浅析高职院校智能排课系统的设计

高校教学管理信息化是高校教育信息管理现代化的基础及关键,而其中排课工作是教学管理信息化过程中的一项重要且繁杂的基础性工作,其实质是具体的落实教学活动。本文介绍了高职院校教学管理系统的排课功能模块设计,重点论述了智能排课子系统的分析和设计,目的是为了开发出一套适合高职院校实际情况的网络教学管理系统。     

项目部合作开发报表系统

结合项目部合作开发报表生成及查询的实际需要,按照公司报表系统通用要求,全力开发易操作且高效率的报表系统。详细阐述报表系统所应用的软硬件环境、系统特点、系统操作说明及在实际工作中应用的优点综述。     

Parallel Algorithms for Image Template Matching on Hypercube SIMD Computers

This correspondence presents several parallel algorithms for image template matching on an SIMD array processor with a hypercube interconnection network. For an N by N image and an M by M window, the time complexity is reduced from O(N2M2) for the serial algorithm to O(M2/K2 + M * log2 N/K + log2 N * log2 K) for the N2K2-PE system (1 ? K ? M), or to O(N2M2/L2) for the L2-PE system (L ? N). With efficient use of the inter-PE communication network, each PE requires only a small local memory, many unnecessary data transmissions are eliminated, and the time complexity is greatly reduced.     

Improved electric insulation ability and ferromagnetic property in Nb2O5 doped BiFeO3-based multiferroic ceramics

Journal of Electroceramics - 0.675BiFeO3-0.3BaTiO3-0.025LaFeO3-x mol% Nb2O5 (x?=?0–1.25) multiferroic lead- free ceramics, fabricated by conventional solid-state reaction, were...     

挤压铸造Al-5Cu合金的组织与性能

使用挤压铸造工艺制备出一种新开发的、高强韧Al-5Cu合金,在50 MPa挤压力下铸造成型后,进行T4和T5热处理.经固溶处理后其抗拉强度达472 MPa,伸长率达10.5%.并对热处理状态下的组织和性能进行了分析研究.     

Biological analysis of woodpecker’s brain after impact experiments

Woodpeckers can withstand a fierce impact during pecking. Previous studies have focused on the biomechanical analysis of the pecking process, the properties of the beak and hyoid bone of woodpecker; however, the biological characteristics of the woodpecker brain are also important in resisting impact injuries. We employed impact experiments and biological analysis in normal and injured brains to reveal the impact-resistant biological characteristics of woodpecker brains, as well as the impact energy's biological effects on the woodpecker brain. The hoopoe, which has a similar size but only a slight pecking behavior, was selected as the control group to compare brain morphology and neuronal cells differences in normal brains between woodpecker and hoopoe by sectioning and staining. A loading device was designed to conduct a quantifiable impact energy to the woodpeckers' head. Four groups of woodpeckers were impacted with the same energy on the forehead, beak, tempus and occiput,respectively. Biological changes in the injured brains were evaluated by Nissl staining and enzyme-linked immunosorbent assay.The results showed that:(1) woodpeckers had a larger cerebellum and a higher density of Nissl bodies than hoopoe;(2) Nissl apoptosis appeared in the brain samples after the forehead and the occiput impact experiments, but no obvious Nissl body apoptosis was observed after impact on the tempus and the beak;(3) β-amyloid protein accumulated in the normal status woodpecker brain. This study reveals that: woodpecker brain morphology is well-adapted to impact, woodpecker heads display location-dependent protective performance, with beak and tempus regions having a better protective performance than the forehead and occiput, Nissl apoptosis appears in injured woodpecker brains, and that the accumulation of β-amyloid protein does not show a direct relationship with the injury state of woodpecker's brain tissue in our study.     

补料分批发酵耦合盐析萃取高效生产虫草素

为了降低液体发酵过程中高浓度虫草素积累对蛹虫草菌产生的反馈抑制,建立了补料分批发酵耦合盐析萃取系统,在发酵过程中及时移除部分虫草素,解除产物抑制,提高虫草素的终产量.为对发酵液中虫草素的进行分离,筛选出乙醇/(NH4)2 SO4及乙醇/K2 HPO4两种盐析萃取体系,当无机盐和乙醇分别为15％和27％时,虫草素回收率最高,达到98.73％和93.79％.将蛹虫草菌补料分批发酵与盐析萃取相耦合,虫草素发酵产量显著提高,在第6天进行补料,虫草素产量达793.85 mg/L,较对照组提高了25.83％,虫草素回收率达98.83％.     

多元醇稀释法制备环糊精包裹白藜芦醇的工艺研究

传统的环糊精包裹活性物的制备工艺都是以有机溶剂作为溶解活性物的载体。本研究使用化妆品中常用的多元醇代替有机溶剂,首次采用多元醇稀释法操作工艺。以白藜芦醇为活性物代表,用多元醇溶解,稳定高效地将活性物包埋于羟丙基-β-环糊精中,很好避免了有机溶剂残留的问题,并进行稳定性测试,采用光学电子显微镜观察析出物结构。采用高效液相色谱对多元醇稀释法环糊精包裹白藜芦醇水溶液中的白藜芦醇含量检测。采用红外光谱法、紫外光谱法和透射电子显微镜对其进行表征。本研究创新的多元醇稀释法工艺与传统工艺在包裹率、稳定性、溶解度等保持一致,并能成功应用于化妆品开发。     

Effect of sulfate on Cu(Ⅱ) sorption to polymer-supported nano-hydrated ferric oxides: Experimental and modeling studies

Incorporating of hydrous ferric oxide(HFO) inside porous supports with large sizes has become an effective way to decontaminate the water from heavy metals. Ubiquitous anions like sulfate are usually present in high concentrations in water, and might greatly affect adsorption behavior of hybrid HFO. Here, a polymer-based HFO-CPS was fabricated by encapsulating nano-HFO inside a chloromethylated polystyrene polymer(CPS) and the reactivity of HFO-CPS with Cu(Ⅱ) was evaluated in the presence of sulfate ions.Surface complexation theory was firstly employed to describe the effect of sulfate on Cu(Ⅱ) adsorption edges of hybrid HFO-CPS, where constant capacitance model(CCM) was adopted. The available weak adsorption site Fe_((2))OH of hybrid HFO-CPS was found to decrease from 20% Fe to 5% Fe, which might be caused by the pore plugging effect after HFO encapsulation. With the assumption that a ternary complex was formed, the effect of sulfate on Cu(Ⅱ) adsorption by HFO-CPS were successfully described by CCM using the optimized Fe_((2))OH site under different sulfate concentrations(1 or 10 mmol·L~(-1)) and Cu/Fe ratios(0.0042 or 0.0252). It is confirmed that the formation of Fe OHCu SO_4 ternary surface complexes played an important role in enhancing Cu(Ⅱ) adsorption on HFO-CPS in the presence of sulfate.     

电场耦合取能技术的仿真与试验研究

为给输电线路的监测器件提供稳定、便利的电源,基于电磁感应的原理设计了无线电容取电装置,可以最大化利用空间能量,对支撑输电线路的运行状态监测具有重要意义。首先,分析了电容取电的结构,以此得到取能装置输出功率与高压杂散电容、低压杂散电容、负载电阻等参数的计算关系,发现合理增加感应电极面积、减小感应电极电容值和增加负载电阻值可以有效提升取能装置输出功率;其次,利用多物理场仿真软件模拟了电容取电的影响因素,最后,通过Matlab软件设计了高压实验装置,对实际情况进行模拟与实验。实验结果表明,当电源电压为10 k V、耦合电容为14 p F时,1 MΩ的负载可以得到0.12 m W功率。