节理岩体的代表单元集合体模型及弹性参数预测

本文明确提出了节理岩体“代表单元集合体”的概念和模型，通过对节理岩体的“代表单元集合体”进行数值模拟，研究了节理岩体的“代表单元集合体”的变形特性，建立了节理岩体的弹性模型，提出了预测节理岩体宏观等效弹性参数的计算机模拟方法，并将其应用于岩体工程稳定性分析中。     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

熔融温度对PP中成核剂的异相成核作用的影响

用DSC研究了熔融温度对不同类型成核剂成核PP的异相成核作用的稳定性的影响。观察到随熔融温度提高，纯PP的成核作用稳定，降温结晶温度基本不变。而有机磷酸盐类成核剂成核PP的结果温度比纯PP的高，而且异相成核作用受熔融温度的影响也很小。但山梨醇类成核剂成核PP的异相成核作用随熔融温度提高，结晶温度逐步降低明显，表明其异相成核作用对热不稳定。     

软硬件协同设计语言System C在SoC设计中的应用

软硬件协同设计是未来VLSI设计的发展趋势.作为新的系统级VLSI设计标准,System C是一种通过类对象扩展的基于C/C++建模平台,支持系统级软硬件协同设计、仿真和验证.文章讨论了SystemC复杂芯片设计中的设计流程、设计优势,并给出具体设计实例.     

Electrical Resistance Measurement of Glass Transition and Crystallization Characteristics of Zr—Al—Cu—Ni Metallic Glasses

In this paper,glass transition and thermal stability of the Zr-Al-Cu-Ni metallic glasses were investigated by using electrical resistance measurement(ERM),DSC and X-ray diffraction techniques.The experimental results show that the ERM is capable of detecting the glass transition of the amorphous alloys and can help to distinguish the crystallization products of the Zr-Al-Cu-Ni metallic glasses owing to the difference of the electrical resistivity between the precipitation phases.     

Identification of extractable growth factors from small intestinal submucosa

When implanted as a biomaterial for tissue replacement, selected submucosal layers of porcine small intestine induce site-specific tissue remodeling. Small intestinal submucosa (SIS), as isolated, is primarily an acellular extracellular matrix material. In an attempt to discover the components of small intestinal submucosa which are able to induce this tissue remodeling, the material was extracted and extracts were tested for the ability to stimulate Swiss 3T3 fibroblasts to synthesize DNA and proliferate. Each of the four different extracts of small intestinal submucosa had measurable cell-stimulating activity when analyzed in both a whole cell proliferation assay (alamarBlue dye reduction) and a DNA synthesis assay ([3H]-thymidine incorporation). Proteins extracted from SIS with 2 M urea induced activity profiles in the two assays which were very similar to the activity profiles of basic fibroblast growth factor (FGF-2) in the assays. As well, the changes in cell morphology in response to the extracted proteins mimicked the changes induced by FGF-2. Neutralization experiments with specific antibodies to this growth factor confirmed the presence of FGF-2 and indicated that it was responsible for 60% of the fibroblast-stimulating activity of the urea extract of small intestinal submucosa. Western blot analysis with a monoclonal antibody specific for FGF-2 detected a reactive doublet at approximately 19 kDa and further confirmed the presence of FGF-2. Cell stimulating activity of proteins extracted from SIS with 4 M guanidine was neutralized by an antibody specific for transforming growth factor beta (TGF beta). Changes in the morphology of the fibroblasts exposed to this extract were nearly identical to changes induced by TGF beta. Although no reactive protein band was detected at 25 kDa in nonreduced western blot analysis, several bands were reactive at higher molecular weight. The identity of this TGF beta-related component of small intestinal submucosa is unknown. Identification of FGF-2 and TGF beta-related activities in SIS, two growth factors known to significantly affect critical processes of tissue development and differentiation, provides the opportunity to further elucidate the mechanisms by which this extracellular matrix biomaterial modulates wound healing and tissue remodeling.     

氮化镓低维纳米结构的制备与表征

主要是以氧化镓为原料,通过气相沉积法,制备出GaN纳米线和纳米带.通过X-射线衍射（XRD）,扫面电镜（SEM）和高分辨透射电镜（HRTEM）等测试手段对其形貌进行了表征和分析.研究了实验过程中工艺条件的改变对所制备GaN纳米结构形貌特征的影响.对两种GaN纳米材料的拉曼散射光谱进行了分析.     

关于CEA混凝土膨胀剂的若干技术问题--与游宝坤同志讨论

作者阐述了CEA膨胀剂混凝土的膨胀量较大，干缩小，抗裂性能良好的特性，CEA与粉煤灰掺用提高强度，改善界面过渡层的性质，提高耐久性；CEA混凝土无Ca（OH）2溶出问题。文中列出GBJ119应用技术规范，说明CEA可用于防水工程。     

非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经预退火后的晶化动力学的DTA研究

研究了非晶Sm5Fe74.3Nb1.5Si11.7B4.5C2.5Cu0.5合金经400℃，保温10min预退火后的晶化动力学。结果表明；该合金的晶化相为α-Fe固溶体和Sm2Fe17Cx金属间化合物，两相的晶化表观激活能分别为557KJ/mol和514KJ/mol，当晶化体积分数为60%时，α-Fe相的晶化激活能达极大值；Sm2Fe17Cx相晶化激活能则随其晶化体积分数的增加而逐渐减小。     

1100℃以上高温连铸板坯表面缺陷的模拟在线无损检测

高温状态下连铸板坯表面缺陷的在线无损检测在现代化的连铸坯热送－直轧工艺中对于保证铸坯的质量有着极其重要的意义。本文介绍了连铸坯高温探伤技术和相应的试验装置。采用涡流方法成功地模拟了１１００℃以上铸坯表面缺陷的动态检测，所用探头及检测设备均可在高温状态下长时间连续工作，能检测出深度为１．５ｍｍ，宽度为０．３ｍｍ，长为１０ｍｍ的表面缺陷，并能有效地抑制铸坯表面振动斑痕所产生的噪声影响。借助于计算机信号