Pre-exposure embrittlement and stress corrosion failure in AlZnMg Alloys

It has been found that a high purity Al-6%Zn-3%Mg becomes embrittled if pre-exposed to moist gases prior to tensile testing. The degree of embrittlement increases with the time of preexposure and with the temperature and relative humidity of the pre-exposure environment. The alloy is most sensitive to embrittlement when solution treated at 475°C but this sensitivity can be reduced considerably if the surface film formed at 475°C is removed by electropolishing. The embrittlement is not strain-rate sensitive and the ductility of the pre-exposed alloy cannot be recovered by storing unstressed in dry air or in vacuo. However, the ductility of embrittled specimens can be fully restored if tensile testing is carried out under vacuum. If 1.7% copper or 0.14% chromium are added to the high purity alloy the rate of embrittlement is reduced and is even more reduced in the commercial 7075 alloy. Also, both the chromium containing alloy and the commercial alloy recover their ductilities during storage in laboratory air at room temperature—the rate of recovery being much higher than the rate of embrittlement.It is proposed that embrittlement is due to the deep penetration of an agent such as atomic hydrogen which reduces the grain boundary cohesion. It is also proposed that a similar effect must occur during the intergranular stress corrosion failure of AlZnMg alloys.     

Efficient least squares finite elements for two-dimensional laminar boundary layer analysis

This paper presents the formulations of essentially one-dimensional least squares and Galerkin-least squares finite elements for the numerical solution of two-dimensional laminar boundary layer equations. An iterative technique to cope with the non-linearity of the boundary layer equations, in conjunction with the least squares finite element method, is proposed. Through exhaustive numerical investigations in the retarded flow over a plate, flow past a circular cylinder, the flow past an elliptic cylinder, the accuracy and applicability of the proposed method are demonstrated.     

In situ transmission electron microscopy studies and real-time digital imaging

A newly designed CCD camera has been utilized for real-time and static image acquisitions. The performance of the camera is demonstrated for heating/cooling in-situ TEM experiments performed on a commercial high strength aluminium alloy using a double tilt heating holder. The real-time digital imaging capability of the new camera should facilitate the in-situ TEM that is now re-establishing itself as a strategic tool for materials characterization.     

Neganov–Luke Phonon Amplification in P-type Point Contact Detectors

The Cryogenic Dark Matter Search (CDMS) detectors measure ionization and athermal phonons in high purity germanium crystals to discriminate between nuclear recoils from dark matter candidates and radioactive backgrounds. In order to reach lower energy detection thresholds, the CDMSlite experiment operates the CDMS detectors with a larger voltage bias to increase the signal-to-noise ratio using the Neganov–Luke effect. Breakdown in those detectors was observed at fields of order 30 V/cm, but the reason for the breakdown is unknown. It is unclear if the breakdowns are due to surface leakage current, impact ionization in the bulk of the crystals, or some other effect due to the very low operating temperatures of the detectors. Germanium detectors used in gamma spectroscopy at 77 K are regularly operated with fields in excess of 1,000 V/cm. In order to understand the origin of breakdown in the CDMS detectors, a P-type Point Contact detector was equipped with transition edge phonon thermistors and operated at a base temperature of \(\sim \) 30 mK. The linearity of the Neganov–Luke phonon amplification was studied and no sign of breakdown for biases up to 400 V was observed. This excludes impact ionization on neutral impurity states as the primary cause of the breakdown observed in the CDMSLite detectors. This demonstrates that the Neganov–Luke phonon amplification is a viable method for lowering the energy threshold in germanium detectors of masses of order 1 kg.     

Material testing in a linear theta pinch

The interaction of stainless steel 316 and Inconel 625 alloys has been investigated with a thermonuclear-like plasma, n = 10¹⁶cm^?3 and T_i = 1 keV, generated in the Alvand I linear theta pinch. The average power flux is 10⁷ W/cm² and the interaction time nearly one μs. A theoretical analysis based on the formation of an observed impurity layer near the material, has been used to determine the properties of the impurity layer and the extent of the damage on the material. Although arcing has been observed, the dominant damage mechanism has been assessed to be due to evaporation. Exposure to single shots has produced very heavily defective areas and even surface cracks on the SS 316 sample, but no cracks were observed on Inconel 625 after exposure to even 18 shots. On the basis of temperature rise and evaporation a comparison is made among materials exposed to plasmas of a theta pinch, shock tube, present generation tokamak and an anticipated tokamak reactor.     

Image coding with geometric wavelets.

This paper describes a new and efficient method for low bit-rate image coding which is based on recent development in the theory of multivariate nonlinear piecewise polynomial approximation. It combines a binary space partition scheme with geometric wavelet (GW) tree approximation so as to efficiently capture curve singularities and provide a sparse representation of the image. The GW method successfully competes with state-of-the-art wavelet methods such as the EZW, SPIHT, and EBCOT algorithms. We report a gain of about 0.4 dB over the SPIHT and EBCOT algorithms at the bit-rate 0.0625 bits-per-pixels (bpp). It also outperforms other recent methods that are based on "sparse geometric representation." For example, we report a gain of 0.27 dB over the Bandelets algorithm at 0.1 bpp. Although the algorithm is computationally intensive, its time complexity can be significantely reduced by collecting a "global" GW n-term approximation to the image from a collection of GW trees, each constructed separately over tiles of the image.     

A Survey on Media Independent Handover (MIH) and IP Multimedia Subsystem (IMS) in Heterogeneous Wireless Networks

One challenge of wireless networks integration is to provide ubiquitous wireless access abilities and seamless handover for mobile communication devices between different types of technologies (3GPP and non-3GPP), such as Global System for Mobile Communication, Wireless Fidelity, Worldwide Interoperability for Microwave Access, Universal Mobile Telecommunications System and Long Term Evolution. This challenge is critical as mobile users are becoming increasingly demanding for services regardless of the technological complexities associated with them. To fulfil these requirements for seamless vertical handover (VHO) two main interworking frameworks have been proposed by IEEE Group and 3GPP for integration between the aforementioned technologies; namely, Media Independent Handover IEEE 802.21 and IP Multimedia Subsystem, where each of them requires mobility management protocol to complement its work, such as Mobile IP and Session Initiation Protocol, respectively. Various VHO approaches have been proposed in the literature based on these frameworks. In this paper, we survey the VHO approaches proposed in the literature and classify them into four categories based on these frameworks for which we present their objectives and performances issues.     

Characterization of the repeat-tract instability and mutator phenotypes conferred by a Tn3 insertion in RFC1, the large subunit of the yeast clamp loader

The RFC1 gene encodes the large subunit of the yeast clamp loader (RFC) that is a component of eukaryotic DNA polymerase holoenzymes. We identified a mutant allele of RFC1 (rfc1::Tn3) from a large collection of Saccharomyces cerevisiae mutants that were inviable when present in a rad52 null mutation background. Analysis of rfc1::Tn3 strains indicated that they displayed both a mutator and repeat-tract instability phenotype. Strains bearing this allele were characterized in combination with mismatch repair (msh2Delta, pms1Delta), double-strand break repair (rad52), and DNA replication (pol3-01, pol30-52, rth1Delta/rad27Delta) mutations in both forward mutation and repeat-tract instability assays. This analysis indicated that the rfc1::Tn3 allele displays synthetic lethality with pol30, pol3, and rad27 mutations. Measurement of forward mutation frequencies in msh2Delta rfc1:Tn3 and pms1Delta rfc1:Tn3 strains indicated that the rfc1::Tn3 mutant displayed a mutation frequency that appeared nearly multiplicative with the mutation frequency exhibited by mismatch-repair mutants. In repeat-tract instability assays, however, the rfc1::Tn3 mutant displayed a tract instability phenotype that appeared epistatic to the phenotype displayed by mismatch-repair mutants. From these data we propose that defects in clamp loader function result in DNA replication errors, a subset of which are acted upon by the mismatch-repair system.     

A toroidal approximation of capillary forces in polydisperse granular assemblies

In this paper we propose a numerical procedure for the prediction of capillary forces in polydisperse granular assemblies at a degree of moisture content that corresponds to the so-called pendular regime. The capillary force model is adopted within the Laplace–Young framework with a toroidal approximation of the liquid bridge geometry. Governing equations are first derived in a form that highlights the role of intrinsic parameters such as inter-particle separation distance, ratio of particle radii and liquid volume. A proper scaling of these equations is adopted so that the solution applies to any particle pair configuration. Numerical integration algorithms are provided in a way that facilitates implementations in macroscopic procedures for computer simulations. A qualitative evaluation is undertaken to highlight model predictions of the effects on capillary force of various intrinsic parameters that characterise the particle pair and liquid bridge. The model is validated against the experimental results provided by Willet et al. (Langmuir 16:9396–9405, 2000) for a wide range of liquid volumes and particle-pair polydispersity.