高速切削机床中的磁轴承

高效化是机械制造的永恒主题之一。本文简介了高速切削的理论依据及其优点，分析了磁悬浮轴承的原理、特点以及磁浮轴承在高速切削机床上的应用情况，从而说明了磁浮轴是高速切削机床最理想的轴承之一。     

Thermodynamic assessment of the Fe-U binary system

The Fe-U system is one of the binaries of the U-Fe-Zr-O quaternary system that is important for a safe nuclear program. A new thermodynamic assessment of Fe-U is presented, taking into account some recent thermodynamic measurements: enthalpy of formation and of melting as well as heat capacities for both intermetallic compounds Fe₂U and FeU₆. The calculated phase diagram and thermodynamic data generally agree very well with the experimental values. The calculated temperature of the peritectic transformation [FeU₆ ↔ liquid + bcc-U] is equal to 1104 K, which is higher than in the previous assessments, but in agreement with Labroche’s value. However, the experimental melting enthalpy of FeU₆ is not reproduced by the present set of thermodynamic parameters.     

The Structure Stability of Carbide-Free Bainite Wheel Steel

Metallographic structures of carbide-free bainite steel wheel rim are mainly composed of supersaturated lath ferrite and retained austenite film among bainitic ferrite laths. It is suspected that supersaturated ferrite and retained austenite are likely to decompose under the influence of temperature change and mechanical stress. Stability of wheel rim structure is studied by means of x-ray diffraction, dye microscopy, and micro-hardness test. When the samples are tempered in the range of 150-350 °C, the retained austenite films are at the state of relative stability. Fifty percent of retained austenite is decomposed when the sample is tempered at 400 °C. Microhardness increases when the sample is tempered at 150 °C. The decrease in hardness is mild when the samples are tempered from 200 to 500 °C. The mechanical stability of retained austenite film is studied with tensile sample under the effect of tensile stress. The retained austenite appears to be stable in low and middle degree of deformation, and decomposition occurs at great amount of deformation. Diffraction peak of carbide is not found in all above experiments. The steel enriched silicon prevents the carbide precipitation during the transformation. It indicates the carbide-free bainite wheel steels have an excellent thermal and mechanical stability.     

邻氨基苯磺酸生产装置技术改造

通过改进生产工艺与设备,提高了装置生产能力和产品质量指标,达到了降本增效的目的。     

Microstructure and morphology of amine-cured epoxy coatings before and after outdoor exposures—An AFM study

Atomic force microscopy (AFM) has been used to study the morphology and microstructure of an amine-cured epoxy before and after outdoor exposure. Measurements were made from samples prepared in an essentially CO₂-free, H₂O-free glove box and from samples prepared in ambient conditions. For those prepared in a CO₂-free glove box, AFM imaging was conducted on (1) an unexposed air/coating surface, (2) an unexposed coating bulk, (3) an unexposed coating/substrate interface, and (4) a field exposed air/coating surface. For samples prepared in ambient conditions, only the unexposed air/coating surface was investigated. The same regions of the exposed samples were scanned periodically by the AFM to monitor changes in the surface morphology of the coating as UV exposure progressed. Small angle neutron scattering and Fourier transform infrared spectroscopy (FTIR) studies were performed to verify the microstructure and to follow chemical changes during outdoor exposure, respectively. The results have shown that amine blushing, which occurs only under ambient conditions, had a significant effect on the surface morphology and microstructure of the epoxy. The surface morphology of the samples prepared under CO₂-free, dry conditions was generally smooth and homogeneous. However, the interface and the bulk samples clearly revealed a two-phase structure consisting of bright nodular domains and dark interstitial regions, indicating an inhomogeneous microstructure. Such heterogeneous structure of the bulk was in good agreement with results obtained by small angle neutron scattering of unexposed samples and by AFM phase imaging of the degraded sample surface. The relationship between submicrometer physical changes and molecular chemical degradation is discussed. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004, in Chicago, IL.     

氯丁橡胶胶粘剂

1低温聚合、快速结晶型氯了用胶氯丁橡胶的结晶度与反式1，4含量有关，而反式1，4含量又是由乳液聚合温度决定的，聚合温度越低，反式1，4含量越高。为了得到快速结晶型氯丁橡胶，聚合必须在较低温度下进行，一般不高于15℃。快速结晶型氯丁橡胶广泛用于鞋底的粘接、层压板的粘合、汽车装饰，以及其它多种用途。主要从引发剂、调节剂等几个方面改进氯丁橡胶的性能：2＠基氯T橡胶。驻基氯丁胶是氯丁二烯和甲基丙烯酸的共聚物，是非结晶性，适用于室温硫化和耐热性用途。与快结晶型氯丁橡胶相比，由其配制的胶粘剂粘结强度形成更快，耐热性增…     

大颗粒煤燃烧传递动力学破碎理论模型

研究了大颗粒煤燃烧中的颗粒破碎现象，理论分析了大颗粒煤的着火过程和颗粒破碎过程，建立了大颗粒煤燃烧传递动力学破碎模型，对褐煤、烟煤和无烟煤三个典型煤种进行了燃烧初期数值模拟，指出了大颗粒煤燃烧时着火和颗粒破碎的内在联系。     

从煤炭、天然气制取石油石化产品工艺技术

在阐述煤炭、天然气通过吹氧气化制取CO +H2 合成气联产石油石化产品的基础上 ,详细介绍了甲醇、二甲醚、乙烯生产工艺技术的应用与开发 ,对各种工艺路线进行了论证和技术经济评估     

Langmuir吸附方程的应用

本文总结了Langmuir方程在吸附分离过程中的应用。利用Langmuir方程得到直观表达混合气组分气体间吸附强弱关系及分离的难易程度的x-y图，推导了Lewis关系式。     

TPR处理剂的研究

利用活性单体苯乙烯与氯丁橡胶、高苯乙烯热塑弹性体接枝聚合，所得产物稀释后用于ＴＰＲ（ＴｈｅｒｍａｌＰｌａｓｔｉｃＲｕｂｂｅｒ）粘接前的预处理，可明显提高剥离强度。