Preparation and characterization of novel semi‐interpenetrating 2‐hydroxyethyl methacrylate‐g‐chitosan copolymeric microspheres for sustained release of indomethacin

A novel semi‐interpenetrating (semi‐IPN) graft copolymer of 2‐hydroxyethyl methacrylate (HEMA) with chitosan (CS) has been prepared in the form of microspheres, using water‐in‐oil (W/O) emulsion technique. Microspheres were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and X‐ray diffractometry (X‐RD) to confirm the crosslinking and polymorphism of indomethacin (IDM). The X‐RD and DSC techniques indicated a molecular‐level dispersion of IDM in the IPN matrix. Scanning electron micrographs (SEM) taken at the cross section of the microspheres have shown rough surfaces around the microspheres. The sustained release characteristics of the matrices for IDM, an anti‐inflammatory drug, were investigated in pH 7.4 media. Particle size and size distribution of the microspheres were studied by laser light diffraction particle size analyzer. The drug was released in a sustained manner for up to 12 h. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Biodiesel development from high acid value polanga seed oil and performance evaluation in a CI engine

Non-edible filtered high viscous (72 cSt at 40 °C) and high acid value (44 mg KOH/gm) polanga (Calophyllum inophyllum L.) oil based mono esters (biodiesel) produced by triple stage transesterification process and blended with high speed diesel (HSD) were tested for their use as a substitute fuel of diesel in a single cylinder diesel engine. HSD and polanga oil methyl ester (POME) fuel blends (20%, 40%, 60%, 80%, and 100%) were used for conducting the short-term engine performance tests at varying loads (0%, 20%, 40%, 60%, 80%, and 100%). Tests were carried out over entire range of engine operation at varying conditions of speed and load. The brake specific fuel consumption (BSFC) and brake thermal efficiency (BTE) were calculated from the recorded data. The engine performance parameters such as fuel consumption, thermal efficiency, exhaust gas temperature and exhaust emissions (CO, CO₂, HC, NO_x, and O₂) were recorded. The optimum engine operating condition based on lower brake specific fuel consumption and higher brake thermal efficiency was observed at 100% load for neat biodiesel. From emission point of view the neat POME was found to be the best fuel as it showed lesser exhaust emission as compared to HSD.     

Evolution of Surface Morphology in Laser-Dressed Alumina Grinding Wheel Material

An approach to laser dressing of alumina grinding wheels is proposed based on solidification microstructures associated with rapid cooling rates obtained in laser surface processing. Laser dressing of alumina grinding wheels forms surface microstructures characterized by multifaceted grains that are expected to facilitate the micro-scale material removal during precision machining. A detailed investigation of variation of grain size and melt depth with laser fluence is conducted. The results are correlated with calculated cooling rates derived from a thermal model. In addition, based on microscopic observations, the formation of surface grains by stacking of individual multifaceted grains formed during laser dressing is suggested.     

Durability of glass‐fiber‐reinforced polymer nanocomposites in an alkaline environment

This study was conducted to determine the effect of clay content in GFRP (glass‐fiber‐reinforced polymer) composite samples as they were aged in an alkaline solution. Two kinds of GFRP composite samples were prepared. One was E‐glass‐fiber‐reinforced vinyl ester polymer, and the other was nano‐GFRP composites prepared with the addition of 1 and 2 wt% of montmorillonite clay to the polymer matrix. These samples were aged in alkaline solution of pH 13.2 with and without sustained load. The load was 1335 N or 18.7% of the tensile strength of the composite samples. The aging was evaluated by measuring the reduction in tensile strength after 6 months. Also, absorption of alkaline solution into the plain and nano‐GFRP samples was investigated so as to elucidate the diffusion behaviors. It was found that for a short exposure time (e.g. 1 month) and without sustained load, dispersing 2 wt% of the nanoclay in the polymer matrix of the GFRP samples reduces the diffusivity by 39%. However, with the application of sustained load, the glass fiber composite samples deteriorate more with increasing clay content. The reduction in tensile strength was 7.1%, 12.1%, and 18.1% for the samples containing 0, 1, and 2 wt% of clay, respectively. J. VINYL. ADDIT. TECHNOL., 12:25–32, 2006. © 2006 Society of Plastics Engineers     

Computer aided decision support system for mitral valve diagnosis and classification using depthwise separable convolution neural network

Multimedia Tools and Applications - The significance of mitral valve (MV) treatment is increasing recently because of an aging population. The computer vision-based acquisition and quantification...     

Spatio‐temporal trends of nutrients and physico‐chemical parameters on lake ecosystem and fisheries prior to onset of cage farming and re‐opening of the Mbita passage in the Nyanza Gulf of Lake Victoria

Many large lake ecosystems are experiencing increasing eutrophication and persistent cyanobacteria‐dominated algal blooms affecting their water quality and ecosystem productivity because of widespread non‐point and point nutrient sources. Accordingly, the present study utilized data of July 2003 and January–February 2004, as well as previous measurements of nutrients and physico‐chemical variables (electrical conductivity, dissolved oxygen, temperature, pH, turbidity and chlorophyll‐a), to characterize the spatial and temporal trends, as a means of better understanding the factors influencing lake environmental conditions, as support tools for long‐term ecosystem management and for better understanding the long‐term trends and effects. Inshore gulf areas were found to represent zones of maximum nutrient concentrations, compared to the deep main lake zones, with significant inter‐parameter correlations. Phosphorus, silicon and chlorophyll‐a concentrations were significantly correlated. Water electrical conductivity was also significantly and positively correlated with soluble reactive silicon (SRSi), alkalinity hardness DO, while exhibiting a negative association with water transparency. Water turbidity and transparency, electrical conductivity, and SRSi concentrations clearly describe a gradient from the gulf into the main lake. For such a shallow gulf, these findings suggest primary productivity is influenced mainly by the availability of nutrients, light transparency and the extent of availability of resuspended nutrients. The increasing eutrophic state of Lake Victoria is a serious concern since it contributes to an increased potential of more frequent occurrences of cyanobacterial blooms, a potential public health risk to both humans and wildlife. Improved understanding of influences from previous fish species introductions and concomitant changes in indigenous fish species, increased lake basin population and anthropogenic activities, water hyacinth resurgences, sustainability of biodiversity, and current interests in cage farming, are among the major concerns and challenges facing the contemporary Lake Victoria. The trends regarding nutrients and physico‐chemical characteristics are intended to support better monitoring efforts and data to promote the lake's ecosystem services and the sustainable management of the lake ecosystem.     

Chemically functionalized carbon nanotubes and their characterization using thermogravimetric analysis, fourier transform infrared, and raman spectroscopy

This article reports key findings on the chemical functionalization of carbon nanotubes (CNT). The functionalization of chemical vapor-deposited CNT was carried out by treating tubes with polyvinyl alcohol through ultrasonication in water with the aid of a surfactant. The surfactant is expected to promote the unbundling of aggregated CNT. The characterization of functionalized samples using thermogravimetric analysis, Fourier transform infrared spectroscopy, and Raman spectroscopy revealed that the CNT were functionalized by the interaction of carboxylic acid and hydroxyl groups. From the characterization studies, it is apparent that there is a strong interaction between these functional groups and the covalently bonded carbon in the CNT network. The functionalization process enabled good CNT dispersion in the solution, and the CNT remained in suspension for many days. To support the effective functionalization of the tubes, the interaction of functionalized CNT with Ni ions is also demonstrated. This paper was presented at the fourth International Surface Engineering Congress and Exposition held August 1–3, 2005 in St. Paul, MN.     

Solving a real-time allocation problem with constraint programming

In this paper, we present an original approach (CPRTA for “Constraint Programming for solving Real-Time Allocation”) based on constraint programming to solve a static allocation problem of hard real-time tasks. This problem consists in assigning periodic tasks to distributed processors in the context of fixed priority preemptive scheduling. CPRTA is built on dynamic constraint programming together with a learning method to find a feasible processor allocation under constraints. Two efficient new approaches are proposed and validated with experimental results. Moreover, CPRTA exhibits very interesting properties. It is complete (if a problem has no solution, the algorithm is able to prove it); it is non-parametric (it does not require specific tuning) thus allowing a large diversity of models to be easily considered. Finally, thanks to its capacity to explain failures, it offers attractive perspectives for guiding the architectural design process.