Effects of electrospraying parameters on deposition of La0.3Sr0.7Fe0.7Cr0.3O3−δ cathode layer on GDC

High performance in intermediate temperature solid oxide fuel cells requires improvements especially in the microstructure of the cathode layer. New cobalt-free cathode materials are used because cobalt-containing cathodes have higher thermal expansion coefficients, poor long-term chemical stability, and lower mechanical stability. Recently cobalt-free cathodes have been proposed to solve these issues by using deposition methods other than electrospray deposition (ESD). In this study, ESD method is used to develop a cobalt-free cathode layer. The electrolyte layer is gadolinium-doped ceria that is deposited with La_0.3Sr_0.7Fe_0.7 Cr_0.3O_3−δ (LSFCr) prepared by 2-butoxyethanol and ethylene glycol solvents as opposed to conventional solvents. Experimental ESD parameters are tested at different levels and combinations by applying statistical experimental design methods to optimize the microstructure. Coating deposited as such demonstrated higher electrochemical performance than similar electrodes fabricated by other methods.     

Diffusion coefficients and phase equilibria of carbon dioxide–ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) system

This article presents the mutual diffusion coefficients of a carbon dioxide–ionic liquid, [bmim][PF₆], system at temperatures of 313.15 and 323.15 K and pressures of 5 and 8 MPa. In order to estimate the diffusion coefficients, we have carried out experiments to find time-dependent carbon dioxide solubilities in the ionic liquid and then fit a transport model to the data. In a system containing high pressure carbon dioxide and ionic liquid, carbon dioxide dissolves in the liquid until its equilibrium mole fraction is reached. During this process, the position of the liquid–vapour interface and the density of the liquid phase change. To account for the variation in liquid density, an equation fit to the experimental density data is included in the transport model. To track the moving interface, the volume-of-fluid method is used. The diffusivities at dilute concentration and at thermodynamic phase equilibrium are determined and compared with the literature values and those obtained from correlations.     

Prussian Blue-Based Flexible Thin Film Nanoarchitectonics for Non-enzymatic Electrochemical Glucose Sensor

Journal of Inorganic and Organometallic Polymers and Materials - A facile and non-enzymatic electrochemical sensor is developed by the simple electrodeposition of Prussian Blue (PB) on conductive...     

Amphiphilic Fullerene-BODIPY Photosensitizers for Targeted Photodynamic Therapy

Nanotheranostic tailor-made carriers are potent platforms for the treatment of cancer that propound a number of advantages over conventional agents for photodynamic therapy (PDT). Herein, four new heavy atom free amphiphilic glucose-BODIPY-fullerene dyads ( 14 – 17 ) endowed with carbohydrate units in the styryl units, which can also form nanomicelles ( 14 – 17NM) with Tween 80 for PDT are reported. Glucose-BODIPY-fullerene systems ( 14 – 17 ) and related nanomicelles ( 14 - 17NM ) have been prepared to emcee efficient singlet oxygen generation upon light irradiation. In vitro anti-tumor effects of the compounds 14 – 17 and 14 – 17NM in the presence of light and in darkness have been investigated with K562 human chronic myelogenous leukemia suspension cells. Anti-tumor toxicity upon light irradiation was due to the formation of singlet oxygen and reactive oxygen species (ROS). This study may provide an accomplished example of efficient PDT applications based on nanovehicles fabricated with universal spin converter, fullerene, light harvesting unit, BODIPY dyes conjugated with targeting units to fight against cancer.     

Nanomaterial interfaces designed with different biorecognition elements for biosensing of key foodborne pathogens

Foodborne diseases caused by pathogen bacteria are a serious problem toward the safety of human life in a worldwide. Conventional methods for pathogen bacteria detection have several handicaps, including trained personnel requirement, low sensitivity, laborious enrichment steps, low selectivity, and long-term experiments. There is a need for precise and rapid identification and detection of foodborne pathogens. Biosensors are a remarkable alternative for the detection of foodborne bacteria compared to conventional methods. In recent years, there are different strategies for the designing of specific and sensitive biosensors. Researchers activated to develop enhanced biosensors with different transducer and recognition elements. Thus, the aim of this study was to provide a topical and detailed review on aptamer, nanofiber, and metal organic framework–based biosensors for the detection of food pathogens. First, the conventional methods, type of biosensors, common transducer, and recognition element were systematically explained. Then, novel signal amplification materials and nanomaterials were introduced. Last, current shortcomings were emphasized, and future alternatives were discussed.     

Erlotinib-Modified BODIPY Photosensitizers for Targeted Photodynamic Therapy

Photodynamic therapy (PDT) is an innovative, non-invasive and highly selective therapeutic modality for tumours and non-malignant diseases. BODIPY based molecules can function as new generation photosensitizers (PSs) in various PDT applications. Despite numerous conjugated PS systems are available, BODIPYs containing erlotinib lagged behind other photosensitizer units. In this study, smart photosensitizers containing BODIPY, erlotinib and hydrophilic units were prepared for the first time, their physicochemical properties and PDT effects were investigated. Compared with non-halogenated compound, halogenated derivatives possessed much lower fluorescence profile as well as the good ROS generation ability under red light. In vitro PDT studies were performed on both healthy (PNT1a) and prostate cancerous cells (PC3) to determine the selectivity of the compounds on cancerous cells and their effects under light. The halogenated conjugates, exposed to low dose of light illumination exhibited potent activity on cancer cell viability and the calculated IC₅₀ values proved the high phototoxicity of the photosensitizers. It was also determined that the PSs have very low dark toxicity and that the light illumination and ROS formation are required for the initiation of the cell death mechanism. As a result, erlotinib modified BODIPYs could serve as promising agents in anticancer photodynamic therapy.     

Sol-Gel-Derived Ordered Mesoporous High Entropy Spinel Ferrites and Assessment of Their Photoelectrochemical and Electrocatalytic Water Splitting Performance

The novel material class of high entropy oxides with their unique and unexpected physicochemical properties is a candidate for energy applications. Herein, it is reported for the first time about the physico- and (photo-) electrochemical properties of ordered mesoporous (CoNiCuZnMg)Fe₂O₄ thin films synthesized by a soft-templating and dip-coating approach. The A-site high entropy ferrites (HEF) are composed of periodically ordered mesopores building a highly accessible inorganic nanoarchitecture with large specific surface areas. The mesoporous spinel HEF thin films are found to be phase-pure and crack-free on the meso- and macroscale. The formation of the spinel structure hosting six distinct cations is verified by X-ray-based characterization techniques. Photoelectron spectroscopy gives insight into the chemical state of the implemented transition metals supporting the structural characterization data. Applied as photoanode for photoelectrochemical water splitting, the HEFs are photostable over several hours but show only low photoconductivity owing to fast surface recombination, as evidenced by intensity-modulated photocurrent spectroscopy. When applied as oxygen evolution reaction electrocatalyst, the HEF thin films possess overpotentials of 420 mV at 10 mA cm⁻² in 1 m KOH. The results imply that the increase of the compositional disorder enhances the electronic transport properties, which are beneficial for both energy applications.     

A reinforcement learning approach for transaction scheduling in a shuttle-based storage and retrieval system

With recent Industry 4.0 developments, companies tend to automate their industries. Warehousing companies also take part in this trend. A shuttle-based storage and retrieval system (SBS/RS) is an automated storage and retrieval system technology experiencing recent drastic market growth. This technology is mostly utilized in large distribution centers processing mini-loads. With the recent increase in e-commerce practices, fast delivery requirements with low volume orders have increased. SBS/RS provides ultrahigh-speed load handling due to having an excess amount of shuttles in the system. However, not only the physical design of an automated warehousing technology but also the design of operational system policies would help with fast handling targets. In this work, in an effort to increase the performance of an SBS/RS, we apply a machine learning (ML) (i.e., Q-learning) approach on a newly proposed tier-to-tier SBS/RS design, redesigned from a traditional tier-captive SBS/RS. The novelty of this paper is twofold: First, we propose a novel SBS/RS design where shuttles can travel between tiers in the system; second, due to the complexity of operation of shuttles in that newly proposed design, we implement an ML-based algorithm for transaction selection in that system. The ML-based solution is compared with traditional scheduling approaches: first-in-first-out and shortest process time (i.e., travel) scheduling rules. The results indicate that in most cases, the Q-learning approach performs better than the two static scheduling approaches.     

A Novel Strategy as a Potential Rapid Therapy Modality in the Treatment of Corneal Ulcers: Fluconazole/Vancomycin Dual Drug-Loaded Nanofibrous Patches

Corneal ulcer, which is brought on by a breach in the epithelial barrier, is a dangerous infection of the avascular corneal stroma. New treatment strategies are needed, suppressing the aggressive nature of the disease and including a combination of different drugs. In this study, vancomycin (VAN) and fluconazole (FLU) dual-drug loaded dual-layered polyvinyl alcohol and gelatin (PVA/GEL) nanofibrous patches are produced by electrospinning. Scanning electron microscopy (SEM) images show smooth surfaces are obtained for both pure and drug-loaded nanofibrous patches. The tensile test results report that loading the FLU and VAN separately into the PVA/GEL patches decrease both the tensile strength and elongation at break and it is further reduced when combining two drug-loaded layers in one patch. According to drug release results, the FLU and VAN-loaded nanofibrous patches show a controlled release profile extending up to 96 h. Moreover, PVA/GEL/FLU, PVA/GEL/VAN, and PVA/GEL/FLU/VAN nanofibrous patches display significant antimicrobial activity against Candida albicans and Staphylococcus aureus. SEM, 4'-6diamidynofenyloindol (DAPI) staining, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay show that PVA/FLU and PVA/GEL/FLU/VAN nanofibrous patches have a superior effect on NIH3T3 cell spreading and proliferation. The novelty of this study lays in the development of a potential dual drug rapid treatment for corneal ulcers of aggressive nature.