Reaction-Bonding Preparation of Si3N4/MoSi2 and Si3N4/WSi2 Composites from Elemental Powders

Si₃N₄/MoSi₂ and Si₃N₄/WSi₂ composites were prepared by reaction-bonding processes using as starting materials powder mixtures of Si-Mo and Si-W, respectively. A presintering step in an At-base atmosphere was used before nitriding for the formation of MoSi₂ and WSi₂; the nitridation in a N₂-base atmosphere was followed after presintering with the total stepwise cycle of 1350°C × 20 h +1400°C × 20 h +1450°C × 2 h. The final phases obtained in the two different composites were Si₃N₄ and MoSi₂ or WSi₂; no free elemental Si and Mo or W were detected by X-ray diffraction.     

Effects of heat treatments on oxidation resistance and mechanical properties of ultra high temperature ceramic coatings

A critical point in the development of future generation space vehicles is the availability of materials able to withstand the extreme temperatures generated during orbital re-entry. UHTC (Ultra High Temperature Ceramics) materials, such as Zirconium diboride based ceramic composites, exhibit outstanding oxidation and thermal shock resistance, high emissivity and very high melting temperature: all these properties make ZrB₂ based materials possible candidates in designing thermal protection systems for the hottest structures of re-entry vehicles such as wing leading edges and nose-tip. An innovative, proprietary way to deposit ZrB₂ based coatings by plasma spraying has been developed. In the present work, the influence of high temperature exposure on oxidation resistance and mechanical properties has been investigated. Several coatings constituted by different amounts of SiC particles dispersed in a ZrB₂ matrix were produced; some samples were tested in as sprayed conditions, other ones were submitted to a high temperature heat treatment before testing. Oxidation resistance was determined by exposing samples in air at 2073 K for 180, 1800 and 2520 s. Oxidation kinetics were analyzed and modelled. Evaluation of flexural strength and elastic modulus by means of four-points bending tests were carried out on samples showing better oxidation behaviour; mechanical tests were performed also on samples exposed at a typical operative temperature (1800 s at 2073 K). Results showed that heat treatment does not affect oxidation resistance, whilst it significantly improves mechanical properties.     

Studying nematic liquid crystals by spectroscopic ellipsometry

Abstract— The optical characterization of liquid crystals, in a wide spectral range, is becoming a very important technical task because of their expanding applications in displays, optical telecommunications and other advanced areas of science and engineering. One of the most versatile, sensitive, and well‐established technique for the optical characterization of solid and liquid materials is spectroscopic ellipsometry. In this paper, an outline is presented on the use of ellipsometry for nematic liquid‐crystal characterization: anisotropic refractive‐indices measurements and their temperature dependence, anchoring energy, and tilt distribution inside cells will be discussed. The paper is an extended version of a previously published paper.¹     

Softening Effects on Bearing Capacity of Mine Floors

A major cause for massive collapse of coal mines in the Illinois Basin is the softening of mine floors. Certain materials present in mine floors soften after coal extraction resulting in bearing capacity failure of coal pillars. The softening mechanisms considered in this study were (1) slaking∕swelling due to moisture exposure; and (2) creep or strain softening due to sustained loads. The effect of floor slaking or swelling on floor stability can be fairly dramatic. In some cases, shortly after pooling of water on the mine floor, collapse occurs resulting in surface subsidence. In other cases, the time factor is greater. The effect of softening on the ultimate bearing capacity of the mine floor was assessed by modeling representative conditions using FEM and elastoplastic elements. In the models, the properties of softened mine floors were determined from results from subsurface exploration work in floor areas that were stable and others that had failed. The zone of softening was evaluated by stress-field analysis.     

Critical periods for the effects of alcohol exposure on learning in rats.

Critical periods for alcohol-induced deficits in spatial navigation and passive avoidance learning were investigated with a rat model of fetal alcohol syndrome. Rats were exposed to alcohol prenatally (Gestational Days 1–10 or 11–22) or postnatally (Postnatal Days 2–10) or throughout all 3 periods. Offspring were tested in either a spatial navigation or an avoidance task as juveniles or adults. As juveniles, the combined exposure group took longer to learn the spatial navigation task compared with all other groups. This effect was not seen in adults. Passive avoidance performance was not affected. These results suggest that long-term exposure to alcohol during development has adverse effects on spatial learning. The lack of differences in the short-term exposure groups implies that there may not be 1 critical period of alcohol exposure, but that the adverse effects of alcohol during development may be cumulative on some behaviors. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Probiotic in lamb rennet paste enhances rennet lipolytic activity, and conjugated linoleic acid and linoleic acid content in Pecorino cheese

Cheeses manufactured using traditional lamb rennet paste, lamb rennet paste containing Lactobacillus acidophilus, and lamb rennet paste containing a mix of Bifidobacterium lactis and Bifidobacterium longum were characterized for the lipolytic pattern during ripening. Lipase activity of lamb rennet paste, lamb rennet containing Lb. acidophilus, and lamb rennet containing a mix of bifidobacteria was measured in sheep milk cream substrate. Rennet paste containing probiotics showed a lipase activity 2-fold greater than that displayed by traditional rennet. Total free fatty acid (FFA) in sheep milk cream was lower in lamb rennet paste (981 μg/g of milk cream) than in lamb rennet containing Lb. acidophilus (1,382.4 μg/g of milk cream) and in lamb rennet containing a mix of bifidobacteria (1,227.5 μg/g of milk cream) according to lipase activity of lamb rennet paste. The major increase of FFA in all cheeses occurred during the first 30 d of ripening with the greatest values being observed for C16:0, C18:0 C18:1. At 60 d of ripening all cheeses showed a reduction in the amount of free fatty acids; in particular, total free fatty acids underwent a decrease of more than 30% from 30 to 60 d in cheeses manufactured using traditional lamb rennet paste, whereas the same parameter decreased 10% in cheeses manufactured using lamb rennet paste containing Lb. acidophilus and cheeses manufactured using lamb rennet paste containing a mix of B. lactis and B. longum. Cheese containing Lb. acidophilus was characterized by the greatest levels of total conjugated linoleic acids (CLA) 9-cis, 11-trans CLA and 9-trans, 11-trans CLA, whereas cheese containing bifidobacteria displayed the greatest levels of free linoleic acid. Rennet pastes containing viable cells of Lb. acidophilus and a mix of B. lactis and B. longum were able to influence the amount of FFA and CLA in Pecorino cheese during ripening.     

Validation of a confirmatory analytical method for the determination of aflatoxins B₁, B₂, G₁ and G₂ in foods and feed materials by HPLC with on-line photochemical derivatization and fluorescence detection

A sensitive and selective analytical method for the simultaneous separation and quantitative determination of aflatoxins B1, B2, G1 and G2 in foodstuffs and materials for feed has been validated. The method is based on high performance liquid chromatography with on-line post-column photochemical derivatization and fluorescence detection. The chromatographic separation of aflatoxins was accomplished using a C18 column eluted with an isocratic mobile phase consisting of water, methanol and acetonitrile. The sample preparation required a simple extraction of aflatoxins with MeOH/H2O (80:20, v/v) and a purification step by immunoaffinity column cleanup. The total analysis time, including sample preparation and chromatographic separation, did not exceed 40 min with a run time of 10 min. The on-line photochemical derivatization ensures better results in terms of simplicity, sensitivity and reproducibility with respect to chemical derivatization techniques, and provides an increase of the peak resolution and an extent of automation in comparison with the electrochemical ones. The procedure for the determination of aflatoxins in food samples and cereals for animal consumption was extensively validated following Regulation (EC) No. 882/2004. Detection limits in wheat bran samples of 0.08 μg kg1 for AFB1, 0.02 μg kg1 for AFB2, 0.16 μg kg1 for AFG1 and 0.04 μg kg1 for AFG2 were attained. The method allows high recovery with mean values ranging from 72 to 94% and it satisfies the necessary requirements for sensitivity, linearity, selectivity, precision and ruggedness, demonstrating the conformity of the method with provisions of Regulation (EC) No. 401/2006.     

Reaction of 3‐(1‐Arylsulfonylalkyl)‐indoles with Easily Enolisable Derivatives Promoted by Potassium Fluoride on Basic Alumina

Active methylene compounds and nitro derivatives react with 3‐(1‐arylsulfonylalkyl)‐indoles in the presence of potassium fluoride on basic alumina at room temperature leading to the corresponding adducts in good yields. Under basic conditions, sulfonylindoles suffer elimination of arenesulfinic acid leading to an intermediate vinylogous imine that promptly adds stabilized carbanions. The obtained 3‐indolyl derivatives are pivotal intermediates for the synthesis of indole‐based alkaloids and amino acids.     

Enhanced Stability of Detergent-Free Human Native STEAP1 Protein from Neoplastic Prostate Cancer Cells upon an Innovative Isolation Procedure

Background: The STEAP1 is a cell-surface antigen over-expressed in prostate cancer, which contributes to tumor progression and aggressiveness. However, the molecular mechanisms underlying STEAP1 and its structural determinants remain elusive. Methods: The fraction capacity of Butyl- and Octyl-Sepharose matrices on LNCaP lysates was evaluated by manipulating the ionic strength of binding and elution phases, followed by a Co-Immunoprecipitation (Co-IP) polishing. Several potential stabilizing additives were assessed, and the melting temperature (Tm) values ranked the best/worst compounds. The secondary structure of STEAP1 was identified by circular dichroism. Results: The STEAP1 was not fully captured with 1.375 M (Butyl), in contrast with interfering heterologous proteins, which were strongly retained and mostly eluted with water. This single step demonstrated higher selectivity of Butyl-Sepharose for host impurities removal from injected crude samples. Co-IP allowed recovering a purified fraction of STEAP1 and contributed to unveil potential physiologically interacting counterparts with the target. A Tm of ~55 °C was determined, confirming STEAP1 stability in the purification buffer. A predominant α-helical structure was identified, ensuring the protein’s structural stability. Conclusions: A method for successfully isolating human STEAP1 from LNCaP cells was provided, avoiding the use of detergents to achieve stability, even outside a membrane-mimicking environment.     

Experimental investigation of ice slurry heat transfer in horizontal tube

Heat transfer of ice slurry flow based on ethanol–water mixture in a circular horizontal tube has been experimentally investigated. The secondary fluid was prepared by mixing ethanol and water to obtain initial alcohol concentration of 10.3% (initial freezing temperature -4.4 °C). The heat transfer tests were conducted to cover laminar and slightly turbulent flow with ice mass fraction varying from 0% to 22% depending on test performed. Measured heat transfer coefficients of ice slurry are found to be higher than those for single phase fluid, especially for laminar flow conditions and high ice mass fractions where the heat transfer is increased with a factor 2 in comparison to the single phase flow. In addition, experimentally determined heat transfer coefficients of ice slurry flow were compared to the analytical results, based on the correlation by Sieder and Tate for laminar single phase regime, by Dittus–Boelter for turbulent single phase regime and empirical correlation by Christensen and Kauffeld derived for laminar/turbulent ice slurry flow in circular horizontal tubes. It was found that the classical correlation proposed by Sieder and Tate for laminar forced convection in smooth straight circular ducts cannot be used for heat transfer prediction of ice slurry flow since it strongly underestimates measured values, while, for the turbulent flow regime the simple Dittus–Boelter relation predicts the heat transfer coefficient of ice slurry flow with high accuracy but only up to an ice mass fraction of 10% and Re_cf > 2300 regardless of imposed heat flux. For higher ice mass fractions and regardless of the flow regime, the correlation proposed by Christensen and Kauffeld gives good agreement with experimental results.