网上查询选课系统及XML

从不同的角度来阐述新一代的Web语言－XML。     

Effect of magnesium content on the ageing behaviour of water-chilled Al-Si-Cu-Mg-Fe-Mn (380) alloy castings

A study of the effect of magnesium concentration on the ageing behaviour as measured by the hardness of 380 alloy was conducted for three levels of magnesium, namely 0.06 (base alloy), 0.33 and 0.5 wt%, for water-chilled castings (dendrite arm spacing ∼ 10–15 μm). Differential scanning calorimetry analysis of as-cast samples was carried out to determine the changes in the reactions of the phases obtained during alloy solidification, employing heating rates of 0.1 and 1.0°Cs⁻¹, up to approximately 700°C. Two heat treatments were applied to the as-cast alloys: T5 comprising ageing at 25 (room temperature), 155, 180, 200 and 220°C, for times up to 200 h, and T6 comprising solution heat treatment at 480 °C or 515°C for 8 h, followed by quenching in warm water at 60°C, followed by immediate artificial ageing at 155 or 180°C for varying times up to 100h. The results show that the higher hardness values obtained with T6 treatment can be explained by the excess precipitation of magnesium-containing phases in the as-solidified alloys. This precipitation could be eliminated under the high cooling-rate conditions prevalent in die-casting operations so that T5 treatment may be used to replace T6 treatment to produce the same hardness values. In addition, solution heat treatment in the low-temperature range (480–515°C) is adequate to produce the required changes in silicon morphology and dissolution of magnesium in the matrix. No significant difference in hardness behaviour was observed when the magnesium content was increased beyond 0.3 wt%.     

可编程光学二值双轨逻辑门

基于双轨逻辑,本文提出一种可级联的并行二值逻辑门。所有十六种二值逻辑运算可以采用偏振半波相延编程来实现。也提出了用电光晶体实现实时编程的方法。本文中给出了实验结果。     

住宅建筑结构中隔震技术的应用和经济评价

对当前隔震系统做了简单介绍 ,介绍了基础隔震的技术和施工方法等。讨论在住宅结构中推广隔震技术的方法 ,对各种类型的住宅结构做经济评价 ,讨论推广的可能性和难点。     

降低精炼钢中氢氧含量的探索

主要介绍通过优化炼钢生产工艺,使产品满足新的技术要求:S≤0.010％,P≤0.015％.[H]≤0.0002％,[O]≤0.0045％,[N]≤0.0055％。     

8098单片机在单相调压器中的应用

将8098单片机所特有的用软件来实现A/D,D/A及PWM信号输出的特性应用在模拟式移相电路中,展示了模拟式移相电路改造成具有智能化特点的一条有效途径。     

First-principles study of the tensile and fracture of the Al/TiN interface

Employing the density functional theory, we investigate the tensile and fracture processes of the Al/TiN(0 0 1) interface. The simulation presents directly the strain–stress relationship, the ideal tensile strength and the process of bond breaking of the system. Through the analysis of deformation, we find that the softer Al layers deform larger than the harder TiN layers during the tensile process. And fracture occurs between the interface and the sub-interface Al layers. In addition, the results show that during the tensile process, the ripple of the interfacial TiN layer decreases gradually with the increment of the strain. Charge transfer was detected from the Al to TiN layers near the interface area during the tensile process by means of charge density and density of states analyses. The charge transfer affects the fracture process. Compared to our previous study of the Al/TiN(1 1 1) interface, the Al/TiN(0 0 1) interface has smaller work of adhesion and larger tensile strength than the Al/TiN(1 1 1) interface. Our investigation shows that the fractures of the Al/TiN(0 0 1) and (1 1 1) interface systems both happen in the Al layers near the interface.     

A fuzzy-based impulse noise detection and cancellation for real-time processing in video receivers

In this paper, a simple fuzzy-based algorithm to remove the impulse noise from images is proposed. To achieve real-time applications, the proposed filter architecture, which combines fuzzy noise detection and noise filtering, is also designed. With low computational complexity, simulation results show that the proposed filters effectively remove the impulse noise.     

管板现场堵漏焊接中的技术要点

在对列管进行堵管时 ,如果堵头形状和加工尺寸不合理 ,焊接工艺不当 ,在焊缝处极易出现气孔、裂纹等现象 ,在仰焊时还易出现夹渣现象 ,造成新的泄漏。因此 ,管板现场堵漏时要注意以下几点 :1 )焊接材料的选择由于现场管板堵漏时列管内介质很难清除干净 ,特别是列管内存在少量水