低挥发分煤在新型干法窑生产中的应用

对劣质煤、低挥发分煤的燃烧特性分析,工艺设备分析,提出预分解窑烧劣质煤、低挥发分煤的可能性、必要性,为我公司烧劣质煤、无烟煤打下了基础。     

Efficient multilevel image segmentation through fuzzy entropy maximization and graph cut optimization

The fuzzy c-partition entropy has been widely adopted as a global optimization technique for finding the optimized thresholds for multilevel image segmentation. However, it involves expensive computation as the number of thresholds increases and often yields noisy segmentation results since spatial coherence is not enforced. In this paper, an iterative calculation scheme is presented for reducing redundant computations in entropy evaluation. The efficiency of threshold selection is further improved through utilizing the artificial bee colony algorithm as the optimization technique. Finally, instead of performing thresholding for each pixel independently, the presented algorithm oversegments the input image into small regions and uses the probabilities of fuzzy events to define the costs of different label assignments for each region. The final segmentation results is computed using graph cut, which produces smooth segmentation results. The experimental results demonstrate the presented iterative calculation scheme can greatly reduce the running time and keep it stable as the number of required thresholds increases. Quantitative evaluations over 20 classic images also show that the presented algorithm outperforms existing multilevel segmentation approaches.     

圆盘反应器中的PET缩聚过程

利用薄膜实验研究了PET缩聚过程反应和传质规律 ,建立了链增长、链降解反应动力学模型和泡沫脱挥时的传质速率方程 ;通过冷模实验研究了圆盘反应器中PET的混合、流动、成膜、膜表面更新以及传质规律 ;综合了反应和反应器研究结果 ,建立了圆盘反应器中的PET缩聚过程模型 ,对圆盘反应器中的PET缩聚过程进行了仿真分析 ,考察了温度、压力、停留时间、转速、催化剂浓度、负荷大小等各种因素的影响     

改性凹凸棒土净化含铬废水的研究

将凹凸棒土进行改性处理，用于对含铬废水中铬离子的吸附。本文研究了改性方式、凹凸棒土用量、吸附时间、pH值对含铬废水中铬离子净化率的影响。     

废弃木粉与短切玻璃纤维组合增强聚丙烯的力学性能

用废弃木粉与短切玻璃纤维作为增强材料，制得了组合增强的聚丙烯复合材料，研究了制备工艺及设备、材料配方及界面改性方法等对材料力学性能的影响。结果表明，用单螺杆挤出机制备组合增强材料，可减少对玻璃纤维的损伤，保持较长的玻璃纤维，有利于其增强作用的发挥；随着玻璃纤维含量的增加，体系的力学性能提高，而木粉含量对材料力学性能的影响与玻璃纤维的含量相关；采用硅烷偶联剂对木粉进行表面处理，在基体中添加接枝极性基团的改性聚丙烯，可改善体系的界面结合，提高力学性能。     

碳纤维片材加固钢筋混凝土梁的问题探讨

碳纤维片材加固钢筋混凝土梁的问题包括碳纤维片材加固钢筋混凝土梁的应用前提、钢筋混凝土梁斜向贴碳纤维抗剪加固承载力计算和使用阶段加固梁的验算公式。这些问题是对现行规范的补充和完善,并提出有待进一步研究的问题。     

氧化亚铜纳米线的制备及其光电性能

摘要：通过电沉积法在阳极氧化铝模板中制备了Cu2O纳米线，利用X射线衍射(XRD)、扫描电子显微镜(SEM)对Cu2O纳米线的组成和形貌进行了表征，并测试了Cu2O/AAO阵列体系的光电压、交流阻抗性能。测试结果表明，制备的Cu2O纳米线的直径约120nm，长约2μm；Cu2O/AAO阵列体系在紫外灯(365nm)照射下，光电压约25mV, 阻抗值大大减小。     

Effect of nano‐silica filler on the rheological and morphological properties of polypropylene/liquid‐crystalline polymer blends

A fumed hydrophilic nano‐silica‐filled polypropylene (PP) composite was blended with a liquid‐crystalline polymer (LCP; Rodrun LC5000). The preblended polymer blend was extruded through a capillary die; this was followed by a series of rheological and morphological characterizations. The viscosity of the PP matrix increased with the addition of the hydrophilic nano‐silica. At shear rates between 50 and 200 s^?1, the composite displays marked shear‐thinning characteristics. However, the incorporation of LC5000 in the PP composite eliminated the shear‐thinning characteristic, which suggests that LC5000 destroyed the agglomerated nano‐silica network in the PP matrix. Although the viscosity ratio of LCP/PP was reduced after the addition of nano‐silica fillers, the LCP phases existed as droplets and ellipsoids. The nano‐silicas were concentrated in the LC5000 phase, which hindered the formation of LCP fibers when processed at high shear deformation. We carried out surface modification of the hydrophilic nano‐silica to investigate the effect of modified nano‐silica (M‐silica) on the morphology of the PP/LC5000 blend system. Ethanol was successfully grafted onto the nano‐silica surface with a controlled grafting ratio. The viscosity was reduced for PP filled with ethanol‐M‐silica when compared to the system filled with untreated hydrophilic nano‐silica. The LC5000 in the (PP/M‐silica)/LC5000 blend existed mainly in the form of fibrils. At high shear rates (e.g., 3000 s^?1), the LC5000 fibril network was formed at the skin region of the extrudates. The exclusion of nano‐silica in the LC5000 phase and the increased viscosity of the matrix were responsible for the morphological changes of the LCP phase. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1484–1492, 2003     

Self-assembly of C60 containing poly(methyl methacrylate) in ethyl acetate/decalin mixtures solvent

[60]Fullerene (C₆₀) was mono-substituted with well-defined poly(methyl methacrylate) (PMMA-b-C₆₀) using the atom transfer radical polymerization (ATRP) technique. The self-assembly behaviors of PMMA-b-C₆₀ in ethyl acetate (EA) and decalin mixtures were studied using laser light scattering (LLS) and transmission electron microscopy (TEM). Homogeneous solutions of PMMA-b-C₆₀ can be obtained in the solvent mixtures containing more than 40 wt% EA, where the molar ratio of decalin to EA is close to 1. For each solvent mixture, unimers coexist with micelles and large aggregates. The sizes of PMMA-b-C₆₀ micelles and aggregates are independent of polymer concentration, confirming that they are produced via the closed association mechanism. For the various solvent mixtures, the weight-averaged molecular weights, M_w of the PMMA-b-C₆₀ aggregates range from 4.1×10⁷ to 12.5×10⁷ g/mol. The hydrodynamic radii of the large aggregate, R_h, vary from 90 to 136 nm, while the z-averaged radii of gyration, R_g, range from 210 to 311 nm. The R_g/R_h value for each solvent mixture is ∼2.3, which is independent of decalin contents in the mixed solvents. The morphological study using the transmission electron microscope suggests that the large aggregates are composed of porous large compound micelles (LCM) in solution.     

蜂窝式构件长细比的计算方法

为了进一步研究蜂窝构件稳定承载性能,以现有长细比计算理论为基础,结合蜂窝构件的受力机理和界面特性,提出了蜂窝构件长细比计算中相关参数的计算方法．同时,结合理论推导和数值分析结果,提出了蜂窝构件换算长细比建议计算公式．