Estimation of bacterial production through the coupling of (methyl 3H) Thymidine incorporation and several parameters over a Microcystis aeruginosa bloom in a hypereutrophic reservoir

The coupling of the changes in bacterial quantitative and metabolic aspects during Microcystis aeruginosa bloom conditions together with several environmental parameters was studied in the hypereutrophic Villerest reservoir, France. Bacterial abundance varied from 5.20 to 21.28 × 10⁶ bacteria-mL^?1, while bacterial biomass ranged between 75 and 507 μg C mL^?1. These results confirmed the highly eutrophic status of the Villerest reservoir. The relative quantitative importance of attached bacteria increased as Microcystis proliferated. Methyl-³H incorporation and D-(U-¹⁴C) glucose uptake varied from 8.99 to 60.57 × 10⁶ cells-mL^?1, and 0.016 to 1.587 μg CL^?1 h^?1, respectively. Correlations between several abiotic and biotic parameters showed that phytoplankton regulated bacterial growth by releasing organic carbon which is directly uptaken by heterotrophic bacteria. In the hypolimnion, the sedimentation of decaying algae represented a substantial substrate for bacterial growth.     

An improved method for magnetic identification and localization of cracks in conductors

A SQUID magnetometer can be used to measure the magnetic field produced by flaws in a two-dimensional, conducting plate carrying a current. Identification of the flaw-induced magnetic field is difficult because of the large magnetic field associated with the edges of the plate and the current in the leads that connect the plate to the power supply. We have developed a technique by which the wire and edge fields can be cancelled prior to mapping the magnetic field. In this technique, a similar unflawed conducting sheet is placed adjacent to the flawed plate, with a connection between the sheet and the plate at one edge, and with the opposite edges of the sheet and of the plate connected to the two conductors of a coaxial cable. Thus, an applied current will flow along one conductor of the cable, across the cancelling sheet, cross into the flawed plate, return along the plate, and then return to the power supply along the other conductor of the coaxial cable. As a result of this geometry, there is no magnetic field from the lead-in wires because they are coaxial, and the magnetic field due to the edges of the plate is cancelled by the opposing magnetic field of the edges in the adjacent sheet. The extent of cancellation is determined primarily by the separation between the plate and the cancelling sheet, by the thickness of the plate, and by macroscopic inhomogeneities in their electrical conductivities.     

Intentionality in human gait control: Modifying the frequency-to-amplitude relationship.

Tight frequency-to-amplitude relationships are observed in spontaneous human steady gait. If required, however, they can be modified. The following experiments were aimed at the processes underlying this flexibility, which forms the fundamental basis of the intentional adaptive capabilities of locomotion. In Exp 1, Ss had to intentionally modify the frequency-to-amplitude relationship (leading to preferred or nonpreferred steady states). In Exp 2, they had to temporarily perturbate the stride-frequency-to-amplitude relationship to intentionally shorten or lengthen 1 stride. Within the important constraints exerted by the head–arm–trunk system on leg movement, the results pointed out 2 main strategies that allow the S to intentionally adapt stride organization on-line: adjustment of the tonic properties of the oscillating leg to achieve nonpreferred steady states and phasic action to ensure temporary movement away from a steady state. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Phase Equilibria in the Na2O-Cs2O-SiO2 System

The Na₂O-Cs2O-SiO₂ system has been investigated by means of a new differential thermal analysis apparatus. Two compounds have been observed for the first time in the metasilicate and disilicate joins. The CsNaSi₂O₅ disilicate melts congruently at 1217 K and the peritectic fusion of the CsNaSiO₃ metasilicate occurs at 1120 K.     

Differentiation of apple juice samples on the basis of heat treatment and variety using chemometric analysis of MIR and NIR data

The potential of mid-infrared (MIR) and near-infrared (NIR) spectroscopy for their ability to differentiate between apple juice samples on the basis of apple variety and applied heat-treatment was evaluated. The heat-treatment involved exposure of juice samples (15 ml) for 30 s in a 900 W microwave oven and the apple varieties used to produce the juice samples were Bramley, Elstar, Golden Delicious and Jonagold. The chemometric procedures applied to the MIR and NIR data were partial least squares regression (PLS1 for differentiation on the basis of heat-treatment, PLS2 for varietal differentiation) and linear discriminant analysis (LDA) applied to principal component (PC) scores. PLS1 and PLS2 gave the highest level of correct classification of the apple juice samples according to heat-treatment (77.2% for both MIR and NIR data) and variety (78.3–100% for MIR data; 82.4–100% for NIR data), respectively.     

Evaluating Ozone as a Remedial Treatment for Removing RDX from Unsaturated Soils

Years of wastewater discharge at the Department of Energy’s Pantex Plant have contaminated the vadose zone and underlying perched aquifer with hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Because the vadose zone is acting as a continual source of groundwater contamination, removing RDX from the unsaturated zone is paramount to prevent further contamination. We determined the efficacy of ozone to degrade and mineralize RDX. Solution experiments showed that ozone (27?mg?L?1; 150?mL?min?1) was effective in mineralizing 80% of the RDX (30?mg?RDX?L?1) provided that some Pantex soil was present to buffer the solution pH. Soil columns treated with ozone produced 50% RDX mineralization within 1 day and >80% within 7 day. Experiments designed to evaluate aerobic biodegradation following partial ozonation of a RDX solution showed that ozone-generated RDX products were much more biodegradable than untreated controls in aerobic microcosms (35 versus <0.3% cumulative mineralization). These results support the use of ozone as a remedial treatment for the contaminated vadose zone at the Pantex facility.     

Three-dimensional simulation with a CFD tool of the airflow phenomena in single floor double-skin facade equipped with a venetian blind

Nowadays different kinds of double-skin facades are developed and used in new architectural projects. The aim of these facades is, on the one hand, to increase internal comfort and, on the other hand, to decrease energy consumption. In order to optimise the overall performance of the double-skin façades, their detailed behaviour needs to be better understood. The prediction of the airflow within the channel (between the two glazings) is very important for understanding of the double-skin facades behaviour, especially in summer conditions. A comprehensive modelling of a compact double-skin facade equipped with a venetian blind and forced ventilation is proposed here. The modelling is done using the CFD (computational fluid dynamics) approach to assess the air movement within the ventilated facade channel. Three-dimensional airflow is modelled using a homogeneous porous media representation, in order to reduce the size of the mathematical model. A parametric study is proposed here, analysing the impact of three parameters on the airflow development: slat tilt angle, blind position and air outlet position. The distance between the blind and the external glazing was found to have a major impact on the velocity profiles inside the double-skin facade channel.     

Remote sensing of species mixtures in conifer plantations using LiDAR height and intensity data

In even-aged, single species conifer plantations LiDAR height data can be modelled to provide accurate estimates of tree height and volume. However, it is apparent that growth models developed for single species stands are not directly transferable to a more general situation of mixed species plantations. This paper evaluates the ability of small footprint, dual-return, pulsed airborne LiDAR data to estimate the proportion of the productive species when mixed with a nurse crop in closed canopy plantations. A study area located in Galloway Forest District in Scotland is used as an example of Lodgepole pine and Sitka spruce mixed plantation; this area contains good examples of a wide range of pure and mixed species plantation types. Three species groups are studied: areas of pure Sitka spruce, areas of pure Lodgepole pine and areas where the two species have been planted together. Two approaches are assessed for detection of plantation mixtures: the first uses LiDAR intensity data to separate spruce and pine species and the second uses LiDAR-derived canopy density measures, coefficient of variation, skewness, percent of ground returns (which provides a measure of canopy openness) and the mean canopy height, which enables areas with height variations to be identified. From analysis of LiDAR data extracted from 54 study plots using logistic regression, the coefficient of variation and LiDAR intensity data provide the most useful predictors of the proportion of spruce in a pine/spruce mixture with coefficients of determination (R²) of 0.914 and 0.930 respectively. The method could be developed as a mapping tool, which in combination with existing inventory data should help to improve timber volume forecasting for mixed species even-aged plantations.