The effects of growth hormone in children with a GH deficiency: a report of 5 cases

The authors describe 5 cases, 3 boys and 2 girls, with idiopathic growth hormone deficiency in prepubertal age, treated with human growth hormone. In four of five cases the response to treatment with GH was relevant. Only in one case (F1) the response was negative. The results of this study confirm that rhGH is a safe and effective therapy in children with GHD.     

Photoelectrochemistry of poly(3-methylthiophene), I: Surface morphology and thickness effect

Photocyclovoltammetric experiments with films of poly(3-methylthiophene) under polychromatic light irradiation show a p-type semiconductor behavior in the reduced state, with a flat band potential of 0.18 V. The photocurrent depends on film thickness and surface morphology. Films with different thickness were characterized by scanning electron microscopy, indicating a globular morphology with globule sizes changing according to the charge density used during polymer deposition. The highest photocurrent is observed for the lowest globule diameter. These films were also irradiated with monochromatic light from the electrolyte side and from the substrate side. A higher photocurrent and a photocurrent spectrum matching the absorption spectrum of the reduced form of the polymer is observed on irradiation from the electrolyte side of a 0.7 μm thick film. In contrast, for irradiation from the electrode side, the photocurrent is lower and the spectrum shows a peak at lower energy. These results were interpreted in terms of a delocalized space charge zone, different kinetics for charge transfer and mass transport across the solvent swollen polymer film and different depth of penetration of the light as a function of wavelength.     

既有钢筋混凝土框架结构抗震加固若干问题探讨

针对钢筋混凝土框架结构抗震加固问题的复杂性 ,本文深入分析了抗震加固结构的受力特征 ,探讨了卸荷对加固构件承载力的影响 ,并针对抗震加固后的“隐含危险转移”问题提出了相应的对策。最后 ,提出了抗震加固的基本原则 ,可供结构抗震加固时参考     

A novel cyclic process using CaSO<Subscript>4</Subscript>/CaS pellets for converting sulfur dioxide to elemental sulfur without generating secondary pollutants: Part I. Feasibility and kinetics of the reduction of sulfur dioxide with calcium-sulfide pellets

Certain new sulfide-smelting processes and coal-gasification processes generate high-strength sulfur dioxide streams, for which a new process for converting sulfur dioxide to elemental sulfur needs to be developed because no process exists that is generally and economically applicable to the treatment of such streams. A thermodynamic and experimental investigation to develop a new process for converting sulfur dioxide to elemental sulfur by a cyclic process involving calcium sulfide and calcium sulfate without generating secondary pollutants was carried out. In this process, the starting raw material, calcium sulfate, is reduced by a suitable reducing agent, such as hydrogen, to produce calcium sulfide, which is used to reduce sulfur dioxide to elemental sulfur vapor and calcium sulfate. The latter is, in turn, reduced to regenerate calcium sulfide. In this Part I, detailed experimental results are presented on the kinetics of the reaction between sulfur dioxide and calcium-sulfide pellets, which produces elemental sulfur and calcium sulfate. The experiments were carried out at temperatures between 1023 and 1088 K and sulfur-dioxide partial pressures between 9 and 60 kPa by the use of a thermogravimetric analysis (TGA) technique. The rate of this reaction was demonstrated by the conversion of 40 pct calcium-sulfide pellets obtained from the hydrogen reduction of fresh calcium sulfate in 10 minutes at 1073 K under a sulfur-dioxide partial pressure of 43 kPa. The reactivity decreased somewhat during the first three cycles but remained largely unchanged thereafter up to the tenth cycle. This characteristic of the pellets is important because the solids must be reusable for repeated cycles to avoid generating secondary pollutants. A pore-blocking model was found to fit the reaction rate. The reaction is first order with respect to sulfur-dioxide partial pressure and has an activation energy of 101 to 134 kJ/mol (24 to 32 kcal/mol) for calcium-sulfide pellets reacted and regenerated several different times. Sulfur dioxide-containing streams from certain sources, such as the regenerator off-gas from an integrated-gasification, combined-cycle, desulfurization unit and new sulfide-smelting plants, contain much higher partial pressures of SO₂. In these cases, the rate of the first reaction is expected to be proportionally higher than in the test conditions reported in this article. The reduction kinetics of calcium-sulfate pellets with hydrogen gas is reported in the accompanying Part II.     

SAAB雷达与PROVOX系统的通讯

介绍了SAAB雷达液位计和SAAB雷达系统与上位系统的通讯接口FSC以及PROVOX系统的智能设备接口卡 (IDI)等的基本内容 ,并对SAAB雷达液位计与PROVOX系统通讯的硬件连接和PROVOX系统中关于IDI卡的组态方法进行说明     

Microbiological denitrification of red beet juice

The purpose of study was the determination of optimal conditions for red beet juice denitrification by Paracoccus denitrificans bacteria as well as the evaluation of the usefulness of microbiologically treated juice for the production of a natural colouring preparation for foods. Total reduction of nitrates was found during bacterial culturing at 25 and 30 °C, at an initial pH of 7.0-8.0 and juice osmotic pressure of 900-1100 mOsm/kg. Microbiological denitrification procedure affected colour, taste and aroma of the juice. However, the use of juice as food colouring and component was made feasible by acidification and partial evaporation of water together with volatile substances.     

Suspension force and mechanism of debris flows

The paper discusses the postulated suspension force, by which it is possible to explain some enigmatic phenomena observed in different types of mass movements. This force is generated in thick suspensions as a result of friction between sinking solid particles and static water. The suspension force is related to the seepage force but they have opposite directions. Both forces form flow networks. Having explained the suspension force, the paper describes how this influences the movement of material, particularly in debris flows. Enigmatic features and the mechanism of debris flows and lahars are explained by virtue of the suspension force. Electronic Publication     

电子束和接触式曝光机的混合曝光技术

Ⅰ线光致抗蚀剂可以同时实用电子束和光学系统曝光，在50kV加速电压下，其曝光剂量为50-100μC/cm^2，曝光后在0.7%NaOH溶液内显影1分钟。其灵敏度比PMMA快5倍，分辩率为0.5μm。采用两方法制备CaAsPHEMT：一种用Ⅰ线光致抗蚀剂，对源、漏及栅全部都采用电子束曝光，制备了0.5μm栅长的GaAs PHEMT；另一种将源、漏及栅分割成两部分，其中精细部分由电子束曝光，其余部分由光学系统曝光，用这种方法制备了0.25μm栅长的GaAs PHEMT。Ⅰ