浅析硫磺回收装置中的自动控制设计

大规模高含硫原油的炼制工艺必须配套设置脱硫和硫磺回收装置。笔者针对硫磺回收装置的特点,为确保装置的安全平稳运行,提出了该装置自动控制设计中需要严格监控的工艺参数及重点部位,叙述了仪表选型原则和精确测量与控制的原理和方法。     

Accurate higher-order analytical approximate solutions to nonconservative nonlinear oscillators and application to van der Pol damped oscillators

In general, this paper deals with general nonlinear oscillations of a nonconservative and single degree-of-freedom system with odd nonlinearity and, in particular, it presents accurate higher-order analytical approximate solutions to van der Pol damped nonlinear oscillators having odd nonlinearity and the Rayleigh equation. By combining the linearization of the governing equation with harmonic balancing and the method of averaging, we establish accurate analytical approximate solutions for the general weakly damped nonlinear systems. Unlike the classical harmonic balance method, simple linear algebraic equations instead of nonlinear algebraic equations are obtained upon linearization prior to harmonic balancing. The combination of these two methods results in very accurate transient response of the periodic solution. In addition and for the first time, this paper also presents a method for deducing fourth-, fifth- and higher-order linearized governing equations from the lower-order equations without the requirement of formulating the problem from the first principle. Three examples including the van der Pol damped nonlinear oscillator are presented to illustrate the excellent agreement with approximate solution using the exact frequency.     

The effect of ionic interaction on the miscibility and crystallization behaviors of poly(ethylene glycol)/poly(L‐lactic acid) blends

The effect of end groups (2NH₂) of poly(ethylene glycol) (PEG) on the miscibility and crystallization behaviors of binary crystalline blends of PEG/poly(L ‐lactic acid) (PLLA) were investigated. The results of conductivity meter and dielectric analyzer (DEA) implied the existence of ions, which could be explained by the amine groups of PEG gaining the protons from the carboxylic acid groups of PLLA. The miscibility of PEG(2NH₂)/PLLA blends was the best because of the ionic interaction as compared with PEG(2OH, 1OH‐1CH₃, and 2CH₃)/PLLA blends. Since the ionic interaction formed only at the chain ends of PEG(2NH₂) and PLLA, unlike hydrogen bonds forming at various sites along the chains in the other PEG/PLLA blend systems, the folding of PLLA blended with PEG(2NH₂) was affected in a different manner. Thus the fold surface free energy played an important role on the crystallization rate of PLLA for the PEG(2NH₂)/PLLA blend system. PLLA had the least fold surface free energy and the fast crystallization rate in the PEG(2NH₂)/PLLA blend system, among all the PEG/PLLA systems studied. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

宝钢曲轴用非调质钢的生产与展望

在实验室研究的基础上，开发了屈服强度为520MPa级的曲轴用微合金化非调质钢48MnV。工业生产了6000余吨φ151mm大规格圆钢，其各项性能满足了用户要求。指出了宝钢曲轴用非调质钢开发和努力的方向。     

Nonlinear Thermal Analysis for Qing-Tibet Railway Embankments in Cold Regions

Heat convection in ballast mass in railway embankments is a problem of heat convection in porous media. In order to calculate the temperature distribution of the Qing-Tibet railway embankment from the governing equations used to study forced convection for incompressible fluids porous media, detailed finite-element formulas for heat convection in porous media are derived using Galerkin’s method. The temperature distributions on central lines of the traditional railway embankment, the ripped-rock embankment, and the ripped-rock revetment embankment that were constructed on July 15, 2002 have been analyzed and compared on July 15, October 15 in the 24th year after construction, and January 15 in the 25th year after construction under the climatic and geological conditions on the Qing-Tibet Railway. The calculated results indicate that the traditional railway embankment will raise the permafrost temperature under the embankment base and make the permafrost embankment thermally unstable. The ripped-rock embankment and the ripped-rock revetment embankment will reduce the permafrost temperature under the embankment base in cold regions, therefore maintaining the thermal stability of permafrost. However, the ripped-rock embankment needs more rock mass while the ripped-rock revetment embankment need less rock mass, and its construction cost is lower than that of the former. Therefore, it is highly recommended that the ripped-rock revetment embankment be used for the Qing-Tibet railway embankment structure in high temperature permafrost regions so that the permafrost embankment can be protected as much as possible.     

Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom

The aim of this study is to investigate means of efficiently assessing the effects of distributed structural modification on the dynamic properties of a complex structure. The dynamic properties of the modified structure can be determined by experimental testing or numerical simulation, both of which are complex, expensive and time-consuming. Assuming that the original dynamic characteristics are already established and that the modification is a relatively simple attachment, the modified dynamic properties may be determined numerically without solving the equations of motion of the full-modified structure. The frequency response functions (FRFs) of the modified structure can be computed by coupling the original FRFs and a delta dynamic stiffness matrix for the modification introduced. The validity of this approach is investigated by applying it to a cantilever beam to which a smaller beam is attached as modification. The original FRFs were obtained experimentally as well as numerically. The delta dynamic stiffness matrix was determined numerically by modeling the attachment and part of the original structure including the attachment points. The FRFs of the modified beam were then computed. Good agreement is obtained by comparing the results to the FRFs of the modified beam determined experimentally as well as by numerical modeling of the complete modified structure.     

Cross-Border Migration of Hong Kong Residents Under the 'One Country, Two Systems' Policy

Hong Kong is known as a migrant city because its population was sourced from mainland China, and because there has always been outflows of people to overseas countries, especially from the mid-1980s to mid-1990s. Emigration to mainland China has become a significant recent trend. This article discusses this phenomenon in the theoretical contexts of migration and trans-border residential development. It contends that the trend will intensify more quickly than other cross-border movements because the two systems are separated by a political border within one country, and because there are common cultural ties and rapid economic integration.     

高速转镜相机中倾斜光束的成象

本文通过建立几何模型 ,讨论了高速转镜相机光束倾斜入口的成象原理。证实了倾斜光束入口在转镜旋转时成象点的扫描轨迹是在以入射点为顶点 ,以成象点和入射点的连线为母线扫出的正圆锥底面的平面内 ,从而把空间光学的复杂设计问题简化成平面上的设计。此原理已用于 PDF- 2 0 0型平面转镜等待式分幅相机的设计