Simultaneous determination of neonicotinoid insecticides in sunflower-treated seeds (hull and kernel) by LC-MS/MS

A validated analytical method to determine seven neonicotinoids (dinotefuran, nitenpyram, thiamethoxam, clothianidin, imidacloprid, acetamiprid and thiacloprid) in sunflower seeds (hull and kernel) using HPLC coupled to electrospray ionisation mass spectrometry (ESI-MS) is presented. Sample clean-up based on a solid–liquid extraction, and the removal of lipid fraction, in the case of kernels, is proposed and optimised. Low limits of detection and quantification were obtained, ranging from 0.3 × 10^–3 to 1.2 × 10^–3 µg g^–1 and from 1.0 × 10^–3 to 4.0 × 10^–3 µg g^–1, with good precision, and recovery values ranged from 90% to 104% for hulls and kernels. The method was applied for the analysis of five thiamethoxam-dressed sunflower seeds and four non-treated seeds, where, besides thiamethoxam, residues of the other neonicotinoid, clothianidin, were also detected and confirmed via tandem mass spectrometry (LC-ESI-MS/MS). Finally, the presence of residues of thiamethoxam and clothianidin in collected sunflower seeds (hulls) coming from coated seeds confirmed the translocation of these neonicotinoids through the plant up to these seeds.     

Effects of ozone and chlorine postharvest treatments on quality of fresh‐cut red bell peppers

The effects of chlorine (200 μL L^?1), ozonated water (1 μL L^?1) and gaseous ozone (0.7 μL L^?1) on physicochemical attributes and microbial quality of minimally processed red bell peppers were studied. In all the experiments, O₂ continuously decreased and CO₂ concentration increased, the pH augmented and a significant softening was observed in all the fruits. By day 14, L* values decreased in all the fruits, with the greatest changes found in the chlorinated samples (approximately 12 units). Peppers treated with the aqueous solutions showed greater changes in the quality attributes with increasing washing times and especially when chlorine was used. The exposure for three min to gaseous O₃ reduced the mesophiles, psychrotrophes and fungal populations of the fresh‐cut peppers in 2.5, 3.3 and 1.8 log units, respectively. Combined with modified atmosphere, this could be an appropriate method to maintain the quality and extend the storage period of minimally processed red bell peppers.     

The moderating effect of user experience on satisfaction with electronic banking: empirical evidence from the Spanish case

The aim of this paper is to contribute to the field of satisfaction research from the perspective of electronic banking users—a topic of great interest to financial institutions as they formulate business strategies. In this context, we analyze the possible moderating effect of user experience with the products of a specific institution. A comprehensive review of the scientific literature justified the development of a behavioral model that explains satisfaction using a set of constructs or endogenous variables and the moderating effect of experience. Data was collected from a self-administered Web survey in the authenticated section of the electronic banking service of a prestigious Spanish National financial institution. The analysis tests the relationship between the proposed variables (ease of access, trust, ease of use and usefulness) and demonstrates the moderating effect of electronic banking experience on them. The study was limited to the data of a single financial institution. Caution should therefore be exercised in generalizing the results. The research results provide a number of valuable conclusions for financial institutions. This paper is a pioneer study of satisfaction with electronic banking, especially with regard to the causal relationships between satisfaction and its main determinants.     

A review of manufacturing flexibility: systematising the concept

The present work is an attempt to contribute to the conceptual systematisation of the manufacturing flexibility types by synthesising the vast literature available after a systematic review. We classified the papers in two perspectives (hierarchical and strategic), and engaged in a systematic process of standardisation of the definitions and names of various flexibility types leading to a better understanding of them. This process allowed us to clearly show: (a) the existence of a broader consensus in the field than expected; (b) that problems are limited to concrete aspects related to the level of analysis or the scope of certain flexibility types; (c) the possibility of a theoretical integration between the two perspectives which would permit a standardisation of the names and definitions for the flexibility types which make up the manufacturing flexibility construct.     

Review of the environmental policy instruments in the standardization of H2 for the decarbonization of Mexico

The objective of this work is to review the environmental and ecological policy instruments that Mexican legislation for existence of an Official Mexican Hydrogen Standard according to the premises motivates decarbonization. There is a worldwide interest in hydrogen (H₂) and its incorporation into legal systems. In Mexico there are large legal gaps that question the legality of H₂, because it is not recognized in a federal law and is only considered in technical standards of voluntary application. Also, Mexico has forest, agricultural, and livestock waste that, if properly used, can cover the energy demand of communities. The main findings of this study refer to the fact that, according to international standards for the management of H₂ and taking into account the regulatory limitations in Mexico, it is possible to promote, an Official Mexican Standard exclusively aimed at establishing the minimum requirements for the design, construction, operation and maintenance of H₂ storage, considering the areas of the opportunity offered by foreign experiences, according to the Mexican context. It is concluded that the parameters of legality exist in the instruments of environmental policy, to support the existence of an Official Mexican Standard of H₂.     

WYPiWYG Damage Mechanics for Soft Materials: A Data-Driven Approach

The conservative elastic behavior of soft materials is characterized by a stored energy function which shape is usually specified a priori, except for some material parameters. There are hundreds of proposed stored energies in the literature for different materials. The stored energy function may change under loading due to damage effects, but it may be considered constant during unloading–reloading. The two dominant approaches in the literature to model this damage effect are based either on the Continuum Damage Mechanics framework or on the Pseudoelasticity framework. In both cases, additional assumed evolution functions, with their associated material parameters, are proposed. These proposals are semi-inverse, semi-analytical, model-driven and data-adjusted ones. We propose an alternative which may be considered a non-inverse, numerical, model-free, data-driven, approach. We call this approach WYPiWYG constitutive modeling. We do not assume global functions nor material parameters, but just solve numerically the differential equations of a set of tests that completely define the behavior of the solid under the given assumptions. In this work we extend the approach to model isotropic and anisotropic damage in soft materials. We obtain numerically the damage evolution from experimental tests. The theory can be used for both hard and soft materials, and the infinitesimal formulation is naturally recovered for infinitesimal strains. In fact, we motivate the formulation in a one-dimensional infinitesimal framework and we show that the concepts are immediately applicable to soft materials.     

Software for simulating dichromatic perception of video streams

We have designed a configurable stand‐alone Matlab‐based software to simulate dichromatic perception of video streams. The algorithm used is an extension for video streams of the “corresponding pair algorithm” by Capilla and coworkers for simulation of dichromatic perception of images. The software allows the user to upload a video sequence and to process it using different dichromatic color vision models and viewing conditions. The output video may be generated in different spatial and temporal resolutions and file formats. The functions for Matlab environment and a stand‐alone application may be downloaded from the Repository of the University of Alicante. © 2013 Wiley Periodicals, Inc. Col Res Appl, 39, 486–491, 2014     

Optimal greenhouse gas emissions in NGCC plants integrating life cycle assessment

The optimal design of an energy-intensive process involves a compromise between costs and greenhouse gas emissions, complicated by the interaction between optimal process emissions and supply chain emissions. We propose a method that combines generic abatement cost estimates and the results of existing (LCA) life cycle assessment studies, so that supply chain emissions are properly handled during optimization. This method is illustrated for a (NGCC) natural gas combined cycle power plant model with the following design and procurement options: procurement of natural gas from low-emissions producers, fuel substitution with (SNG) synthetic natural gas from wood, and variable-rate CO₂ capture and sequestration from both the NGCC and SNG plants. Using multi-objective optimization, we show two Pareto-optimal sets with and without the proposed LCA method. The latter can then be shown to misestimate CO₂ abatement costs by a few percent, penalizing alternate fuels and energy-efficient process configurations and leading to sub-optimal design decisions with potential net losses of the order of $1/MWh. Thus, the proposed LCA method can enhance the economic analysis of emissions abatement technologies and emissions legislation in general.