Der Einfluß der Gastemperatur auf den Wärmeübergang im Rohr

Ohne Zusammenfassung     

Effect of self-complementary motifs on phase compatibility and material properties in blends of supramolecular polymers

Applicability of supramolecular polymers blending in preparation of materials with tunable properties is reported. The effect of strongly dimerising 2-ureido-4[1H]-pyrimidinone (UPy) end groups on phase compatibility in binary polymer blends was studied. A low molecular weight poly(tetrahydrofuran) diol was functionalized with UPy moieties (PTHF(UPy)₂, a soft material) and mixed with varying amounts of low molecular weight UPy functionalized polycaprolactone di- and triol (PCL(UPy)₂ and PCL(UPy)₃, both relatively strong and stiff materials). Thermal studies showed that T_g of the homopolymers shifted to intermediate temperatures. AFM observation suggested that the phase domain decreased significantly after UPy functionalization of diols. Also the mechanical properties improved at a higher rate than those predicted by the rule of mixtures. These findings indicate that blend components are placed in intimate contact as a result of the UPy-UPy interactions. The reversible crosslinking by PCL(UPy)₃ gave better control still over the mechanical properties of the supramolecular polymer blends.     

Characterization of melt flow instabilities in polyethylene/carbon nanotube composites

The effect of single (SWCNT) and multi- (MWCNT) walled carbon nanotubes on the melt flow instabilities of polyethylenes with different topologies was characterized by means of a novel capillary rheometer allowing in-situ measurements of the pressure fluctuations inside the die and by scanning electron microscopy (SEM) analysis. Our results show that carbon nanotubes modify the main characteristics of the spurt instability developed by the linear polyethylene. Furthermore, the sharkskin instability, developed in short chain branched polyethylene, is reduced at low amounts of MWCNT and SWCNT. Noteworthy, the critical shear rate for the on-set of the spurt and the sharkskin instabilities decreases in the nanocomposites due to the physical interactions between the polymer and the nanofiller.At high shear rates, the gross melt fracture instability is completely erased in the nanocomposites based on the linear polymer whereas in short chain branched polyethylene the amplitude of this bulk distortion is rather moderated. These changes were confirmed by on-line pressure measurements using the novel capillary rheometer set-up. Based on our results, it is concluded that carbon nanotubes drastically affect the non-linear molecular dynamic leading to polyethylene melt flow instabilities.     

Fabrication of Sub‐10 nm Metallic Lines of Low Line‐Width Roughness by Hydrogen Reduction of Patterned Metal–Organic Materials

The fabrication of very narrow metal lines by the lift‐off technique, especially below sub‐10 nm, is challenging due to thinner resist requirements in order to achieve the lithographic resolution. At such small length scales, when the grain size becomes comparable with the line‐width, the built‐in stress in the metal film can cause a break to occur at a grain boundary. Moreover, the line‐width roughness (LWR) from the patterned resist can result in deposited metal lines with a very high LWR, leading to an adverse change in device characteristics. Here a new approach that is not based on the lift‐off technique but rather on low temperature hydrogen reduction of electron‐beam patterned metal naphthenates is demonstrated. This not only enables the fabrication of sub‐10 nm metal lines of good integrity, but also of low LWR, below the limit of 3.2 nm discussed in the International Technology Roadmap for Semiconductors. Using this method, sub‐10 nm nickel wires are obtained by reducing patterned nickel naphthenate lines in a hydrogen‐rich atmosphere at 500 °C for 1 h. The LWR (i.e., 3 σ_LWR) of these nickel nanolines was found to be 2.9 nm. The technique is general and is likely to be suitable for fabrication of nanostructures of most commonly used metals (and their alloys), such as iron, cobalt, nickel, copper, tungsten, molybdenum, and so on, from their respective metal–organic compounds.     

Probing enzyme promiscuity of SGNH hydrolases

Several hydrolases of the SGNH superfamily, including the lipase SrLip from Streptomyces rimosus (Q93MW7), the acyl-CoA thioesterase I TesA from Pseudomonas aeruginosa (Q9HZY8) and the two lipolytic enzymes EstA (from P. aeruginosa, O33407) and EstP (from Pseudomonas putida, Q88QS0), were examined for promiscuity. These enzymes were tested against four chemically different classes of a total of 34 substrates known to be hydrolysed by esterases, thioesterases, lipases, phospholipases, Tweenases and proteases. Furthermore, they were also analysed with respect to their amino acid sequences and structural homology, and their phylogenetic relationship was determined. The Pseudomonas esterases EstA and EstP each have an N-terminal domain with catalytic activity together with a C-terminal autotransporter domain, and so the hybrid enzymes EstA(N)-EstP(C) and EstP(N)-EstA(C) were constructed by swapping the corresponding N- and C-terminal domains, and their hydrolytic activities were compared. Interestingly, substrate specificity and kinetic measurements indicated a significant influence of the autotransporter domains on the catalytic activities of these enzymes in solution. TesA, EstA and EstP were shown to function as esterases with different affinities and catalytic efficacies towards p-nitrophenyl butyrate. Of all the enzymes tested, only SrLip revealed lipase, phospholipase, esterase, thioesterase and Tweenase activities.     

Italian ryegrass silage in winter feeding of organic dairy cows: forage intake, milk yield and composition

BACKGROUND: Organic milk production aims at efficient use of home‐grown feeds, especially forages, to minimise the quantity of purchased feeds. In conventional agriculture, Italian ryegrass (Lolium multiflorum Lam.) is known for its high energy content and palatability, and the aim of the present study was to examine its suitability as feed for organic dairy cows. Therefore a feeding trial was conducted comparing a diet including 50% (of silage dry matter (DM)) of Italian ryegrass silage with a control diet based on grass/clover silage (a mixture of the second cut from permanent grassland and the second cut from a perennial clovergrass ley) alone. RESULTS: Inclusion of Italian ryegrass silage in the diet increased forage intake significantly (14.5 vs 13.4 kg DM in the control group) and concentrate intake did not differ, but milk yield was slightly lower (20.3 vs 21.0 kg) owing to the low energy and protein concentration of Italian ryegrass silage. CONCLUSION: Italian ryegrass was indeed found to be highly palatable, confirming in principle its suitability as feed for organic dairy cows. However, higher energy and protein concentrations in this forage would be necessary to translate the high intakes of Italian ryegrass silage into improved milk production as well. Copyright © 2010 Society of Chemical Industry