Wavelet analysis of non-Gaussian anisotropies from primordial voids in simulated maps of the Cosmic Microwave Background

Phase transitions taking place during the inflationary epoch give rise to bubbles of true vacuum embedded in the false vacuum. These bubbles can imprint a distinctive signal on the Cosmic Microwave Background (CMB). We evaluate the feasibility of detecting these signatures with wavelets in CMB maps, such as those that will be made available by the European Space Agency’s (ESA) Planck mission.     

Inclination of large coronal loops observed by TRACE

A TRACE field of view well inside the solar disk shows very well defined large loops, likely to be very inclined to the solar surface. On the other hand there is little evidence of large loops perpendicular to the solar surface. We show that this does not mean that most large loops have such large inclination but that perpendicular loops are much less visible to TRACE, because of density stratification. We quantitatively evaluate this effect by modeling in detail loops with different inclinations.     

Spectroscopic Characterization of Organic Structures and Organic‐Inorganic Interactions in Paper Mill Sludge

The organic composition and organic‐inorganic interaction in paper mill sludge (PS) solvent extracts (hexane, ethyl acetate, acetone and ethanol) and humic fractions, humic acid (HA) and humin (HU) were studied by electron paramagnetic resonance spectroscopy (EPR), proton and carbon‐13 nuclear magnetic resonance spectroscopy (¹H NMR; ¹³C NMR), Fourier‐transformed infrared spectroscopy (FTIR), and ultraviolet‐visible spectroscopy (UV‐vis). The strategy of fractionating the PS, sequentially, with organic solvents of increasing polarity is a reliable analytical procedure for humic substance sample separation because it results in more purified fractions. FTIR, ¹H NMR and ¹³C NMR results showed that hexane extract consisted mainly of aliphatic hydrocarbon structures. Their contents in the extracts decreased as the polarity of the extracting solvent increased and the content of oxygen functional groups increased. Carboxylic and carboxylate functional groups were found in the acetone extract, and ester and ether functions were predominantly found in the ethanol extract. EPR spectra revealed some Fe³⁺ complexes with rhombic structure (g₁ = 4.3; g₂ = 9.0) in the humic fractions and in all solvent extracts, except hexane. Quasi‐octahedral Fe³⁺ complexes (g = 2.3; ΔH_pp ≤ 400 G) were found in the HU fraction and in the acetone extract. The organic free radical content in the HA fraction was higher than the non‐fractionated PS sample and HU fraction.     

Midlittoral polychaete communities in the Eastern Mediterranean Sea: new information from the implementation of the Natural Geography in Shore Areas (NaGISA) protocol and comparisons at local and regional scales

The aim of this study was to attempt to fill current knowledge gaps on midlittoral Mediterranean biodiversity at local and regional scales, by using benthic polychaetes as a model taxon. Two different data sets were analysed: (i) a quantitative data set from the two Natural Geography in Shore Areas (NaGISA) study sites in Crete and (ii) a qualitative data set from multiple sites across the Mediterranean. At the local scale, the results provide evidence that (i) discrete species communities are formed in midlittoral Mediterranean habitats, which vary by geographical location and year, depending on the scale of observation; (ii) macrophyte coverage and Chl‐a are the only environmental variables associated, albeit weakly, with the above pattern; (iii) although naturally disturbed, the Cretan NaGISA sites do not seem to experience any anthropogenic stress; (iv) environmental heterogeneity and history seem to be much less important in shaping the polychaete communities than inter‐specific interactions; however, it is not possible to specify at this stage whether local or regional processes or even their interactions may shape the polychaete communities. At the regional scale, the results indicate that (i) the only factor that seems to be involved in the regional pattern is the identity of the study providing the data sets, which implies variability and bias in how research projects are carried out, from the sampling design through to data collection and analysis; (ii) the Cretan NaGISA sites may be considered as representative of the habitat in the Mediterranean, under certain conditions.     

SVME: an ensemble of support vector machines for detecting oil spills from full resolution MODIS images

This paper addresses oil spill detection from remotely sensed optical images. In particular, it focuses on the automatic classification of regions of interest (ROIs) in two classes, namely oil spills or look-alikes. Candidate regions and the corresponding boundaries have been manually identified from full resolution Moderate Resolution Imaging Spectroradiometer images, related to the Mediterranean Sea over the years 2008 and 2009. Then, a set of features has been extracted from each ROI, allowing to formulate the oil spill detection problem as a two-class classification task on the provided regions (i.e. using a supervised learning strategy). Since ROI classification is challenging, some desired characteristics for the classification algorithm are first identified, such as accuracy, robustness, etc. Then, a solution (called SVME) is provided: it is based on an ensemble of incremental/decremental cost-oriented Support Vector Machines, aggregated with the Receiving Operating Characteristic (ROC) convex hull method in the ROC space. Such a solution addresses all the desired characteristics. Finally, the results obtained on the collected dataset are shown. The importance of this study is the devising of a powerful classification technique that may have an impact on optical oil spill detection from space, especially if fused with satellite synthetic aperture radar data. Moreover, it is shown how the proposed system can be used as a decision support tool, to help a junior operator in making more reliable detections.     

Classifying zones of suitability for manual drilling using textural and hydraulic parameters of shallow aquifers: a case study in northwestern Senegal

A method is proposed that uses analysis of borehole stratigraphic logs for the characterization of shallow aquifers and for the assessment of areas suitable for manual drilling. The model is based on available borehole-log parameters: depth to hard rock, depth to water, thickness of laterite and hydraulic transmissivity of the shallow aquifer. The model is applied to a study area in northwestern Senegal. A dataset of boreholes logs has been processed using a software package (TANGAFRIC) developed during the research. After a manual procedure to assign a standard category describing the lithological characteristics, the next step is the automated extraction of different textural parameters and the estimation of hydraulic conductivity using reference values available in the literature. The hydraulic conductivity values estimated from stratigraphic data have been partially validated, by comparing them with measured values from a series of pumping tests carried out in large-diameter wells. The results show that this method is able to produce a reliable interpretation of the shallow hydrogeological context using information generally available in the region. The research contributes to improving the identification of areas where conditions are suitable for manual drilling. This is achieved by applying the described method, based on a structured and semi-quantitative approach, to classify the zones of suitability for given manual drilling techniques using data available in most African countries. Ultimately, this work will support proposed international programs aimed at promoting low-cost water supply in Africa and enhancing access to safe drinking water for the population.     

In‐Situ Sonication for Enhanced Recovery of Aquifer Microbial Communities

Sampling methods for characterization of microbial communities in aquifers should target both suspended and attached microorganisms (biofilms). We investigated the effectiveness and reproducibility of low‐frequency (200 Hz) sonication pulses on improving extraction efficiency and quality of microorganisms from a petroleum‐contaminated aquifer in Studen (Switzerland). Sonication pulses at different power levels (0.65, 0.9, and 1.1 kW) were applied to three different groundwater monitoring wells. Groundwater samples extracted after each pulse were compared with background groundwater samples for cell and adenosine tri‐phosphate concentration. Turbidity values were obtained to assess the release of sediment fines and associated microorganisms. The bacterial community in extracted groundwater samples was analyzed by terminal‐restriction‐fragment‐length polymorphism and compared with communities obtained from background groundwater samples and from sediment cores. Sonication enhanced the extraction efficiency up to 13‐fold, with most of the biomass being associated with the sediment fines extracted with groundwater. Consecutive pulses at constant power were decreasingly effective, while pulses with higher power yielded the best results both in terms of extraction efficiency and quality. Our results indicate that low‐frequency sonication may be a viable and cost‐effective tool to improve the extraction of microorganisms from aquifers, taking advantage of existing groundwater monitoring wells.     

A new method for the determination of the specific kinetic energy (SKE) released to pyroclastic particles at magmatic fragmentation: theory and first experimental results

Brittle magmatic fragmentation plays a crucial role in explosive eruptions. It represents the starting point of hazardous explosive events that can affect large areas surrounding erupting volcanoes. Knowing the initial energy released during this fragmentation process is fundamental for the understanding of the subsequent dynamics of the eruptive gas-particle mixture and consequently for the forecasting of the erupting column’s behavior. The specific kinetic energy (SKE) of the particles quantifies the initial velocity shortly after the fragmentation and is therefore a necessary variable to model the gas-particle conduit flow and eruptive column regime. In this paper, we present a new method for its determination based on fragmentation experiments and identification of the timings of energy release. The results obtained on compositions representative for basaltic and phonolitic melts show a direct dependence on magma material properties: poorly vesiculated basaltic melts from Stromboli show the highest SKE values ranging from 7.3 to 11.8 kJ/kg, while experiments with highly vesiculated samples from Stromboli and Vesuvius result in lower SKE values (3.1 to 3.8 kJ/kg). The described methodology presents a useful tool for quantitative estimation of the kinetic energy release of magmatic fragmentation processes, which can contribute to the improvement of hazard assessment.     

Paleomagnetic dating of the most recent silicic eruptive activity at Pantelleria (Strait of Sicily)

We report on the paleomagnetism of ten sites in the products of the most recent silicic eruptive cycle of Pantelleria, Strait of Sicily. Previously radiometrically dated at 5–10 ka, our comparison with proxies for geomagnetic field directions allows us to narrow considerably the time window during which these eruptions occurred. The strongly peralkaline composition causes the magmas to have low viscosities, locally resulting in strong agglutination of proximal fall deposits. This allows successful extraction of paleomagnetic directions from the explosive phases of eruptions. One of our sites was located in the Serra della Fastuca fall deposit, produced by the first explosive event of the eruptive cycle. The other nine sites were located in the most recent explosive (pumice fall and agglutinate from Cuddia del Gallo and Cuddia Randazzo) and effusive (Khaggiar lava) products. The (very similar) paleomagnetic directions gathered from eight internally consistent sites were compared to reference geomagnetic field directions of the last 5–10 ka. Directions from Cuddia del Gallo agglutinate and Khaggiar flows translate into 5.9- to 6.2-ka ages, whereas the Fastuca pumices yield a slightly older age of 6.2–6.8 ka. Hence, the most recent silicic eruptive cycle lasted at most a millennium and as little as a few centuries around 6.0 ka. Paleomagnetically inferred ages are in good agreement with published (and calibrated by us) ¹⁴C dates from paleosols/charcoals sampled below the studied volcanic units, whereas K/Ar data are more scattered and yield ∼30% older ages. Our data show that the time elapsed since the most recent silicic eruptions at Pantelleria is comparable to the quiescence period separating the two latest volcanic cycles.     

Hollow bridge-pier properties for response spectrum analysis

The present paper proposes equivalent stiffness and energy dissipation properties of reinforced concrete hollow bridge piers to be used in the context of response spectrum performance based assessment and design. The work is carried out by performing parametric numerical analysis using a 2D fibre model calibrated against experimental results and by varying the longitudinal steel reinforcement ratio, height over width ratio, normalised axial force, level of confinement and concrete class of a rectangular hollow section reinforced with Tempcore B500C steel. The results of the analysis are given in the form of charts and closed form expressions for the yield curvature and moment, ultimate ductility, post yielding stiffness ratio and energy dissipated of the section, and are translated to the member level through the plastic hinge length approach. Likewise, the parameters of a Takeda model derived from the parametric analysis are given for use in nonlinear time history analysis.