Numerical Analysis of Coaxial Double Gate Schottky Barrier Carbon Nanotube Field Effect Transistors

Carbon nanotube field-effect transistors (CNTFETs) have been studied in recent years as a potential alternative to CMOS devices, because of the capability of ballistic transport. The ambipolar behavior of Schottky barrier CNTFETs limits the performance of these devices. A double gate design is proposed to suppress this behavior. In this structure the first gate located near the source contact controls carrier injection and the second gate located near the drain contact suppresses parasitic carrier injection. To avoid the ambipolar behavior it is necessary that the voltage of the second gate is higher or at least equal to the drain voltage. The behavior of these devices has been studied by solving the coupled Schrödinger-Poisson equation system. We investigated the effect of the second gate voltage on the performance of the device and finally the advantages and disadvantages of these options are discussed.     

Failure analysis of unidirectional polymeric matrix composites with two serial pin loaded-holes

The objective of this study is to investigate the effects of geometrical and physical parameters on failure modes and failure loads in unidirectional polymeric matrix composites with two serial pin loaded holes, analytically and experimentally. It is assumed that all of unidirectional fibers in the laminate lie in one direction while loaded by a load p ₀ at infinity, parallel to the direction of the fibers. To derive equilibrium equations based on a Shear-Lag theory, a rectangular arrangement of fibers is considered and with the proper use of boundary and boundness conditions, stress and displacement fields are computed within the laminate, along with the surrounding pinholes. Finally by using the Hashin criterion failure modes and failure loads are estimated. To validate analytical results based on shear-lag theory, an experimental program is carried out. A very good agreement is observed between two procedures. Based on results, in small sizes of two pins, the dominant failure mode is bearing and with the increasing of hole sizes, failure modes are changed to tension and shear modes.     

Integrated Fuzzy DEA-ANFIS to Measure the Success Effect of Human Resource Spirituality

Workplace spirituality has gained attention as it is proven to be a contributor to organizational performance improvement. This paper aims to assess the impact of human resource spirituality on the success of organizational strategic change projects. The success of the projects is measured by the well-known criterion of deviation from the planned budget cost. Data collection is based on a questionnaire survey of 252 personnel in 36 large and medium-scale organizational change projects in power industry. The paper proposes an integrated algorithm of fuzzy data envelopment analysis (FDEA) and adaptive network-based fuzzy inference system (ANFIS) for measuring the pure effect of human resource spirituality on the success of organizational change projects in the power industry. It also achieves a verified tool capable of addressing complexity, nonlinearity, ambiguity, and fuzziness for measuring spirituality of human resources in the projects. Results show that spirituality of the project team has a significant effect on project success.     

Development of a void ratio-moisture ratio-net stress framework for the prediction of the volumetric behavior of unsaturated granular materials

Despite extensive research on the behavior of unsaturated fine-grained materials, there is still a lack of understanding of the volumetric behavior of unsaturated granular materials. In this research, a model has been developed to predict the fundamental volumetric behavior of unsaturated granular materials through loading and wetting state paths. In this regard, a loading-wetting surface was developed in a space of void ratio-moisture ratio-net stress. A distinctive feature of the proposed model is the relative simplicity in obtaining the model parameters using conventional geotechnical testing equipment. Two types of recycled granular materials, commonly applied in unbound pavements were used, namely, recycled crushed brick (CB) and excavation waste rock (WR). The uniqueness of the developed surface was evaluated by employing a number of loading and wetting state paths. The results indicate that the developed surface is unique in its loading state paths; however, it only shows uniqueness in its wetting state paths for stress levels greater than 2000 kPa. The proposed model seeks to introduce the application of the unsaturated soil mechanics theory, for predicting the behavior of granular materials in the field, by providing a practical and cost-effective methodology.     

Available and Waiting Times for Cognitive Radios

Cognitive radios (CRs) have been recently proposed for the problem of spectrum scarcity. The principle of CRs?? operation is based on the opportunistic access to the frequency spectrum mainly dedicated to primary users (PUs). The statistical time pattern of PUs?? channel usage and arrival can affect the usability of specific frequency bands for CRs. In this note, the effect of the arrival rate and channel holding time of PUs on the available times for CRs is analyzed. To this end, first, based on Poissonian arrivals, the available time for CRs is calculated. Then, assuming a gamma distribution for the inter-arrival times and a uniform distribution of channel holding time of PU in these intervals, the probability density function and moments of the available time for CRs are derived. Next, the effect of PUs statistical parameters on the average number of packets and the average symbol rate that a CR can transmit is analyzed. Also, taking that CR needs at least T seconds, the average waiting time is calculated.     

Copper Ion Recovery from Mine Water by Ion Flotation

Solutions containing copper ions are produced at copper mines due to its dissolution from ores and dumps. It is important to recover these ions to prevent this toxic element from entering the environment and because it could be economical. We investigated the use of ion flotation for extracting Cu ions from diluted mine water from the Veshnaveh Mine in Qom, Iran. Experiments were conducted using floatation cells at pH 6, 9, and 12 with diluted solutions containing 10 mg L^?1 of Cu. Sodium dodecyl sulfate and hexadecyl trimethyl ammonium bromide (HTAB) were used as collectors and methyl isobutyl carbinol (MIBC) and ethanol were used as frothers. The best result was achieved by maximizing Cu ion recovery and minimizing water recovery at pH 12, using 100 mg L^?1 of HTAB and 0.1 % (v/v) of MIBC. Copper and water recovery were 79 and 24 %, respectively.     

A quantitative approach to study solid state phase coarsening in solder alloys using combined phase-field modeling and experimental observation

In the present work, a quantitative phase-field approach is introduced to study the phase-coarsening phenomena in solder alloys, Pb-Sn alloy here. The most important part of this work is to introduce a simple and versatile approach to quantify the experimental and simulation data, without putting into difficulties corresponding to the stochastic nature of phenomenon, in order to compute unknown physical data required to perform numerical simulation. For this purpose, at first, the evolution of microstructure vs. time is studied experimentally by the conventional optical microscopy. Then, unknown physical data, the interface mobility here, is computed by fitting the time evolution of the total interface perimeter of the simulation results to that of the experimental data. In fact, by this approach, the physical data is computed such that it will be applied to predict reality in the subsequent simulations, i.e., the presented method can be accounted as the calibration of the corresponding mathematical model and numerical method. The validity of the presented approach is supported by comparing simulation data to experimental ones.     

Mechanism of Martensitic to Equiaxed Microstructure Evolution during Hot Deformation of a Near-Alpha Ti Alloy

Metallurgical and Materials Transactions A - In this study, mechanisms of microstructural evolution during hot deformation of Ti-1100 were investigated by EBSD analysis. Misorientation angle...     

Sensing and identification of carbon monoxide using carbon films fabricated by methane arc discharge decomposition technique

Carbonaceous materials have recently received attention in electronic applications and measurement systems. In this work, we demonstrate the electrical behavior of carbon films fabricated by methane arc discharge decomposition technique. The current-voltage (I-V) characteristics of carbon films are investigated in the presence and absence of gas. The experiment reveals that the current passing through the carbon films increases when the concentration of CO₂ gas is increased from 200 to 800 ppm. This phenomenon which is a result of conductance changes can be employed in sensing applications such as gas sensors.