12-tungstophosphoric and 12-tungstosilicicacid supported onto hydrous zirconia for liquid phase tert-butylation of m-cresol

Supported 12-tungstophosphoricacid (12-TPA) and 12-tunstosilicicacid (12-TSA) were used as heterogeneous catalysts for liquid-phase tert-butylation of m-cresol, an industrial important reaction. Alkylation reactions have been carried out with supported 12-TPA by varying different parameters such as % loading of 12-tungstophosphoricacid onto support, mole ratio of alcohol to m-cresol, reaction temperature, amount of the catalyst, reaction time and calcination temperature to optimize the conditions. To see the effect of the acidity on the reaction, the same reaction was studied over supported 12-TSA. Both the catalysts give 100% selectivity for o-isomer with different % conversion. The difference in catalyst performance of both the catalyst was correlated with the value of total acidity as well as Bronsted acidity.     

SOME ASPECTS OF THEORETICAL COMPARISON OF FISCHER-TROPSCH REACTORS

The reactor systems used for the Fischer-Tropsch synthesis, fixed bed, fluidized bed and slurry bed, are compared on the basis of space time yield (STY) and level of conversion obtainable under the same set of feed and operating conditions. The slurry bed and fluidized bed reactor were compared on the basis of a first order reaction model. The performance of these two reactors was found to be comparable at low values of WHSV, but at higher values of WHSV, the fluidized bed reactor gave higher conversions and STY. A power law kinetic expression was used to compare the performance of the slurry bed and fixed bed reactors. Higher conversions and STY were obtained from the fixed bed with varying WHSV. This may be due to the omission of the intra and inter phase mass transfer resistances in the modelling of the fixed bed reactor.     

Novel Gas-Liquid-Solid Reactors

Multiphase reactors involving gas, liquid, and solid phases have several important applications in the chemical industry, particularly in catalytic processes. Some of the well-known examples are: hydrogenation and oxidation of organic compounds, hydro-processing coal-derived and petroleum oils, Fischer-Tropsch synthesis, and methanation reactions. Due to the presence of three phases, the problem of reactor design is often important to achieve effective mass and heat transfer as well as a mixing pattern favorable to the particular process. The reactors are mainly of two types: (a) solid catalyst is suspended either by mechanical agitation or gas-induced agitation and (b) solid catalyst is in a fixed bed with concurrent or countercurrent feed of gas and liquid re-actants. The reactor types conventionally used in industry are: (a) mechanically agitated or bubble column slurry reactors and (b) trickle-bed or packed-bed bubble reactor. The various design and modeling aspects of these reactors have been reviewed by Satterfield [1], Chaudhari and Ramachandran [2], Shah [3,4], Ramachandran and Chaudhari [5], Shah et al. [6], and Herskowitz and Smith [7]. In several industrial processes these reactor designs are modified to achieve a certain specific objective, such as better heat or mass transfer, higher catalyst efficiency, better reactor performance and selectivity, etc. Similarly, specially designed reactors are often used for laboratory kinetic studies or to understand a certain phenomenon. Thus, novel multiphase reactors are becoming important from both academic and industrial viewpoints. Some of the recently introduced novel gas-liquid-solid reactor types are: (a) loop recycle slurry reactors, (b) basket-type reactors, (c) ebullated-bed reactors, (d) internal or external recycle reactors, (e) multistage slurry or packed-bed reactors, (f) column reactors with sieve trays or multiple agitators, (g) gas-induced agitated reactors, and (h) horizontal-packed-bed reactors. are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed. These novel reactor designs are being used in several new commercial processes, and various design aspects, such as hydrodynamics and mass and heat transfer, have been the subject of investigations in the last few years. However, no attempt to review the scattered information on these novel gas-liquid-solid reactors has been made. Therefore, the main objective of this paper is to review important developments in novel gas-liquid-solid reactors. For each type of reactor, advantages, disadvantages, and applications are discussed. Further, the status of information on hydrodynamics and mass transfer parameters and scale-up considerations is reviewed.     

一种蜂窝式企业知识管理体系构建方法

旨在探讨一种新的企业知识管理体系结构及其构建方法.分析现有企业知识管理体系存在的问题,研究个人知识管理体系的结构特点及其优点,并结合蜂窝状组织结构方式,提出一种基于个人知识管理构建企业级知识管理体系的方法,并阐述其原理、特点及其构建方法.与现有企业知识管理体系相比,这种新方法使得知识的更新更加快速,系统维护更方便,具有更简便、灵活、高效的特点.     

3D Simulation Research on Urea-SCR DeNO<em>x Catalyst for Diesel Engine

In order to reduce oxides of nitrogen (NOx) emanated from a diesel eng ine, a comprehensive urea selective catalyst reduction (SCR) DeNOx catalys t was modeled in which numerical simulations were used as a complementary tool f or the experimental investigations to make the design decisions, and hence short en the development process. In this approach, relevant conversion reactions were studied in 1D model, and the parameters obtained in this way were transferred t o 3D simulations. According to the results ...     

Hydrodynamics and mass transfer in a bubble column with an organic liquid

Hydrodynamic and mass transfer data in Soltrol-130 (a mixture of C₉+ iso-paraffins) were measured in a 0.305 m diameter bubble column. The gas holdup structure (i.e., the contributions to holdup from the small and large bubble fractions of the dispersion) for this hydrocarbon liquid in the churn turbulent flow regime was analyzed using the dynamic gas disengagement technique. The validity of the assumption of axially uniform gas holdup structure was checked. Literature correlations were found inadequate to explain the observed gas holdup and the volumetric mass transfer coefficients for Soltrol-130. The volumetric mass transfer coefficient per unit volume of large bubbles is shown to be independent of superficial gas velocity for the fully developed churn turbulent regime. The present hydrodynamic and mass transfer data in the churn turbulent regime should be useful in the design and scale-up of bubble columns used in organic process industries.     

Moisture absorption by cyanate ester modified epoxy resin matrices. Part I. Effect of spiking parameters

The moisture absorption of cyanate ester modified epoxy resin matrices has been studied under thermal spiking conditions. Enhanced moisture absorption has been observed at spike-temperatures above 120 °C. The results of the desorption studies on both control specimens and the spiked specimens showed that some of the water molecules remained entrained in the polymer. It is postulated that this water could be associated with that which is hydrogen bonded or from the hydrolysis of isolated residual cyanate ester groups because the concentration of entrained water remains constant at spike-temperatures below 180 °C. Above 180 °C a thermally activated process, leading to chain scission as indicated by a reduced recoverability of the glass transition temperature (T_g) on drying.On isothermal resorption, the moisture concentration was found to be similar to that achieved through thermal spiking, showing that the entrained water at the lower spike-temperatures can also be achieved under mild conditions. The T_g is reversibly recovered to within 5 °C, which indicates a degree of relaxation rather than degradation. The moisture diffusion coefficient estimated from the resorption curves is lower than those estimated from the absorption and desorption curves. The isothermal resorption diffusion coefficient also decreased with increasing spike temperature. It is proposed that thermal spiking induced a relaxation of the network but as the spike-temperature approaches the transition region of the wet polymer, further hydrolytically induced relaxation events become feasible.     

Estimation of the Kubelka—Munk scattering coefficient from single particle scattering parameters

Computer colour matching of paints is based on the determination of the Kubelka—Munk absorption (K) and scattering coefficients (S) of pigments. K and S are sensitive to particle size in the range of sizes employed in paint technology. The K—M theory does not provide any guidelines for the correction of the values of K and S with a change in particle size. On the other hand the Mie theory linear scattering coefficient can be calculated from a knowledge of size and refractive index of the pigment. A number of relations correlating the K—M scattering coefficient and the linear scattering coefficient have been proposed in the literature. Attempts are made to estimate the K—M scattering coefficient using a relation suggested by Mudgett and Richards and to make a comparison with experimental values. The Mie theory equations being complex, simplified equations applicable to pigment sizes for the calculation of Mie theory parameters are proposed. The viability of the simplified equations has been established by comparing the results with those obtained using the full Mie equations.The K—M scattering coefficient for titanium dioxide pigments has been determined from reflectance measurements. The particle size of titanium dioxide has been determined by a light scattering method. The K—M scattering coefficient calculated from the linear scattering coefficient obtained using the simplified expressions agrees with experimental results. This suggests a method for the correction of the values of K and S with changes in pigment particle size.     

Criteria for axial dispersion effects in adiabatic trickle bed hydroprocessing reactors

This paper first outlines an approximate solution to the governing equations for an adiabatic hydroprocessing trickle bed reactor operating in the presence of axial dispersion. The approximate solution agrees very well with the rigorous numerical solution for Peclet numbers greater than approximately three.Using the approximate solution, criteria for significant axial dispersion effect are obtained. These criteria indicate that at high conversions, an adiabatic operation produces a larger axial dispersion effect than the isothermal operation. At low conversions, opposite results are obtained.The derived criteria are used to evaluate the orders of magnitude of Peclet number required to avoid axial dispersion effect in pilot scale adiabatic reactors for (a) residual hydrodesulfurization (b) hydrocracking of gas oils and (c) denitrogenation of shale oils. The calculations indicate that the axial dispersion effect is of less importance in case (c) than in cases (a) and (b).Finally, the role of heat effects on the axial dispersion in a vapor phase fixed bed adiabatic reactor is evaluated.     

DPV: a taxonomy for utilizing deep learning as a prediction technique for various types of cancers detection

Multimedia Tools and Applications - Deep learning (DL) is a type of machine learning capable of processing large quantities of data to provide analytic results based on a particular...