 307 μg m-3, respectively. Eleven dust storm events were observed with a mean aerosol concentration of 1095 μg m-3, while the non-dusty days with calm or weak wind speed had a background aerosol loading of 196 μg m-3 on average in the springtime.The main minerals detected in the aerosol samples by X-ray diffraction were illite, kaolinite, chlorite, quartz,feldspar, calcite and dolomite. Gypsum, halite and amphibole were also detected in a few samples. The mineralogical data also show that Asian dust is characterized by a kaolinite to chlorite (K/C) ratio lower than 1 whereas Saharan dust exhibits a K/C ratio larger than 2. Air mass back-trajectory analysis show that three families of pathways are associated with the aerosol particle transport to Dunhuang, but these have similar K/C ratios, which further demonstrates that the mineralogical characteristics of Asian dust are different from African dust.