Heat transport and void fraction in granulated debris

The paper discusses the boiling heat transfer from a porous bed with internal heat sources and refers to the configuration in a nuclear reactor after a partial core melt. The flow of coolant, the temperature and the local liquid/vapor distribution were investigated in a two-dimensional configuration. Experiments were conducted using monodisperse beds as well as a mixture of two different particle sizes with a total porosity below 20%. In some tests the bed was supported by a shell of porous material to create a gap along the bottom of the test container. Water was used for tests up to 9% of the critical pressure, while other tests were made with R134a up to 44% of the critical pressure. The maximum heating rate realized inductively was 730 kW/m². The experiments have been compared to analytical results with a one-dimensional approach.It is shown that in contrary to the situation in small cylindrical configurations the heat transfer was increased by large buoyancy driven convective flows. If there was a gap along the container bottom an additional flow of liquid improved the coolability of the bottom region even if the upper part of the particle bed was already overheated. In case of high density ratios (water at low pressure), the measurements indicated a strong enhancement of the coolant flow above a certain minimum heating rate resulting in decreasing vapor fraction values which were nearly independent of the system pressure. This was assumed to be caused by the appearance of vertical channels through which the vapor could flow through the particle bed.     

Alternative fatty food simulants for migration testing of polymeric food contact materials.

The amounts of substances migrating from plastics into foodstuffs with high fat contents are in most cases higher than in foodstuffs with water contents. This increase in migration commonly is due to the higher solubility of the migrating organic compounds in fat compared to water. The increase in migration is not necessarily due to an increase in the substance's diffusion coefficient due to interactions between the fat and the plastic as is often assumed. Ethanol is a good simulant for fatty foods because it has little interaction with many plastics, e.g. polyolefins, migrants are readily soluble in it, and because it is easy to work with analytically. The utilizable limits of ethanol and ethanol/water mixtures as food simulants are developed from the physical background of diffusion. The use of ethanol and ethanol/water mixtures is supported by published experimental migration results.     

DIFFUSION LAG TIME FOR MULTIPLE AND PERIODIC LAMINATES

The permeability and lag time for a heterogeneous diffusion system, in which the diffusivity and partition coefficient for the diffusant are dependent on position, are formulated in terms of a linear asymptotic analysis. A repeated integration of the diffusion equation is used to obtain the time dependence of the total solute release into the receiver, Q(t). The asymptotic form of Q(t) is linear in time. The slope, and intercept of this linear asymptote with the time axis, respectively, give formulas for the steady-state permeability and lag time. These formulas are then applied to diffusion systems of multiple laminates, consisting of a series of different homogeneous slabs. Thus, for the first time, a concise treatment of diffusion in multiple laminates is obtained. The formulas are also applied to periodic laminates, consisting of a series of identical slabs, but with position-dependent diffusivity and partition coefficient. We found that the lag time can be well approximated by (nh))²/(6D_eff), where n and h are, respectively, the number and thickness of individual lamella, and D_eff is an effective diffusivity, for which a relation in terms of the local property distributions is obtained. This approximation becomes more accurate with increasing number of lamellae. At n = 5, the relative error is already within 4%. Finally a procedure is discussed for readily obtaining the lag time for periodic structures consisting of a serial repetition of a multi-laminate.     

Space-charge-limited currents for organic solar cells optimisation

Basic suppositions and microphysical origin of the occurrence of the space-charge-limited currents (SCLC) are presented in general and for the temperature-modulated space-charge-limited currents (TM-SCLC) in particular. The criteria are given for the spectroscopical method TM-SCLC to be used for localized electron states elucidation in organic semiconducting materials for organic solar cells optimization and modelling. The “visibility “of the localized states by SCLC method, i.e. the power of the SCLC method to distinguish the localized states, is tested by the modelling, varying the temperature, energy position of localized states and their concentration. Generally, it was determined that the SCLC measurements results are more reliable with the increased energy of the states, with their increased concentration and with decreased temperature. The correlation (or its absence) between the measured current and activation energy on applied voltage, expressed by the dependence of preexponential factor of conductivity on activation energy (Meyer–Neldel rule), gives the possibility to determine the energy range where the reconstruction of density of localized states function is reliable.     

Buchbesprechungen

Ohne Zusammenfassung     

Prevention of marital distress: Results of a German prospective longitudinal study.

This article reports on the development and long-term evaluation of a marital distress prevention program for German couples, the Ein Partnerschaftliches Lernprogramm (EPL, A Couple's Learning Program). The EPL is a 6-session program designed to teach couples effective communication and problem-solving skills. In the current article, the EPL is evaluated in a prospective, quasi-experimental, controlled trial. The results of the 3-year follow-up are reported, contrasting 55 EPL couples with a control group of 17 couples. Significant differences emerged with regard to the couples' dissolution rates, relationship satisfaction, and positive and negative communication behavior favoring the EPL couples. These results demonstrate the utility of the EPL program in assisting happy couples who are preparing for marriage. The implications of the findings for prevention research and for the dissemination of prevention programs are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)