Reliability-based design optimization applied to structures submitted to random fatigue loads

Structural and Multidisciplinary Optimization - The reliability-based design optimization (RBDO) aims to find the most balanced design through a compromise between cost and safety when...     

Fabrication and characterization of silk/forsterite composites for tissue engineering applications

In this research, novel composite scaffolds consisting of silk fibroin and forsterite powder were prepared by a freeze-drying method. In addition, the effects of forsterite powder contents on the structure of the scaffolds were investigated to provide an appropriate composite for bone tissue engineering applications. The morphology studies using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques showed that the forsterite ceramic was well distributed throughout the structures of SF/forsterite scaffolds. Furthermore, the forsterite powder (up to 40 wt%) was homogenously distributed within the silk fibroin as a matrix.     

以创新的保护方法适应ESD保护界线变化

设计工程师为了应对诸如HDMI、SATA、MIPI和DisplayPort等新的输入/输出（I/O）接口要求的更高数据率,必须考虑降低ESD保护器件的电容。然而,由于更精微的工艺几何尺寸更易受到ESD冲击的影响,制造商迫切期望提供更高等级的保护。     

The effect of monoethylene glycol on the stability of water-in-oil emulsions

It is important from both a strategic and economic standpoint to study the mechanism of formation of water/oil emulsions, to predict their increase of viscosity with respect to that of the crude oil, and to obtain information about the stability vs separation of these substances (since their presence can impair oil processing and distribution). The objective of this work was to ascertain the influence of monoethylene glycol (MEG) on these parameters and its action mechanism. The addition of MEG in different proportions in the oil emulsions significantly changed the flow curve of the emulsion, passing from a quasi-Newtonian one to a shear thinning behaviour. Besides this, when MEG was present at low concentrations, the demulsification process was slow and an increase in concentration made the emulsions more stable than samples containing the same aqueous phase proportion. Under the conditions studied, the addition of MEG did not reduce the quantity of the aqueous phase separated compared to the emulsions free of MEG, but significantly delayed the demulsification process. Rheology provided important information regarding the phase separation process of the aqueous phase in oil phase emulsions, and dynamic testing suggested that the most relevant effect of the addition of MEG is an increase of the emulsion elasticity that can be correlated with the increase in the emulsion stability observed by bottle test and Turbiscan.     

Zn–Ni/nano-TiO2 composite electrodeposits: surface modifications and protective properties

Zn–Ni composite coatings were obtained by electrochemical co-deposition of TiO₂ nano-particles (mean diameter 21 nm). Zn–Ni alloy coating was also produced under the same experimental conditions for comparison. The surface morphology, crystallographic structure, and the grain size of the deposits were investigated, along with the percentage of the embedded nano-particles in Zn–Ni matrix, as a function of concentration of TiO₂ nano-particles in the bath. As the titania incorporation percentage is increased, a grain refinement in the nanometer region was revealed followed enhanced microhardness values and an improvement of the content of the nickel in the alloy. Annealing of all coatings at 200 °C revealed the crystallization of the matrix accompanied by a decrease of microhardness followed by stability for 24 h. The corrosion behavior of Zn–Ni/nano-TiO₂ composite coatings with various amount of particle content was mainly studied by electrochemical impedance spectroscopy in 3 % NaCl. It was seen that Zn–Ni/nano-TiO₂ composite coatings exhibited higher corrosion resistances comparing to Zn–Ni alloy coating and corrosion protection improved with increasing nano-TiO₂ in coatings.     

Hydrogels containing silver nanoparticles for burn wounds show antimicrobial activity without cytotoxicity

This research introduces a novel dressing for burn wounds, containing silver nanoparticles in hydrogels for infected burn care. The 2‐acrylamido‐2‐methylpropane sulfonic acid sodium salt hydrogels containing silver nanoparticles have been prepared via ultraviolet radiation. The formation of silver nanoparticles was monitored by surface plasmon bands and transmission electron microscopy. The concentration of silver nitrate loaded in the solutions slightly affected the physical properties and mechanical properties of the neat hydrogel. An indirect cytotoxicity study found that none of the hydrogels were toxic to tested cell lines. The measurement of cumulative release of silver indicated that 70%–82% of silver was released within 72 hr. The antibacterial activities of the hydrogels against common burn pathogens were studied and the results showed that 5 mM silver hydrogel had the greatest inhibitory activity. The results support its use as a potential burn wound dressing. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40215.     

Reductive removal of hexavalent chromium from aqueous solution using sepiolite-stabilized zero-valent iron nanoparticles: Process optimization and kinetic studies

We studied the optimization of hexavalent chromium (Cr(VI)) removal from aqueous solution using the synthesized zero-valent iron nanoparticles stabilized with sepiolite clay (S-ZVIN), under various parameters such as reaction time (min), initial solution pH and concentration of S-ZVIN (g·L^?1) using response surface methodology (RSM). The kinetic study of Cr(VI) was conducted using three types of the most commonly used kinetic models including pseudo zero-order, pseudo first-order, and pseudo second-order models. The rate of reduction reaction showed the best fit with the pseudo first-order kinetic model. The process optimization results revealed a high agreement between the experimental and the predicted data (R²=0.945, Adj-R²=0.890). The results of statistical analyses showed that reaction time was the most impressive factor influencing the efficiency of removal process. The optimum conditions for maximum response (98.15%) were achieved at the initial pH of 4.7, S-ZVIN concentration of 1.3 g·L^?1 and the reaction time of 75 min.     

Phytochemical and bioactive compounds identification of Ocimum tenuiflorum leaves of methanol extract and its fraction with an anti-diabetic potential

Phytochemical screening assay on crude extracts of Ocimum tenuiflorum L. leaves and methanol fractions was performed in this study. Phytochemical qualitative assay on aqueous crude extract and aqueous fraction did not show any steroid and terpenoid. However, ethanol and butanol fractions also did not show steroid in the screening test. The result of HPLC identification of active crude extracts and active fractions showed the possible bioactive compounds in this plant extracts, which may control diabetes. These findings showed that the active crude extract (methanol) and its active fractions (ethyl acetate, and butanol) showed the presence of polyphenolic active constituents such as 3,4-dimethoxycinnamic acid, caffeic acid, diosmetin, luteolin, kaempferol, rosmarinic acid, apigenin, and genistein that control the blood glucose in diabetic rats. Furthermore, isolation of the active components may pave the way for the development of new agents for the treatment of diabetes and its complications.     

A novel method to investigate tensile properties of woven fabrics in all-direction

In this research, we propose a new method and instrument to measure load-extension curve of the fabric samples under all-directional extension. Using this method, fabric sample is loaded under extension in the warp, weft, and all other directions in between. Using this new method, we introduced a comprehensive tensile modulus which is affected by the fabric structures and densities. For this purpose different structures i.e. plain, Twill 2/2, Twill 1/3, and Twill 1/7 were produced with different densities. Then these samples were tested under the new method. Our results are then compared to those one would obtain under uniaxial tests, by performing independent uniaxial tests. It is shown that under all-directional test lowering the weft density decreases the tensile comprehensive modulus. Furthermore, a reduction in the floating yarns in the fabric structure decreases the tensile comprehensive modulus. It was found that among the samples tested here, plain fabric and Twill 1/7, respectively, possess the maximum and minimum comprehensive modulus. A similar trend was also observed through independent uniaxial extension, in warp or weft direction, test.