Elimination of extra spring effect at the step-up anchor ofsurface-micromachined structure

This paper describes the concept, analysis, fabrication, and testing of a new anchor for surface-micromachined beams. The anchor is designed to eliminate the extra spring effect at the step-up anchor common in conventional surface-micromachined beams, so that the boundary condition follows the ideal anchoring condition more accurately. The idea is to form a reinforcement hump at the beam anchor through a minor modification in the sacrificial-layer mask. No modification in the fabrication process is necessary. Formation of the reinforcement hump is tested using the multiuser MEMS Process (MUMP) foundry service at the Microelectronics Center of North Carolina (MCNC). The effectiveness of the new anchor is analyzed by finite-element analysis based on the actual anchor geometry obtained from the fabrication directly. Experimental verification is provided by making overhanging microcantilever pairs, one with the new anchor and the other with conventional, through MUMP's and postprocessing and comparing their frequency responses. Small-signal frequency response measurements are made with a modified Michaelson interferometer. Resonant frequency of a 2-μm-thick 300-μm-long polysilicon cantilever with the new anchor differed by less than 0.1% from the ideal anchor case. In comparison, the resonant frequency of the same beam with a conventional anchor is off by over 1%     

Statistical models for prediction of arterial oxygen and carbon dioxide tensions during mechanical ventilation

The possibility of constructing statistical models for prediction of alveolar oxygen and carbon dioxide tensions has been investigated in 20 mechanically ventilated patients in acute respiratory failure (ARF). Linear multiple regression analysis using PaCO2 and PaO2 as dependent variables was used to construct (a) models for individual patients, (b) models for specific diagnostic groups and (c) general models (all patients). The coefficient of determination (R2) was highest for the individual patient models (0.38-0.99) and lowest for the general models (0.28-0.49). In order to achieve a high predictive accuracy, models matching individual patients should be constructed on the basis of initial invasive blood gas measurement. Statistically derived models may bring better understanding of the behaviour of factors influencing arterial gas tensions in ARF and may be of value in the management of patients on mechanical ventilation.     

Very high-order microring resonator filters for WDM applications

High-order microring resonators having from 1 to 11 coupled cavities are demonstrated. These filters exhibit low loss, flat tops, and out-of-band rejection ratios that can exceed 80 dB. They achieve performance that is suitable for commercial applications.     

Theoretical Modeling of Frequency-Chirped Optical Pulses in Birefringent Single-Mode Fibers

We analyze nonlinear coupling of polarized solitons in the presence of initial frequency chirp on the basis of a theoretical model described by a coupled nonlinear Schrödinger equations. We also obtain a threshold condition for the bound state of two polarizations and show analytically that the threshold amplitude for soliton trapping can be controlled by varying the chirp parameter.     

On system design

The general, multiple attribute system design problem is formulated in total quality space which includes all of the microeconomic factors that influence the net value of a product to society. A hypothetical system design task—the development of improved system specifications and new subsystem requirements for the redesign of an automobile—is used to illustrate the approach. A new format is also given for describing design of experiment arrays which facilitates their use in spreadsheet calculations.     

The changing face of emphysematous cholecystitis

Emphysematous cholecystitis is a variant of acute cholecystitis characterized by the presence of gas in the gall bladder lumen, wall or pericholecystic tissues in the absence of an abnormal communication between the biliary system and the gastrointestinal tract. In the past, the diagnosis has relied on the plain abdominal radiograph (AXR), since there are no clinical features to separate this condition from simple acute cholecystitis. The apparently high mortality and morbidity associated with emphysematous cholecystitis has previously emphasized the importance of emergency cholecystectomy. We have reviewed eight cases of emphysematous cholecystitis presenting to this hospital over the last 5 years. The diagnosis was made on AXR in only one of these cases. Ultrasound (US) scans were performed in all eight cases, of which five were positive and three negative, due to non-visualization of the gall bladder. In the three negative cases, the diagnosis was made on subsequent CT scans. On initial clinical examination, only one of the eight patients appeared systemically unwell and conservative management was employed in five of the patients. The remaining three patients underwent cholecystectomy within 3-5 days because of continuing signs or symptoms. It is concluded that the AXR is relatively insensitive in the diagnosis of emphysematous cholecystitis. As a result of the regular use of US in suspected hepatobiliary disease, emphysematous cholecystitis is being diagnosed with increased frequency, uncovering a broad spectrum of disease ranging from mild to severe. Previously, failure to separate milder cases from simple acute cholecystitis may have been responsible for reports of unremitting severity and progression requiring emergency cholecystectomy. Based on clinical assessment, conservative surgical management is possible in a significant proportion of patients.     

Types and associated type families for hardware simulation and synthesis

In this article we overview the design and implementation of the second generation of Kansas Lava. Driven by the needs and experiences of implementing telemetry decoders and other circuits, we have made a number of improvements to both the external API and the internal representations used. We have retained our dual shallow/deep representation of signals in general, but now have a number of externally visible abstractions for combinatorial and sequential circuits, and enabled signals. We introduce these abstractions, as well as our abstractions for reading and writing memory. Internally, we found the need to represent unknown values inside our circuits, so we made aggressive use of associated type families to lift our values to allow unknowns, in a principled and regular way. We discuss this design decision, how it unfortunately complicates the internals of Kansas Lava, and how we mitigate this complexity. Finally, when connecting Kansas Lava to the real world, the standardized idiom of using named input and output ports is provided by Kansas Lava using a new monad, called Fabric. We present the design of this Fabric monad, and illustrate its use in a small but complete example.     

Chemo-enzymatic synthesis of amino acid-based surfactants

The application of lipases to the synthesis of amino acid-based surfactants was investigated. Low yields (2–9%) were obtained in the acylation of free amino acids, such as l-serine and l-lysine, as well as their ethyl esters and amides with fatty acids, owing in part to low miscibility of the reactants. When the N-carbobenzyloxy (Cbz)-l-amino acids were used in an effort to improve miscibility of the amino acid derivatives with the acyl donor, a dramatic improvement was observed for N-Cbz-l-serine (92% yield) but not for N _α-Cbz- or N _ζ-Cbz-l-lysine (7 and 2% yield, respectively). As an alternative, and efficient synthesis of N _ζ-acyl-l-lysines was developed, based on the regiospecific chemical acylation of copper(II) lysinate. In pursuit of a general route to amino acid-fatty acid surfactants, the utility of a polyol linker was investigated. Thus, the glycerol ester of N _α′ N _ζ-di-Cbz-l-lysine was prepared and evaluated as a substrate for acylation. As expected, this and other glycer-1-yl esters of N-protected amino acids were excellent substrates for lipase-catalyzed acylation. Their reaction with myristic acid in the presence of Novozyme resulted in the regioselective acylation of the primary hydroxyl group of the glycerol moiety to afford the corresponding 1-O-(N-Cbz-l-aminoacyl)-3-O-myris-toylglycerols with conversions of 50–90%. These were readily deprotected to give a range of 1-O-(aminoacyl)-3-O-myristoyl-glycerols with overall yields of 27–71%.