Energy Efficiency of an Indirect Thermally Coupled Distillation Sequence

Several thermally coupled distillation sequences have been proposed to improve the thermal inefficiency of conventional distillation sequences. Particularly, for the separation of ternary mixtures, structures that perform a lateral extraction in one of the columns of the integrated arrangement have been shown to provide significant energy savings. The structure of existing sequences, based on conventional distillation columns, might provide the basis for alternate thermally coupled designs. In this paper, it is shown how a thermally coupled system derived from an indirect conventional sequence can provide energy savings through a proper optimization of the interconnecting streams.     

On the robust control of stable minimum phase plants with large uncertainty in a time constant. A fractional-order control approach

This paper addresses the problem of designing controllers that are robust to a great uncertainty in a time constant of the plant. Plants must be represented by minimum phase rational transfer functions of an arbitrary order. The design specifications are: (1) a phase margin for the nominal plant, (2) a gain crossover frequency for the nominal plant, (3) zero steady state error to step commands, and (4) a constant phase margin for all the possible values of the time constant (T$T$): 0<T<∞$0<T<\infty$. We propose a theorem that defines the structure of the set of controllers that fulfil these specifications and show that it is necessary for these robust controllers to include a fractional-order PI$PI$ term. Examples are developed for both stable and unstable plants, and the results are compared with a standard PI$PI$ controller and a robust controller designed using the QFT$QFT$ methodology.     

Raw data extraction from electrocardiograms with Portable Document Format

During the last two decades there has been a thorough research and development of standards and protocols in order to cope with different electrocardiogram formats from heterogeneous acquisition systems. Despite the efforts of public and private consortiums on creating a standardized electrocardiogram (ECG) storage format, there is still not a single one. Indeed, there is also the necessity of access to raw data of the ECGs previously acquired. Most of these documents have been saved as Adobe PDF files, since for medical staff it is an easy format for later visualization. However, this format presents difficulties when trying to access original raw data for subsequent studies and signal analysis. In this manner, this paper presents an application that obtains plain numerical data from ECG files stored with PDF format. Data can also be exported to one of the most common file formats in existence, to be easily accessed thereafter.     

Effect of the nature and structure of pillared clays in the catalytic behaviour of supported manganese oxide

In the present work, the complete oxidation of acetone has been studied over a series of supported manganese oxide catalysts on the unpillared and the Al- and Zr-pillared forms of two natural clays, a montmorillonite and a saponite. A significant influence of the clay supports characteristics on the catalytic performance has been found. The following order of improving catalytic performance is established with respect to the pillars composition: Al-pillared clays < unpillared clays < Zr-pillared clays.     

Design,dynamic modelling and experimental validation of a 2DOF flexible antenna sensor

A two-degree-of-freedom flexible antenna sensor platform was designed to physically simulate the ability of a robotic arm, which rapidly reorients and targets itself towards specific surfaces from different approachable angles. An accurate antenna model involves non-linear expressions that represent the system dynamics. Therefore, a comprehensive study along with experimental work has been carried out in order to achieve accurate system identification and validate the dynamic model. The model developed has proven useful in controlling the antenna tip, minimising the effects of the non-linear flexural dynamics and the Coulomb friction. The system was driven by servo motors. Algebraic controllers were developed for the antenna tip to track the reference trajectory. The platform system used encoders to measure the joint angles and a loadcell sensor to obtain the flexible link tip position. To validate the sensory information, the results obtained by the integrated sensors were compared to that of an external camera system.     

Study of Ozonated Sunflower Oil Using 1H NMR and Microbiological Analysis

Prior studies have proven that ozonated vegetable oils present a high germicidal power. Ozonation of sunflower oil at different applied ozone dosage was carried out and peroxide and aldehydes indices along with antimicrobial activity were determined. The reaction products were identified using Proton Nuclear Magnetic Resonance Spectroscopy (¹H NMR). The principal signals intensity values were used for following the reaction course between ozone and sunflower oil. The reaction was following up to peroxide index values of 1202 mmol-equi/kg. The intensities of olefinic proton signals decreased with the gradual increase in ozone concentration but without disappearing completely. The Criegee ozonides obtained at 107.1 mg/g of ozone doses were approximately 3.9-fold higher than that at beginning of the reaction. The aldehyde protons were observed as a weak intensity signal in all the spectra. The signals belonging to olefinic protons from hydroperoxides appeared weak and increased with the increase in ozone doses. Signals from other oxygenated groups were assigned. The highest action spectrum of antimicrobial activity was obtained with the higher peroxide index. It was concluded that at higher applied ozone doses, the higher the antimicrobial activity potential of ozonized sunflower oil     

Effect of annealing on the permeation characteristics of gases of coextruded LLDPE films

The temperature dependence of both the permeability and diffusion coefficients of carbon dioxide, oxygen and nitrogen in annealed LLDPE films are studied. It is found that the values of the permeability coefficient through the annealed membranes are nearly four times larger than those through the non-annealed ones. The fact that annealing slightly diminishes the values of the diffusion coefficient leads to the conclusion that the rise in permeability detected in the films by effect of annealing should be attributed to an increase in solubility. The permeability characteristics of the films are interpreted in terms of the free volume theory.     

A Taxonomy-Based Usability Study of an Intelligent Speed Adaptation Device

Usability studies are often based on ad hoc definitions of usability. These studies can be difficult to generalize, they might have a steep learning curve, and there is always the danger of being inconsistent with the concept of usability as defined in standards and the literature. This alternative approach involves comprehensive, general-purpose, and hierarchically structured taxonomies that follow closely the main usability literature. These taxonomies are then instantiated for a specific product. To illustrate this approach, a usability study for a prototype of an Intelligent Speed Adaptation device is described. The usability study consists of usability requirements analysis, heuristic evaluation, and subjective analysis, which helped identify problems of clarity, operability, robustness, safety, and aesthetics. As a context-specific usability taxonomy for this particular field of application happened to exist, the way that real-world usability results can be mapped to that taxonomy compared to the taxonomy in this article is examined, with the argument that this study’s taxonomy is more complete and generalizable.     

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system

Invariant three- and four-phase equilibria in the magnesium-rich corner of the Mg-Cu-Sn ternary system have been studied by differential thermal analysis, optical microscopy, electron probe microanalysis and X-ray diffraction. The L(Mg) + Mg₂ Cu + Mg₂Sn ternary eutectic reaction was found to be at 467 °C and at Mg–13.5 at % Cu–4.4 at% Sn. The LMg₂Cu + Mg₂Sn pseudo-binary eutectic reaction is tentatively located at 522°C and at Mg–26.0 at % Cu–7.7 at % Sn.     

An approach to reduce energy consumption and performance losses on heterogeneous servers using power capping

Journal of Scheduling - Rapid growth of demand for remote computational power, along with high energy costs and infrastructure limits, has led to treating power usage as a primary constraint in...