改进的锥形滚子轴承装置面临现代货车变速箱的日益严格的性能 …

本文作者注意到不同的强化可以提高货车变速箱的锥形滚子轴承的性能,结果有助于这些齿轮箱满足制造者和操作者对延长使用寿命和消除噪音,车辆运行更经济等较高的期望。这些强化包括如下Ｐ９００＾ＴＭ的设计原理和最大的功率系数;抗碎片污染和摩擦腐蚀等。本文还注意到应用改进轴承的优点,用非线性有限元分析去设计货车变速箱。     

Adaptive channel allocation for wireless PCN

In cellular networks, forced call terminations due to handoff call blocking are generally more objectionable than new call blocking. In order to maintain an acceptable call dropping probability rate, we propose, in this paper, two new guard channel schemes: an adaptive one – New Adaptive Channel Reservation (NACR) – and a dynamic one – Predictive Reservation Policy (PRP). In NACR, for a given period of time, a given number of channels is guarded in each cell for handoff traffic. In PRP, the number of reserved channels depends on the actual number of calls in progress in the neighboring cells. An approximate analytical model of NACR is presented. A Tabu search method has been implemented in order to optimize the Grade of Service. Discrete event simulations of PRP and NACR were run. The effectiveness of the proposed methods is emphasized on a complex configuration.     

Analysis of the association of a heat shock protein70-1 gene promoter polymorphism with myocardial infarction and coronary risk traits

In 12 depressed inpatients referred for bilateral electroconvulsive therapy (ECT), each patient was titrated at the first treatment session by using an ascending method-of-limits procedure with a step-wise increase in pulse frequency (frequency titration) or train duration (duration titration). At the second treatment session, seizure threshold was redetermined by using the method (frequency or duration titration) not used at the first treatment. Frequency or duration was maintained at the lowest level when the other parameter was titrated. Seizure threshold was significantly lower with duration titration (mean, 90 mC; SD, 27.3) than frequency titration (mean, 114 mC; SD, 35.6; p = 0.03). On average, patients in the duration-titration group required 1.2 (SD, 0.6) subconvulsive stimulations before a seizure was elicited, and patients in the frequency-titration group required 1.7 (SD, 0.9) subconvulsive stimulations before a seizure was elicited, a nonsignificant difference. These findings suggest that to elicit a seizure during ECT, increasing train duration may be slightly more efficient than increasing frequency. Basic and other clinical research findings indicate that increasing pulse width may be an inefficient way to elicit a seizure. Therefore the following sequence in the determination of seizure threshold is worth considering when using dose-titration or related techniques: the train duration should be increased first before increasing pulse frequency, and the decision to increase pulse width should be reserved for patients who do not seize at the maximal duration and frequency settings. Further empiric research is needed to establish the utility of this approach.     

Modeling multi-rate DSP specification semantics for formal transformational design in HOL

The CATHEDRAL Silicon Compilers synthesize hardware for DSP algorithms specified in Silage, a high level applicative language. In order to optimize the results of the silicon compilation in terms of chip-area and/or throughput, the user often massages the specification applying transformations to the Silage code. To guarantee that the transformations preserve the behavior of the specified algorithm, the formal semantics of the specification language had to be defined. The semantics has been used to prove in HOL the correctness of the transformations and to prove properties of the specification. We are currently building a system where a menu of useful andcorrectness preserving transformations will be available to the user. In this system the user could choose appropriate transformations from the menu taking advantage of his creativity and expertise to interactively guide the silicon compiler, without the risk of introducing inconsistencies. This article describes the formalmulti-rate semantics of a substantial subset of Silage and illustrates some formally verified transformations.     

Measurement of the azimuthal dependence of cross-polarized lidar returns and its relation to optical depth

We measure with a gated intensified CCD camera the cross-polarized backscattered light from a linearly polarized laser beam penetrating a cloud made of spherical particles. In accordance with previously published results we observe a clear azimuthal pattern in the recorded images. We show that the pattern is symmetrical, that it originates from second-order scattering, and that higher-order scattering causes blurring that increases with optical depth. We also find that the contrast in the symmetrical features can be related to measurement of the optical depth. Moreover, when the blurring contributions are identified and subtracted, the resulting pattern provides a pure second-order scattering measurement that can be used for retrieval of droplet size.     

Experimental method based on wavelength-modulation spectroscopy for the characterization of semiconductor lasers under direct modulation

An experimental method is presented for characterization of the combined intensity and frequency modulation produced when the injection current of a laser diode is modulated. The reported technique is based on the analysis of the harmonic signals produced when a modulated laser is used to probe a gas absorption line by the so-called wavelength-modulation spectroscopy method. Based on a theoretical model of this technique, we present two methods that facilitate the determination of (i) the deviation in laser frequency and (ii) the phase shift between intensity and frequency modulation. These methods are illustrated experimentally by measurement of the modulation parameters of a 2-microm distributed-feedback laser by use of a CO2 absorption line. The experimental results have been compared with those obtained with another traditional method and have shown full agreement in the frequency range (400 Hz-30 kHz) considered.     

Growth and energy generation by Enterococcus faecium FAIR-E 198 during citrate metabolism

Citrate metabolism by Enterococcus faecium FAIR-E 198, isolated from Greek Feta cheese, was studied in various growth media containing citrate either in the presence of glucose, or as the sole carbon source, both under aerobic and anaerobic conditions. In de Man-Rogosa-Sharpe (MRS) broth with increasing citrate concentrations, cometabolism of citrate and glucose took place. Glucose was stoichiometrically converted into lactate, while citrate into acetate. Glucose consumption and biomass yield were enhanced with increasing initial citrate concentrations, even though maximum specific growth rate was not. When citrate was used as the sole carbon source in increasing initial concentrations, the main end product was acetate. Small amounts of lactate, formate, ethanol, and acetoin were also produced. In all cases, no significant differences were observed between aerobic and anaerobic conditions. However, when citrate was used as sole carbon source, formate production was favored in the absence of oxygen. The present work shows that E. faecium is able to utilize citrate in synthetic media, either in the presence of glucose or as the sole carbon source, resulting in energy production and the formation of aroma compounds.     

Compound-specific carbon isotope analysis of volatile organic compounds in the low-microgram per liter range

Compound-specific carbon isotope analysis (CSIA) has become an important tool in biological, archeological, and geological studies as well as in forensics, food sciences, and organic chemistry. If sensitivity could be enhanced, CSIA would further have an improved potential for environmental applications such as, for example, in situ remediation studies to assess contaminated environments, identification of pollutant degradation pathways and kinetics, distinction between degradation/formation mechanisms, or, verification of contaminant sources. With this goal in mind, we have developed methods to determine delta13C values of commonly reported groundwater contaminants in low-microgram per liter concentrations. Several injection and preconcentration techniques were evaluated for this purpose, i.e., on-column injection, split/ splitless injection, solid-phase microextraction (SPME), and purge and trap (P&T) in combination with gas chromatography-isotope ratio mass spectrometry. The delta13C values of the target compounds were determined by liquid injections of the analytes dissolved in diethyl ether or, in the case of P&T and SPME, by extraction from water spiked with the analytes. P&T extraction was the most efficient preconcentration technique reaching method detection limits (MDLs) from 0.25 to 5.0 microg/L. These are the lowest MDLs reported so far for continuous-flow isotope ratio determinations, using a commercially available and fully automated system. Isotopic fractionation resulting from preconcentration and injection was investigated and quantified for the priority groundwater pollutants methyl tert-butyl ether (MTBE), chloroform, tetrachloromethane, chlorinated ethylenes, benzene, and toluene. The isotopic fractionations caused by the extraction techniques were small but highly reproducible and could therefore be corrected for. P&T was characterized by a higher reproducibility and smaller isotopic fractionations than SPME. Among the liquid injection techniques, cold on-column injection resulted in slightly better precision compared to split/splitless injection. However, the MDLs determined for liquid injections were 4-6 orders of magnitude higher (i.e., 9.5-2800 mg/L) than for P&T and SPME. Since both of the latter methods are solventless, a better chromatographic resolution was obtained than for the liquid injection techniques. The P&T and SPME methods described here are also applicable for CSIA of D/H ratios, which require 10-20 times higher analyte concentrations than 13C/12C analysis. Finally, the applicability of the described methods is demonstrated for pollutant concentrations of only 5-60 microg/L in environmental samples.     

Contribution of epididymal secretory proteins for spermatozoa maturation

The final stages of sperm differentiation occur outside the gonad and are not under the genomic control of germ cells. Only sequential interactions with the medium surrounding the sperm are believed to induce the final steps of spermatogenesis. The epididymis, a long tubule with very active secretory and reabsorption functions, is able to create sequential changes in the composition of luminal fluid throughout its length. The chronologies of the changes, which occur on/in the sperm with those in their surrounding environment, are described. Correlations between the highly regionalized epididymal activities and sperm characteristics linked to their survival and fertility potential are presented in this review.     

Further characterization of rat dihydroceramide desaturase: Tissue distribution, subcellular localization, and substrate specificity

The introduction of the double bond in the sphingoid backbone of sphingolipids occurs at the level of dihydroceramide via an NADPH-dependent desaturase, as discovered in permeabilized rat hepatocytes. In the rat, the enzyme activity, which has now been further characterized, appeared to be mostly enriched in liver and Harderian gland. By means of subcellular fractionation of rat liver homogenates and density gradient separation of microsomal fractions, the desaturase was localized to the endoplasmic reticulum. Various detergents were inhibitory to the enzyme, and maximal activities were obtained in the presence of NADPH and when the substrate was complexed to albumin. In the presence of albumin, the chain length of the fatty acid of the truncated dihydroceramides hardly affected the activity. Finally, in view of a likely evolutionary relationship between desaturases and hydroxylases, the formation of hydroxylated intermediates was analyzed. No evidence for their presence was found under our assay conditions. In part presented at the Conférence Jacques Monod “Cell lipids: Topology, transport and signalling functions”, Aussois, May 1997 (France); Van Veldhoven, P.P. “Ceramide biosynthesis: Characterisation of the conversion of dihydroceramide to ceramide”. Contributed equally to this study.