Strain-Rate Sensitivity,Tension-Compression Asymmetry,r-Ratio,Twinning, and Texture Evolution of a Rolled Magnesium Alloy Mg-1.3Zn-0.4Ca-0.4Mn

Metallurgical and Materials Transactions A - In this work, the deformation response, texture evolution, and twinning development of a magnesium (Mg) alloy, Mg-1.3Zn-0.4Ca-0.4Mn, for biocompatible...     

Comparison of the Features of Electron Transport and Subterahertz Generation in Diodes Based on 6-, 18-, 70-, and 120-Period GaAs/AlAs Superlattices

Semiconductors - A comparison of the features of electron transport in diodes based on 6-, 18-, 30-, 70-, and 120-period GaAs/AlAs superlattices with a similar design is performed. However, the...     

Neural-fuzzy optimization of thick composites curing process

This article addresses the optimization of curing process for thick composite laminates. The proposed methodology aims at the evaluation of the thermal cycle promoting a desired evolution of the degree of cure inside the material. At the same time, temperature overshooting as well as excessive temperature and cure degree gradient through the thickness of the material are prevented. The developed approach is based on the integrated application of artificial neural networks and a fuzzy logic controller. The neural networks promptly predict the behavior of composite material during curing process, while the fuzzy logic controller continuously and opportunely adjusts the proper variations on the imposed thermal cycle. The results highlighted the efficiency of the method in comparison with the cure profiles dictated by the material suppliers. For thick laminates, a reduction of 35% of cure time and improvements of approximately 10% of temperature overshooting was obtained compared to conventional curing cycles. The method was validated by experimental tests.     

A note on observability tests for general polynomial and simple Wiener–Hammerstein systems

We propose an algorithm, based on symbolic computation packages, for testing observability conditions of general polynomial systems, which were formulated in Sontag, SIAM J. Control Optim. 17 (1979) 139–151. Computational complexity of the observability test can be reduced and the test simplified for classes of polynomial systems. We illustrate this by considering the class of simple Wiener–Hammerstein systems, which consist of a series of two linear dynamic blocks between which a static nonlinearity is “sandwiched”. We consider the case when the nonlinearity is a monomial . Simple necessary and sufficient conditions for observability are given and they resemble, but are subtly different from, the well known result on observability for the series connection of two linear systems.     

Novel approach for detection of IoT generated DDoS traffic

Wireless Networks - The problem of detecting anomalies in network traffic caused by the distributed denial of service (DDoS) attack so far has mainly been investigated in terms of detection of...     

New access modes of parallel memory subsystem for sub-pixel motion estimation

Accessing pixels in memory is a well-known bottleneck of SIMD (single instruction multiple data) processors in video/imaging. To tackle it, we propose new block and row access modes of parallel on-chip memory subsystem, which enable a higher processing throughput and lower energy consumption than the access modes of the state-of-the-art subsystems. The new access modes significantly reduce the number of on-chip memory accesses, and thereby accelerate one of key video/imaging kernels: sub-pixel block-matching motion estimation. The main idea is to exploit spatial overlaps of blocks/rows accessed for pixel interpolation, which are known at the subsystem design-time, and merge multiple accesses into a single one by accessing somewhat more pixels at a time than with other parallel memories. To avoid the need for a wider, and, therefore, more costly SIMD datapath, we propose new memory read operations that split all pixels accessed at a time into multiple SIMD-wide blocks/rows, in a convenient way for further processing. As a proof of concept, we describe a parametric, scalable, and cost-efficient architecture that supports the new access modes. The architecture is based on a previously proposed set of memory banks with multiple pixels per bank word, and a previously proposed shifted scheme for arranging pixels in the banks. We analytically and experimentally demonstrate advantages of this work on a case study of sub-pixel motion estimation for video frame-rate conversion. The implemented motion estimator processes 2160p video at 60 fps in real time, while clocked at 600 MHz. Compared to the implementations based on the state-of-the-art subsystems, this work enables 40–70 % higher throughput, consumes 17–44 % less energy and has similar silicon area and off-chip memory bandwidth costs. That is 1.8–2.9 times more efficient than the prior art, considering the throughput and all costs, i.e., consumption, area, and off-chip bandwidth. Such a higher efficiency is the result of the new access modes, which reduced the number of on-chip memory accesses by 1.6–2.1 times, and the cost-efficient architecture.     

Characteristics and Formation Mechanism of BaTiO3 Powders Prepared by Twin-Fluid and Ultrasonic Spray-Pyrolysis Methods

Spherical fine (micrometer and submicrometer in size) homogeneous BaTiO₃ powders were synthesized from ethanol: water solutions of BaCl₂ and TiCl₄ using the spray-pyrolysis technique. Two different atomizers—twin-fluid and ultrasonic, with a resonant frequency of 2.5 × 10⁶ Hz—were used for mist generation. Hollow spherical particles containing a certain amount of unreacted BaCl₂ phase and having a mean particle diameter of 2.5 μm were obtained at 1173 K using a twin-fluid atomizing system. Decomposition of precursors and their transition to the cubic BaTiO₃ phase occurred, even at 973 K in the case of the ultrasonic atomizing system. For the initial droplet size of 2.2 μm and residence time of ∼60 s, spherical BaTiO₃ particles with the mean particle diameter of 0.53 μm were obtained. A BaTiO₃ formation mechanism has been proposed as a reaction between TiO₂ and BaCl₂ rather than a reaction of oxides.     

Analysis of the influence of actuator model complexity on manipulator control synthesisAnalyse des einflusses der komplexität des modells von aktuatoren auf die synthese der manipulator-steuerung

The paper considers the influence of the complexity of the mathematical model of actuators on control synthesis and simulation of movements on a digital computer. It presents the results of the simulation of dynamics of two mechanical manipulation configurations powered by electromechanical and hydraulic actuators.     

Optimization of the superlattice parameters for THz diodes

Previously, GaAs/AlAs superlattices with a small active area (~1 μm²) were used by us to design mixer diodes. It was established that these superlattices can efficiently be used in the terahertz (THz) range. It was theoretically and experimentally shown that short-period (i.e., containing few periods) superlattices in the composition of harmonic mixers have significant advantages in comparison with multi-period (with 50–100 or more periods) superlattices at frequencies of up to 5.3 THz. In this study, the superlattice design is optimized and the operation efficiency of short-period superlattices is shown to be determined to a large extent by the transition regions located at the superlattice edges.