Event-driven,pattern-based methodology for cost-effective development of standardized personal health devices

Experiences applying standards in personal health devices (PHDs) show an inherent trade-off between interoperability and costs (in terms of processing load and development time). Therefore, reducing hardware and software costs as well as time-to-market is crucial for standards adoption. The ISO/IEEE11073 PHD family of standards (also referred to as X73PHD) provides interoperable communication between PHDs and aggregators. Nevertheless, the responsibility of achieving inexpensive implementations of X73PHD in limited resource microcontrollers falls directly on the developer. Hence, the authors previously presented a methodology based on patterns to implement X73-compliant PHDs into devices with low-voltage low-power constraints. That version was based on multitasking, which required additional features and resources. This paper therefore presents an event-driven evolution of the patterns-based methodology for cost-effective development of standardized PHDs. The results of comparing between the two versions showed that the mean values of decrease in memory consumption and cycles of latency are 11.59% and 45.95%, respectively. In addition, several enhancements in terms of cost-effectiveness and development time can be derived from the new version of the methodology. Therefore, the new approach could help in producing cost-effective X73-compliant PHDs, which in turn could foster the adoption of standards.     

Mobile digcovery: discovering and interacting with the world through the Internet of things

The application of Internet-enabled devices in the real world for the development of Smart Cities, environmental monitoring, bus tracking, and parking requires scalability, extensibility, and integration of emerging resources to reach a suitable ecosystem for data acquisition and interaction with citizens. Internet of things needs to offer efficient support for global communications and access to services and information. It needs to enable homogeneous and seamless machine-to-machine communication for different solutions and applications. This work presents an homogeneous and suitable mechanism for global resource discovery, device access for deployed smart objects in different scenarios, and sensors and devices from end users (participative sensing). The integration of legacy and sensors already available from smart buildings and smart objects is presented. For this purpose, a resolution infrastructure called “digcovery” is defined for maximizing efficiency and sustainability of deployments. Digcovery architecture offers the framework to allow users to register/include their own sensors into a common infrastructure and access/discover the available resources through mobile digcovery. Mobile digcovery exploits the context-awareness, geo-location, and identification technologies available in mobile platforms such as smartphones to discover, interact, and access the resources through its ElasticSearch engine.     

An Accessible Platform for People With Disabilities

This article discusses a modular, accessible platform that provides a computing environment for people with disabilities accessible through adapted control devices and the television set at users’ homes. Relying on a standard television set as the presentation device allows dependent individuals, especially people with disabilities, to introduce new technological advances in communication and information management in their everyday lives. As a proof-of-concept, the solution presented offers a collection of educational and training services related to teleworking and the search of employment targeted to people with disabilities. A smart job advisor included among these services, which was designed to help our target users to locate job offers that best suit the abilities and disabilities of a particular individual, is also discussed to illustrate how semantic technologies can be applied to increase the perceived accessibility and inclusion by reducing the dependence from other persons. The platform developed, the introduction of semantic technologies, and the way adapted interfacing and presentation devices were integrated may also serve as inspiration to provide services to people with disabilities.     

Analysis of the effects of the polymerization route of ethylene‐propylene‐diene rubbers (EPDM) on the properties of polypropylene‐EPDM blends

A comparative study of two ethylene‐propylene‐diene rubbers (EPDM) polymerized by both conventional (Ziegler–Natta catalysts) and new techniques (metallocene catalysts) is presented. For this purpose, thermoplastic elastomers based on isotactic polypropylene (iPP) and EPDM blends at different percentages were prepared and their properties examined. In particular, the processing behavior and mechanical properties are reported. So, the flow properties analyzed by torque value, melt index, and rheological study reveal that the blends containing EPDM synthesized by metallocene catalyst present a smaller viscosity, thus offering better processing behavior. On the other hand, the mechanical properties show that metallocene EPDM rubbers give rise to more elastic materials with a higher deformation at break and resilience as well as a lower compression set. Moreover, the effectiveness of these innovative EPDM rubbers as impact modifiers for PP is demonstrated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 25–37, 2002     

Degradation of the oxirane ring of epoxidized vegetable oils with solvated acetic acid using cation‐exchange resins

Vegetable oil epoxides (oxiranes) are customarily manufactured using acetic acid (AA) as oxygen carrier and reactant source, in aqueous/organic media. Further attack of the oxirane ring by AA proceeds in this acid‐catalyzed process, lowering yield. We report a study of the degradation of the ring by water‐solvated AA, using Amberlite IR‐120 as heterogeneous catalyst. The ring opening with solvated AA was found to be first order with respect to the concentration of epoxide groups and second order with respect to the carboxylic acid, with an activation energy of 58.7 ± 0.42 kJ mol^?1. This value is within the range found in liquid‐liquid systems (51.3–66.3 kJ mol^?1). Yet, using IR‐120, the degradation increases identically either by adding more mass of catalyst or by reducing its particle diameter while keeping the total mass constant, as both situations lead to higher external (exposed) area of the acidic catalyst (i.e., free protons associated to the sulfonic group) on the outer surface of the ion exchange resin beads. These free protons, in turn, become available to catalyze the attack on the oxirane groups of the long‐chain fatty acids, which cannot enter (diffuse) into the gel phase of the resin. Despite the unavoidable presence of surface‐exposed protons, the degradation can be reduced by several orders of magnitude – for similar process conditions – by using this type of heterogeneous catalysts instead of mineral acids.     

Biodegradability and improved mechanical performance of polyhydroxyalkanoates/agave fiber biocomposites compatibilized by different strategies

In this work, biocomposites made of polyhydroxyalkanoates (PHA) with natural fibers were produced via compression molding. In particular, polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate (PHBV) were reinforced with 20 wt% of agave fibers. Different compatibilization strategies were investigated to improve the fiber-matrix interaction: fiber surface treatment in PHA solution, fiber surface treatment in maleated PHA solution, fiber propionylation, and extrusion with maleated PHA. The biocomposites were characterized in terms of morphology, mechanical properties, water absorption, and biodegradability by CO₂ production tracking. In general, fiber propionylation was the best strategy for mechanical properties enhancement and water uptake decreasing. Biocomposites with propionylated fibers showed improved flexural strength (170% for PHB and 84% for PHBV). The flexural modulus was also enhanced with propionylated fibers up to 19% and 18% compared to uncompatibilized biocomposites (PHB and PHBV, respectively). Tensile strength increased by 16% (PHB) and 14% (PHBV), and the water absorption was reduced using propionylated fibers going from 6.6% to 4.4% compared with biocomposites with untreated fibers. Most importantly, the impact strength was also improved for all biocomposites by up to 96% compared with the neat PHA matrices. Finally, it was found that the compatibilization did not negatively modify the PHA biodegradability.     

Effect of the marine environment on reinforced concrete durability in Iberoamerican countries: DURACON project/CYTED

This work presents some of the results from the project: “Effect of the environment on reinforcement durability” (DURACON) in its first two-years period, which investigates the influence of urban and marine meteorochemical parameters on the performance of reinforced concrete structures. The results presented in this investigation are from 21 marine test sites only (no urban environments are included), distributed among 11 countries (Argentina, Bolivia, Brazil, Chile, Colombia, Costa Rica, Mexico, Spain, Uruguay, Portugal and Venezuela). The environment was evaluated using ISO Standard 9223 and the concrete was characterized by measuring compressive strength, elastic modulus, total and effective porosity, chloride permeability according to ASTM standards, as well as the effective porosity and resistance to water absorption using the Fagerlund method. To that effect, concrete specimens (with and without reinforcement) were prepared for electrochemical and physical/mechanical/chemical tests using the existing materials in each participating country, following strict procedures which enabled the preparation of similar concrete samples. Two water/cement (w/c) ratios (0.45 and 0.65) were selected, where the concrete with 0.45 w/c ratio had to have a minimum cement content of 400 kg/m³ and the one with 0.65 w/c ratio a compressive strength of 210 kg/cm². Type I Portland cement, siliceous sand, and crushed rock as coarse aggregates (13-mm maximum nominal size) were used. After a one-year exposure, the results of the corrosion potentiality and probability analysis of the reinforcement in the different test stations showed that, for marine atmospheres, the most aggressive environment to induce steel corrosion was at Portugal’s Cabo Raso station, and the least aggressive one was at Chile’s Valparaíso station. These results are comparable with the ones found using electrochemical measurements, after a two-year exposure.     

Fuzzy Structure of Complex Belief Systems: Fuzzy Relations and Fuzzy Belief Sets

In previous work, Nescolarde-Selva and Usó-Doménech (2014a Nescolarde-Selva, J. and J. L. Usó-Doménech. “Semiotic Vision of Ideologies.” Found Sci 19 (2014a): 263–282.[Crossref], [Web of Science ®] , [Google Scholar], b) discussed the theory that complex belief systems have a topological structure. In this article it is suggested that this structure is also fuzzy. We introduce the concepts of fuzzy sets in the context of beliefs (substantive and derived), and between derived beliefs themselves. Also introduced are the concepts of fuzzy covering and fuzzy invariance and the relationships between them.     

3D Surface Reconstruction of Noisy Point Clouds Using Growing Neural Gas: 3D Object/Scene Reconstruction

With the advent of low-cost 3D sensors and 3D printers, scene and object 3D surface reconstruction has become an important research topic in the last years. In this work, we propose an automatic (unsupervised) method for 3D surface reconstruction from raw unorganized point clouds acquired using low-cost 3D sensors. We have modified the growing neural gas network, which is a suitable model because of its flexibility, rapid adaptation and excellent quality of representation, to perform 3D surface reconstruction of different real-world objects and scenes. Some improvements have been made on the original algorithm considering colour and surface normal information of input data during the learning stage and creating complete triangular meshes instead of basic wire-frame representations. The proposed method is able to successfully create 3D faces online, whereas existing 3D reconstruction methods based on self-organizing maps required post-processing steps to close gaps and holes produced during the 3D reconstruction process. A set of quantitative and qualitative experiments were carried out to validate the proposed method. The method has been implemented and tested on real data, and has been found to be effective at reconstructing noisy point clouds obtained using low-cost 3D sensors.