延缓与加速A1-Cu合金时效析出反应的研究

研究了溶质原子浓度、Si晶体第二相、残余形变、外加莫来石(Mullite)短纤维及其交互作用，对二元Al—Cu合金时效析出行为的影响。试验材料采用挤压铸造方法制备，复合材料中纤维体积分数为18％。实验结果表明：随溶质原子浓度的升高，A1-Cu二元合金中GP，θ″和θ′相的析出都得到了相应加快；Si含量超过一定值后，随Si含量增加，A1-Cu-Si合金中GP区形成受到抑制，而θ″和θ′相的析出得到加快；形变对GP区的抑制和对θ″，θ′和θ相的加速析出具有十分明显的作用；纤维本身除对GP区抑制和对θ″，θ′相的析出加速外，还会与溶质原子、合金元素或第二相以及残余形变交互作用，使GP区被抑制，而θ″，θ′甚至θ相被加速析出等现象进一步加强。用位错理论能较好地解释析出反应延缓与加速的微观机理。     

水下隧道穿越管道保护效果测试评价

本文通过对四川气田北干线涪江隧道穿越管道阴极保护电参数的现场测试，取得了实际可信的基础数据，验证了处于水下隧道洞内的穿越段管道，能得到陆上强制电流阴极保护系统的有效保护，保护电流所必经的岩石层和锚喷钢筋混凝土层对保护电流没有构成屏蔽的结论，对管道工程设计和运行管理具有指导作用。     

感应加热钢包炉的电磁与结构分析

通过电磁场数值计算，对国外感应加热钢包炉的电磁设计及包壳结构进行分析，为国内开发、应用和优化感应加热钢包炉提供基础。     

乳液聚合中乳化剂对聚合物乳液稳定性的影响

简要叙述了聚合物乳液稳定性的测定方法，详细地讨论了乳化剂的类型、用量及加入方式等对丙烯酸酯类聚合物乳液的化学稳定性、机械稳定性及贮存稳定性的影响。     

Aromatic products of 340 °C supercritical-toluene extraction of two Turkish lignites: an n.m.r. study

Fractions of Elbistan and Seyitomer (Turkish) lignites, extracted with supercritical toluene at 340 °C and 8 MPa, have been separated by solvent extraction and silica-gel chromatography. Analyses by n.m.r. and i.r. spectroscopies and other methods have been combined in structural-analysis schemes to yield information about the average molecule in aromatic extracts. Carbon aromaticities, f_a, derived from 22.63 MHz ¹H-decoupled pulse Fourier-transform (PFT) ¹³C-n.m.r. are more widely spread for Elbistan (0.34–0.56) than for Seyitomer (0.40–0.43), and are lower than for supercritical-gas (SCG) products from bituminous coals. ¹³C-n.m.r. also reveals the presence of aromatic ether-O in polar fractions. Narrow aromatic signals in 100 MHz ¹H-n.m.r. spectra suggest the presence of single-aromatic-ring average structures. In the hexane-soluble aromatics, 27% (Elbistan) and 29% (Seyitomer) of the available sites are substituted by alkyI groups, some of which are at least eight carbon atoms long; the hexane-soluble polar and asphaltene/asphaltol fractions contain fewer such groups.     

A new LCL-lens array with electrodes of interlaced structure to be applied for auto-stereoscopic 3D displays

A new design of the liquid crystal lenticular (LCL) lens array with interlaced electrodes is proposed to realize an auto-stereoscopic 3D display. The structure of interlaced electrodes aims to generate a desired non-uniform electric filed to improve the focusing ability of the LCL-lens array with lower voltage drives. This paper is organized as first to describe the design criteria of a lenticular lens sheet for wide extended graphics array LCD panel. Based on the designed lenticular lens array, an LCL-lens array with proposed interlaced electrodes is next designed. The fabrication and the detailed structure are given. A series of experiments are then conducted and successfully verify the focusing capability and desired 3D display functions, that is, to separate two images to right and left eyes. Also, the developed auto-stereoscopic 3D display is able to adapt to varied viewer locations with favorable imaging quality.     

十四醇聚氧化烯烃醚琥珀酸单酯磺酸盐的表面活性研究

合成了一系列十四醇聚氧乙烯醚和聚氧丙烯醚琥珀酸单酯磺酸盐，比较了其临界胶束浓度、润湿力、起泡力等表面活性     

单组分阴离子水性聚氨酯胶膜的热质研究

应用热质分析（TG）研究了单组分阴离子水性聚氨酯胶膜的耐热性能，结果表明：n（--NCO）：n（--OH）增大，胶膜的耐热性能增强；聚酯相对分子质量增加，耐高温性能降低；用DEG扩链时的耐高温性能比用DEG／TMP时的好；TDI型水性聚氨酯成膜物的耐高温性能优于IPDI型水性聚氨酯。     

Fabrication of poly(PEGMA) surface with controllable thickness gradient and its mediation on the gradient adhesion of cells

The gradient surface shows enormous potential in the development of tissue engineering, biosensor, microfluidic control, and particle sorting. In this work, a poly(polyethyleneglycol methacrylate) (poly(PEGMA)) gradient surface was prepared through surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (SI-AGRET ATRP). The effect of various parameters on the thickness growth of poly(PEGMA) film were analyzed, among which the excessive reducing agent was utmost important. The reducing agents supported the regeneration of Cu^I and eliminated the disturbance of air, maintaining the "living polymerization" of poly(PEGMA) up to 73.1 nm under tested conditions. The physicochemical properties of the fabricated surfaces were characterized by ellipsometry, X-ray photoelectron spectroscopy, water contact angle. The thickness slope of gradient poly(PEGMA) was controllable in a nanoscale range. The gradient surface was further grafted with CRGD (Cys-Arg-Gly-Asp) peptides onto the poly(PEGMA-co-[glycidyl methacrylate]) blocks via the ring-opening reaction between epoxy and amino groups, which showed a gradient change in water contact angle and adhesion of endothelial cells.     

醚菊酯的气相色谱分析

本文以气相色谱内标法建立对醚菊酯的定量分析方法,其标准偏差0.18,变异系数0.24%,线性相关0.999 996,平均回收率99.98%。