Development of calibration models for quality control in the production of ethylene/propylene copolymers by FTIR spectroscopy,multivariate statistical tools,and artificial neural networks

Principal component regression (PCR), partial least squares (PLS), StepWise ordinary least squares regression (OLS), and back‐propagation artificial neural network (BP‐ANN) are applied here for the determination of the propylene concentration of a set of 83 production samples of ethylene–propylene copolymers from their infrared spectra. The set of available samples was split into (a) a training set, for models calculation; (b) a test set, for selecting the correct number of latent variables in PCR and PLS and the end point of the training phase of BP‐ANN; (c) a production set, for evaluating the predictive ability of the models. The predictive ability of the models is thus evaluated by genuine predictions. The model obtained by StepWise OLS turned out to be the best one, both in fitting and prediction. The study of the breakdown number of samples to be included in the training set showed that at least 52 experiments are necessary to build a reliable and predictive calibration model. It can be concluded that FTIR spectroscopy and OLS can be properly employed for monitoring the synthesis or the final product of ethylene–propylene copolymers, by predicting the concentration of propylene directly along the process line. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

The main parameters of electrospark alloying of steel 45 with anodes made from Ni – Cr – Al – Y alloys have been investigated. The anodes were fabricated by casting and hot pressing. The highest values of the mass transfer coefficient were observed in the case of electrospark alloying with hot-pressed alloys. Microstructure and x-ray phase analyses of electrospark coatings revealed the presence of solid solutions based on nickel, iron, chromium as well as intermetallic compounds. Coatings obtained by electrospark alloying with hot-pressed alloy are more wear-resistant than are coatings obtained by alloying with cast alloys.     

Microfluidic motion for a direct investigation of solvent interactions with PDMS microchannels

Solid surface/liquid interactions play an important role in microfluidics and particularly in manipulation of films, drops and bubbles, a basic requirement for a number of lab-on-chip applications. The behavior of solvents in coated microchannels is difficult to be predicted considering theories; therefore, experimental methods able to estimate the properties at the interface in real time and during the operational regime are amenable. Here, we propose to use an experimental setup to evaluate the effective dynamics of solvents inside PDMS microchannels. The influence of the solvent properties as well as of the channel wall’s wettability on the fluid movements was evaluated. Modification of the channel properties was achieved by introducing Teflon coatings that allow producing stable hydrophobic microchannel walls. The results were fitted according to Washburn-type power-law and compared with theoretical calculations of the parameter β that expresses the dependence of capillary dynamics on surface tension γ, liquid viscosity η, contact angles θ and the hydraulic radius R _H. A comparison between the calculated and the experimental values reveled that parameters other than the contemplated ones influenced the measurements. The main parameter that affects the flow of solvents such as water, methanol ethanol, dimethylformamide, acetonitrile and acetone was found to be the γ/η ratio. Considering these results, the investigation tool described here is believed to be promising to predict the dynamics of common organic solvents inside integrated functional fluidic devices and to accurately control solvent flow, particularly in capillary-driven pumpless systems, a basic requirement for widening the application range of PDMS lab-on-chip devices.     

IgGs-Abzymes from the Sera of Patients with Multiple Sclerosis Recognize and Hydrolyze miRNAs

Autoantibodies-abzymes hydrolyzing DNA, myelin basic protein, and oligosaccharides have been revealed in the sera of patients with multiple sclerosis (MS). In MS, specific microRNAs are found in blood and cerebrospinal fluid, which are characterized by increased expression. Autoantibodies, specifically hydrolyzing four different miRNAs, were first detected in the blood of schizophrenia patients. Here, we present the first evidence that 23 IgG antibodies of MS patients effectively recognize and hydrolyze four neuroregulatory miRNAs (miR-137, miR-9-5p, miR-219-2-3p, and miR-219-5p) and four immunoregulatory miRNAs (miR-21-3p, miR-146a-3p, miR-155-5p, and miR-326). Several known criteria were checked to show that the recognition and hydrolysis of miRNAs is an intrinsic property of MS IgGs. The hydrolysis of all miRNAs is mostly site-specific. The major and moderate sites of the hydrolysis of each miRNA for most of the IgG preparations coincided; however, some of them showed other specific sites of splitting. Several individual IgGs hydrolyzed some miRNAs almost nonspecifically at nearly all internucleoside bonds or demonstrated a combination of site-specific and nonspecific splitting. Maximum average relative activity (RA) was observed in the hydrolysis of miR-155-5p for IgGs of patients of two types of MS—clinically isolated syndrome and relapsing-remitting MS—but was also high for patients with primary progressive and secondary progressive MS. Differences between RAs of IgGs of four groups of MS patients and healthy donors were statistically significant (p < 0.015). There was a tendency of decreasing efficiency of hydrolysis of all eight miRNAs during remission compared with the exacerbation of the disease.     

Engineering of Janus-Like Dendrimers with Peptides Derived from Glycoproteins of Herpes Simplex Virus Type 1: Toward a Versatile and Novel Antiviral Platform

Novel antiviral nanotherapeutics, which may inactivate the virus and block it from entering host cells, represent an important challenge to face viral global health emergencies around the world. Using a combination of bioorthogonal copper-catalyzed 1,3-dipolar alkyne/azide cycloaddition (CuAAC) and photoinitiated thiol–ene coupling, monofunctional and bifunctional peptidodendrimer conjugates were obtained. The conjugates are biocompatible and demonstrate no toxicity to cells at biologically relevant concentrations. Furthermore, the orthogonal addition of multiple copies of two different antiviral peptides on the surface of a single dendrimer allowed the resulting bioconjugates to inhibit Herpes simplex virus type 1 at both the early and the late stages of the infection process. The presented work builds on further improving this attractive design to obtain a new class of therapeutics.     

A low-cost real time virtual system for postural stability assessment at home

Background and objective

The degeneration of the balance control system in the elderly and in many pathologies requires measuring the equilibrium conditions very often. In clinical practice, equilibrium control is commonly evaluated by using a force platform (stabilometric platform) in a clinical environment.In this paper, we demonstrate how a simple movement analysis system, based on a 3D video camera and a 3D real time model reconstruction of the human body, can be used to collect information usually recorded by a physical stabilometric platform.

Methods

The algorithm used to reconstruct the human body model as a set of spheres is described and discussed. Moreover, experimental measurements and comparisons with data collected by a physical stabilometric platform are also reported. The measurements were collected on a set of 6 healthy subjects to whom a change in equilibrium condition was stimulated by performing an equilibrium task.

Results

The experimental results showed that more than 95% of data collected by the proposed method were not significantly different from those collected by the classic platform, thus confirming the usefulness of the proposed system.

Conclusions

The proposed virtual balance assessment system can be implemented at low cost (about 500$) and, for this reason, can be considered a home use medical device. On the contrary, astabilometric platform has a cost of about 10,000$ and requires periodical calibration. The proposed system does not require periodical calibration, as is necessary for stabilometric force platforms, and it is easy to use. In future, the proposed system with little integration can be used, besides being an emulator of a stabilometric platform, also to recognize and track, in real time, head, legs, arms and trunk, that is to collect information actually obtained by sophisticated optoelectronic systems.     

Polymerization characteristics of a dye of anthraquinone

A technical dye of the anthraquinone type was analyzed by GPC, mass spectroscopy, and elemental analysis. Along with the polymerizable component, N-[4-amino-3-methoxyanthraquinonyl-(1)] methacrylamide (I), it contained a saturated admixture, N-[4-amino-3-methoxyanthraquinonyl-(1)]-2-chloro-2-methylpropionamide (II). The homopolymerization of I was carried out, and admixture II was isolated and characterized. The copolymerization of the dye with styrene and methyl methacrylate was verified, and the retardation effect of II on the polymerization of these monomers was evaluated.     

The dynamic contact area of elastomers at different velocities

The friction in tribo-systems that contain viscoelastic materials, such as elastomers, is relevant for a large number of applications. Examples include tyres, hoses, transmission and conveyor belts. To quantify the friction in these applications, one must first understand the contact behaviour of such viscoelastic materials, both in static and in dynamic situations. This work discusses an experimental study into the change of the contact area with the sliding velocity and relates the change in contact area with the mechanical properties of the elastomer. The results show that for a tribo-system containing an elastomer, there is a threshold velocity, above which the size of the contact area significantly reduces.     

Open to a Select Few? Matching Partners and Knowledge Content for Open Innovation Performance

The purpose of the paper is to illuminate the costs and benefits of crossing firm boundaries in inbound open innovation (OI) by determining the relationships among partner types, knowledge content and performance. The empirical part of the study is based on a survey of OI collaborations answered by R&D managers in 415 Italian, Finnish and Swedish firms. The results show that the depth of collaboration with different partners (academic/consultants, value chain partners, competitors and firms in other industries) is positively related to innovation performance, whereas the number of different partners and size have negative effects. The main result is that the knowledge content of the collaboration moderates the performance outcomes and the negative impact of having too many different kinds of partners. This illustrates how successful firms use selective collaboration strategies characterized by linking explorative and exploitative knowledge content to specific partners, to leverage the benefits and limit the costs of knowledge boundary crossing processes.