An absolute requirement of fructose 1,6-bisphosphate for the Lactobacillus caseiL-lactate dehydrogenase activity induced by a single amino acid substitution

Lactobacillus casei allosteric L-lactate dehydrogenase (L-LDH)absolutely requires fructose 1,6-bisphosphate [Fru(1,6)P2] forits catalytic activity under neutral conditions, but exhibitsmarked catalytic activity in the absence of Fru(1,6)P₂ underacidic conditions through the homotropic activation effect ofsubstrate pyruvate. In this enzyme, a single amino acid replacement,i.e. that of His205 conserved in the Fru(1,6)P₂-binding siteof certain allosteric L-LDHs of lactic acid bacteria with Thr,did not induce a marked loss of the activation effect of Fru(1,6)P₂or divalent metal ions, which are potent activators that improvethe activation function of Fru(1,6)P₂ under neutral conditions.However, this replacement induced a great loss of the Fru(1,6)P₂-independentactivation effect of pyruvate or pyruvate analogs under acidicconditions, consequently indicating an absolute Fru(1,6)P₂ requirementfor the enzyme activity. The replacement also induced a significantreduction in the pH-dependent sensitivity of the enzyme to Fru(1,6)P₂,through a slight decrease and increase of the Fru(1,6)P₂ sensitivityunder acidic and neutral conditions, respectively, indicatingthat His205 is also largely involved in the pH-dependent sensitivityof L.casei L-LDH to Fru(1,6)P₂. The role of His205 in the allostericregulation of the enzyme is discussed on the basis of the knowncrystal structures of L-LDHs.     

Structures and electronic properties of surface/edges of nanodiamond and nanographite

The structure, electronic and magnetic properties of nanodiamond and nanographite/nanographene are investigated. Detonation nanodiamond particles that are covered with amorphous graphitic composites are hydrothermally treated to remove the graphitic surface composites and to terminate the surface carbon atoms with hydrogen. The number of localized spins of dangling bonds and the hydrogen concentration increase upon the increase in the hydrothermal treatment time up to 40 h. Above 40 h, both drop discontinuously, a surface structural reconstruction was suggested. The creation of dangling bonds and an incomplete hydrogenation of the surface carbon atoms destabilize the surface, resulting in the structural reconstruction. Nanodiamond particles are thermally converted to nanographite/nanographene. A single nanographene sheet is successfully prepared by heat-treating nanodiamond particles. The edge of graphene sheet with its edge carbon atoms being hydrogen-terminated is investigated by UHV-STM/STS. Zigzag edges are found to have non-bonding π-state of edge origin, in good agreement with theoretical prediction.     

Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method

Composite particles composed of solid powders and polymer were prepared by semichemical recycle of wasted plastics. Waste expanded polystyrene was used as raw materials of polymer matrix of composite particles. Both magnetite and silicon carbide powders were used as solid powders to give thermal and electric conductivity and magnetization, respectively. In the experiment, the oil‐phase dissolving expanded polystyrene was dispersed in fine droplets into the continuous water phase. Two kinds of powders were added at the same time or separately in the O/W dispersion. Composite particles were found to have the structure that polymer particle was covered with two kinds of solid powders. The mean diameter of composite particles and the content of each solid powder were strongly affected by the addition time when silicon carbide powder was added into the dispersion. Furthermore, it was found that the gradient adhesion layer due to two solid powders was able to be formed on the surface of polymer particle. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 483–488, 2003     

TransCAIP: A Live 3D TV System Using a Camera Array and an Integral Photography Display with Interactive Control of Viewing Parameters

The system described in this paper provides a real-time 3D visual experience by using an array of 64 video cameras and an integral photography display with 60 viewing directions. The live 3D scene in front of the camera array is reproduced by the full-color, full-parallax autostereoscopic display with interactive control of viewing parameters. The main technical challenge is fast and flexible conversion of the data from the 64 multicamera images to the integral photography format. Based on image-based rendering techniques, our conversion method first renders 60 novel images corresponding to the viewing directions of the display, and then arranges the rendered pixels to produce an integral photography image. For real-time processing on a single PC, all the conversion processes are implemented on a GPU with GPGPU techniques. The conversion method also allows a user to interactively control viewing parameters of the displayed image for reproducing the dynamic 3D scene with desirable parameters. This control is performed as a software process, without reconfiguring the hardware system, by changing the rendering parameters such as the convergence point of the rendering cameras and the interval between the viewpoints of the rendering cameras.     

Broadband Tuning of a Continuous-Wave, Doubly Resonant, Lithium Triborate Optical Parametric Oscillator from 791 to 1620 nm

We report the use of extreme broadband, high reflectivity >99.5%, optical parametric oscillator (OPO) cavity mirrors. A continuous-wave, doubly resonant, OPO demonstrated tuning over a range of 791-1620 nm with a single mirror set. Wavelength tuning was performed by temperature tuning the nonlinear material of lithium triborate. Narrow linewidth oscillation was confirmed throughout the tuning range, and threshold pump power increased gradually from 50 mW near the degeneracy to 800 mW at the tuning band edge in a double-pass pumping configuration.     

Interdiffusion in Co-Mn alloys

Interdiffusion coefficient in cobalt-manganese alloys has been determined by Matano's method in the temperature range between 1133 and 1423 K on (pure Co)-(Co-30.28 at. pct Mn alloy) and (pure Co)-(Co-51.76 at. pct Mn alloy) couples. This, ∼D, has been found to increase with the increase of manganese content. However, the activation energy (∼Q) and frequency factor ( ₀) show a maximum at about 10 at. pct Mn. The concentration dependence of and has been discussed taking into account the thermodynamic properties of the alloy. The difference in between the ferro- and paramagnetic phases in Co-5 at. pct Mn alloy has been found to be 24 kJ/mol, which is larger, than that for the diffusion of Mn⁵⁴ in this alloy. Further it has been found that the Kirkendall marker moves toward manganese-rich side, showing that manganese atoms diffuse faster than cobalt atoms. From the marker shift, the intrinsic diffusion coefficients,D _Co andD _Mn, at 33 at. pct Mn have been determined as follows:D _Co=0.22×10⁻⁴ exp(−263 kJ mol⁻¹/RT) m²/s, andD _Mn=0.98×10⁻⁴ exp(−229 kJ mol⁻¹/RT) m²/s.     

Development of a simple method for fabrication of transparent conductive films with high mechanical strength

We have developed a simple method of fabricating transparent conductive films with a high mechanical strength on glass and indium tin oxide substrates. It does not require a large excess of organic solvents and polymerization catalysts and can yield smooth films by spin-coating of a mixture of a commercially available aqueous dispersion of poly(3,4-ethylenedioxythiophene)-poly(4-styrene sulfonate) and a neat liquid of tetraethyl orthosilicate. Preparation conditions such as feed ratio, kinds of additives, and annealing temperature and time were optimized to give highly conductive, transparent and mechanically strong films.     

Electrochemically reduced Pt oxide thin film as a highly active electrocatalyst for direct ethanol alkaline fuel cell

The Pt oxide thin film and Pt thin film were prepared by reactive sputtering and the electrocatalytic activity of the ethanol oxidation reaction was investigated in a KOH solution for developing the alkaline direct ethanol fuel cells. After electrochemical reduction by passing a cathodic electric charge, the Pt oxide thin film showed 29 times larger ethanol oxidation current than the Pt thin film. This superior activity was caused by an increase in the electrochemical active surface area and the existence of residual oxygen, which was confirmed by cyclic voltammetry and XPS measurement. Due to the contribution of the residual oxygen, the rate-determining step of the ethanol oxidation reaction might change, because the Tafel slope of the Pt oxide thin film during the ethanol oxidation reaction was changed by electrochemical reduction. Despite the total Pt amount in the Pt oxide thin film being smaller than that in the Pt thin film, the Pt oxide thin film showed excellent ethanol oxidation activity. Therefore, the Pt oxide treated by electrochemical reduction may be a promising anode catalyst for the direct ethanol fuel cells.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Fabrication and characterization of polyterpenol as an insulating layer and incorporated organic field effect transistor

A non-synthetic polymer material, polyterpenol, was fabricated using a dry polymerization process namely RF plasma polymerization from an environmentally friendly monomer and its surface, optical and electrical properties investigated. Polyterpenol films were found to be transparent over the visible wavelength range, with a smooth surface with an average roughness of less than 0.4 nm and hardness of 0.4 GPa. The dielectric constant of 3.4 for polyterpenol was higher than that of the conventional polymer materials used in the organic electronic devices. The non-synthetic polymer material was then implemented as a surface modification of the gate insulator in field effect transistor (OFET) and the properties of the device were examined. In comparison to the similar device without the polymer insulating layer, the polyterpenol based OFET device showed significant improvements. The addition of the polyterpenol interlayer in the OFET shifted the threshold voltage significantly; + 20 V to −3 V. The presence of trapped charge was not observed in the polyterpenol interlayer. This assisted in the improvement of effective mobility from 0.012 to 0.021 cm²/Vs. The switching property of the polyterpenol based OFET was also improved; 10⁷ compared to 10⁴. The results showed that the non-synthetic polyterpenol polymer film is a promising candidate of insulators in electronic devices.