The application of near-infrared (NIR) and Raman spectroscopy to detect adulteration of oil used in animal feed production

Basic vegetable blends (BVB’s) and soya oils, used in the animal feed industry, are sometimes adulterated with transformer and mineral oil as a means of illegally increasing profit. A set of BVB’s and soya oil samples adulterated with transformer oil and mineral oil were characterised using both NIRS and Raman spectroscopy. Applying chemometrics to the NIRS and Raman spectral data, very good calibration and prediction statistics were obtained for transformer and mineral oils. Using NIRS, R² values greater than 0.99 were obtained with corresponding values for root mean squared error of calibration and prediction (<0.57 and <0.55, respectively). Using Raman, R² values greater than 0.97 were obtained with the root mean squared error of calibration (<2.01) and prediction (<1.92) calculated. Furthermore, using a qualitative approach it was possible, using PCA, to discriminate between 100% soya and BVB. This study demonstrates that both NIRS and Raman technology can be successfully applied as rapid screening techniques for the detection of oil adulteration and fraud in the food and feed industry.     

Physiological age at harvest regulates the variability in postharvest ripening, sensory and nutritional characteristics of mango (Mangifera indica L.) cv. Coghshall due to growing conditions

BACKGROUND: Climacteric fruits are harvested at the green‐mature stage and ripen during their marketing cycle. However, growing conditions induce variability into the maturity stage of mangoes at harvest, with an impact on their final quality. Assuming that the physiological age can be correctly evaluated by a criterion based on the variable chlorophyll fluorescence of the skin (F_v) and that differences in physiological age depend on growing conditions, controlled stress experiments were carried out on mango fruit by manipulating either the leaf/fruit ratio or the light environment. RESULTS: Delays from 9 to 30 days were observed, depending on stress level and harvest stage, to obtain the same F_v value. For moderate stress, fruit composition after ripening was partially compensated for, with little or no difference in sugar, dry matter, carotenoid and aroma contents. For more pronounced stress, the major metabolites were not particularly affected, but the synthesis capacity of carotenoids and aromas was lower after maturity. CONCLUSION: The ripening ability of a fruit is acquired on the tree and defines its postharvest changes. Control of the physiological age at harvest can minimise the variability observed under natural conditions and guarantee fruit batches whose postharvest changes will be relatively homogeneous. Copyright © 2011 Society of Chemical Industry     

Hydrogen production from formic acid decomposition at room temperature using a Ag-Pd core-shell nanocatalyst

Formic acid (HCOOH) has great potential as an in situ source of hydrogen for fuel cells, because it offers high energy density, is non-toxic and can be safely handled in aqueous solution. So far, there has been a lack of solid catalysts that are sufficiently active and/or selective for hydrogen production from formic acid at room temperature. Here, we report that Ag nanoparticles coated with a thin layer of Pd atoms can significantly enhance the production of H? from formic acid at ambient temperature. Atom probe tomography confirmed that the nanoparticles have a core-shell configuration, with the shell containing between 1 and 10 layers of Pd atoms. The Pd shell contains terrace sites and is electronically promoted by the Ag core, leading to significantly enhanced catalytic properties. Our nanocatalysts could be used in the development of micro polymer electrolyte membrane fuel cells for portable devices and could also be applied in the promotion of other catalytic reactions under mild conditions.     

Conductive-probe atomic force microscopy characterization of silicon nanowire

The electrical conduction properties of lateral and vertical silicon nanowires (SiNWs) were investigated using a conductive-probe atomic force microscopy (AFM). Horizontal SiNWs, which were synthesized by the in-plane solid-liquid-solid technique, are randomly deployed into an undoped hydrogenated amorphous silicon layer. Local current mapping shows that the wires have internal microstructures. The local current-voltage measurements on these horizontal wires reveal a power law behavior indicating several transport regimes based on space-charge limited conduction which can be assisted by traps in the high-bias regime (> 1 V). Vertical phosphorus-doped SiNWs were grown by chemical vapor deposition using a gold catalyst-driving vapor-liquid-solid process on higly n-type silicon substrates. The effect of phosphorus doping on the local contact resistance between the AFM tip and the SiNW was put in evidence, and the SiNWs resistivity was estimated.     

Processing and properties of transparent hydroxyapatite and β tricalcium phosphate obtained by HIP process

Stoichiometric β-tricalcium phosphate (β-TCP) and hydroxyapatite (HA) powders were synthesized by chemical precipitation of aqueous solutions of diammonium phosphate and calcium nitrate. After a calcination treatment and a milling step, the powders were shaped by slip casting. The sintering temperature effect on the relative density and the average grain size was investigated. By natural sintering at 1200 and 1120 °C, densities of 98% and 99% were obtained for HA and TCP, respectively. After determination of minimum temperatures to obtain only closed porosity and a pre-sintering at these temperatures, hot isostatic pressing (HIP) treatment was carried out. Transparent or translucent samples were obtained, indicating a relative density very close to the theoretical value (>99.9%). Mechanical properties (three-point bending strength, fracture toughness, Young's modulus and Vickers hardness) were measured on both materials with similar grain size (～ 1 μm). Bending strengths of 181 and 105 MPa were measured for TCP and HA, respectively.     

Attitudes toward Corporate Responsibilities in Western Europe and in Central and East Europe

• This study investigated the attitudes toward social, economic, and environmental corporate responsibilities of 3064 current managers and business students in 8 European countries.
• Participants in Western European countries had significantly different perspectives on the importance of these corporate responsibilities (CR) than those in Central and East European countries. Within each country, environmental CR is perceived as most important in both CEE and Western European countries. Across countries, Western European respondents accord more importance to social CR and less importance to economic CR. CEE countries are not homogenous, e.g., CR attitudes in the Czech Republic are closer to that of Western Europeans, possibly triggered by the accession to EU.
• Work experience (managers vs. business students) influences social and environmental orientations more than the economic orientation for only some countries. Generational differences were found as well: Business students attribute more importance to environmental CR and less importance to social CR than managers.

     

Kinetic and mechanistic investigations of progesterone reaction with ozone

The removal of progesterone by ozone in aqueous solution was studied in this work. The absolute rate constant was evaluated and first by-products were identified. The reaction was studied in the 2.0-8.0 pH range and was found to be a second-order reaction, first-order relative to each compound concentration. The rate constant, determined by kinetic experiments in presence of an OH radical scavenger (tert-butanol), was independent of pH. The value was evaluated to be equal to 480+/-30 M(-1)s(-1) by two kinetic methods. Mass spectrometry analyses were performed to investigate primary degradation products generated by the reaction of ozone with progesterone. Two by-products were evidenced. According to these results, a degradation pathway of progesterone reacting with ozone was proposed.     

Soy protein isolate nanocomposite film enriched with eugenol,an antimicrobial agent: Interactions and properties

Nanocomposites films were designed from soy protein isolates (SPI), clays (Na⁺‐MMT), and eugenol an antimicrobial agent. Interactions between Na⁺‐MMT and eugenol were evidenced by a shift of the d‐spacing by X‐ray diffraction analysis. The addition of Na⁺‐MMT (5 and 7.5% w/w) in SPI solution increased its shear thinning behavior and its consistency. Accordingly, a good exfoliation of clays in SPI films was observed. The glass transition temperature of SPI films was impacted by the clays addition but not the water vapor permeability. In contrast, the addition of eugenol in SPI solution did not affected the consistency but induced a decrease of the SPI film T_g and an increase of the water vapor permeability. The presence of eugenol counterbalanced the effect of clays on consistency of film‐forming solution. The clay intercalation process was facilitated and the water vapor permeability and active agent release were modified. The presence of clay did not affect the antibacterial effect of eugenol/SPI films. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45941.