Thermo-oxidative aging of epoxy coating systems

The thermo-oxidative behavior of unformulated (unfilled) samples of epoxy coatings has been studied at five temperatures ranging from 70 °C to 150 °C. Two epoxy networks based on diglycidyl ether of bisphenol A (DGEBA), respectively, cured by jeffamine (POPA) or polyamidoamine (PAA) were compared. Infrared spectrophotometry (IR), differential scanning (DSC) and sol–gel analysis (SGA) were used to monitor structural changes.     

Simultaneously energy production and dairy wastewater treatment using bioelectrochemical cells: In different environmental and hydrodynamic modes

A successful design, previously adapted for treatment of complex wastewaters in a microbial fuel cell (MFC), was used to fabricate two MFCs, with a few changes for cost reduction and ease of construction. Performance and electrochemical characteristics of MFCs were evaluated in different environmental conditions (in complete darkness and presence of light), and different flow patterns of batch and continuous in four hydraulic retention times from 8 to 30 h. Changes in chemical oxygen demand, and nitrate and phosphate concentrations were evaluated. In contrast to the microbial fuel cell operated in darkness (D-MFC) with a stable open circuit voltage of 700 mV, presence of light led to growth of other species, and consecutively low and unsteady open circuit voltage. Although the performance of theMFC subjected to light (L-MFC)was quite lowand unsteady in dynamic state (internal resistance = 100 Ω, power density = 5.15 W·m^-3), it reached power density of 9.2 W·m^-3 which was close to performance of D-MFC (internal resistance = 50 Ω, power density = 10.3 W·m^-3). Evaluated only for D-MFC, the coulombic efficiency observed in batch mode (30%) was quite higher than the maximum acquired in continuous mode (9.6%) even at the highest hydraulic retention time. In this study, changes in phosphate and different types of nitrogen existing in dairy wastewater were investigated for the first time. At hydraulic retention time of 8 h, the orthophosphate concentration in effluent was 84% higher compared to influent. Total nitrogen and total Kjeldahl nitrogen were reduced 70% and 99% respectively at hydraulic retention time of 30 h, while nitrate and nitrite concentrations increased. The microbial electrolysis cell (MEC), revamped from D-MFC, showed the maximum gas production of 0.2 m³ H₂·m^-3·d^-1 at 700 mV applied voltage.     

Newly designed polyacrylamide/dextran gels for electrophoresis protein separation: synthesis and characterization

Newly designed gels for electrophoresis protein separation were synthesized from acrylamide, N,N′‐methylenebis (acrylamide) and dextran mixtures. Radical polymerization was initiated by ammonium persulfate and N,N,N′,N′‐tetramethylethylenediamine. The time dependence of absorbance during polymerization was monitored using UV‐visible spectroscopy. The exothermic polymerization process exhibited a sharp rise of temperature reminiscent of the Trommsdorff effect. The swelling kinetics of the synthesized gels was examined in deionized water and buffer solutions. One of the challenges was to find an alternative to commercial products, sold as mixtures with no detailed chemical contents, commonly used in sodium dodecylsulfate polyacrylamide gel electrophoresis (SDS‐PAGE) for protein separation. For this reason, a systematic comparison was made of the properties of one of the most commonly used commercial gels, Duracryl^? from Genomics Solution Inc., and those of the synthesized polyacrylamide/dextran gels. Copyright © 2011 Society of Chemical Industry     

Investigation on the effects of microwave and conventional heating methods on the phytochemicals of pomegranate (Punica granatum L.) and black mulberry juices

Black mulberry and pomegranate juices were concentrated by conventional and microwave heating at different operational pressures (7.3, 12, 38.5, and 100 kPa). The effects of each heating method on the phytochemical changes (total anthocyanin content and antioxidant activity) of juices were investigated. The effect of various heating methods on the profile of the pomegranate anthocyanins were conducted using high-performance liquid chromatography–mass spectrometry (HPLC–MS). The main anthocyanins of pomegranate quantified by HPLC–MS were cyanidin, delphidin, pelargonidin, 3-glucoside, and 3, 5-diglucoside. In black mulberry juice, the final juice concentration of 42° Brix was achieved in 140, 120, and 95 min at 100, 38.5, and 7.3 kPa respectively and the final pomegranate juice concentration of 40° Brix was achieved in 140, 127, and 109 min at 100, 38.5, and 12 kPa respectively by using a rotary evaporator. Applying microwave energy decreased the required times to 115, 95, and 60 min for black mulberry juice and to 118, 95, and 75 min for pomegranate juice. Results showed that anthocyanin degradation and consequently decrease in antioxidant activity were more pronounced in rotary evaporation compared to microwave heating method.     

Increasing Water Security: An Algorithm to Improve Water Distribution Performance

Water Distribution Systems (WDSs) are indispensable infrastructures for urban societies. Due to vitality of continuous supply of drinking water in urban areas, it is necessary to have a performance evaluation and monitoring system to provide the expected level of security in water distribution systems. A main weakness point of these systems is the physical break of pipes which results in high level of water loss, pollution risk and public unsatisfactory. In this study, a framework is developed to increase physical water supply security in urban areas. For this purpose, a physical vulnerability index (PVI) is developed for evaluation of physical statues of water mains. In quantifying PVI, pipe characteristics and bedding soil specifications are considered. The importance of these factors on PVI is determined using Analytical Hierarchy Process (AHP). In system performance evaluation, the pipe role in system performance is incorporated regarding pipe location in WDS, distance of pipe from reservoir and average pressure of pipe. Then, System Physical Performance Index (SPVI) is evaluated. An optimization algorithm is employed to determine ways to improve the system performance through enhancing the physical condition of the pipe in the system at a minimum cost. The genetic algorithm is employed for solving the optimization model. A global sensitivity analysis method named FAST, is used for sensitivity analysis to incorporate the correlation between different parameters in analysis. The proposed framework is applied to a case study located in Tehran metropolitan area. The results of this study show the significant value of the proposed algorithm in supporting decision makers to better choose vulnerable pipes for rehabilitation practices in order to decrease system vulnerability against physical failures.     

A biotechnological perspective on the application of iron oxide nanoparticles

In recent decades,magnetic iron nanoparticles (NPs) have attracted much attention due to properties such as superparamagnetism,high surface area,large surface-to-volume ratio,and easy separation under external magnetic fields.Therefore,magnetic iron oxides have potential for use in numerous applications,including magnetic resonance imaging contrast enhancement,tissue repair,immunoassay,detoxification of biological fluids,drug delivery,hyperthermia,and cell separation.This review provides an updated and integrated focus on the fabrication and characterization of suitable magnetic iron NPs for biotechnological applications.The possible perspective and some challenges in the further development of these NPs are also discussed.     

Solving constrained optimisation problems using the improved imperialist competitive algorithm and Deb’s technique

ABSTRACT

In this paper, an improved imperialist competitive algorithm called I-ICA is proposed for solving constrained optimisation problems. In I-ICA, the use of differential evolution (DE)/rand/1 mutation operator at assimilation step enhances the population diversity. Also, the binomial crossover operator improves the speed of convergence to optimal solution by distributing good information among solutions. Furthermore, Deb’s rules were applied for handling constrains. Examinations were done on 24 well-known functions and 5 engineering design problems. The comparison of I-ICA with basic ICA and 22 state-of-the-art algorithms shows I-ICA’s superiority in terms of the rate of convergence and quality of the obtained solution.