聚合物基金属梯度复合材料的制备与结构研究

本文通过石墨阴极溶液涂膜法制得甲基丙烯酸-丙烯酸共聚物[P(MMA-co-MAA)]与环氧乙烷(PEO)的共混聚合物,并以其为基质制备了聚合物基铜金属复合膜(CPCFs).在这一过程中,对所得溶胀阴极膜(SCF)进行半干燥处理后,用电化学方法使其还原以得最终产物.实验研究表明:(1)低P(MMA-co-MAA)含量会增强SCF的离子电导率;(2)还原反应中酸性环境会增强电导性;(3)水-乙醇共溶剂有助于增强电导率.偏光显微镜测试显示:poly(MMA-co-MAA)会影响PEO的结晶.X-射线衍射实验也证实了还原铜金属单质的存在.     

基于无线收发数传模块PTR2030的温度测控系统设计

PTR2030是超小型、超低功耗、高速率的无线数传MODEM模块。它性能优异，是目前低功率无线数传应用方面的理想器件。文中介绍了PTR2030的主要特点、引脚功能、软件设计、硬件连接方法及具体应用电路。     

多孔硅发光二极管的载流子传输特性研究

制备AI／多孔硅／c-Si／Al结构的多孔硅发光二极管，利用其I-V特性关系，以及在不同温度下其I-V特性的变化，结合多孔硅的特殊微结构及性质，分析了多孔硅发光二极管中载流子的产生和传输过程；通过比较其发光猝灭前后I-V特性的变化，解释了发光猝灭的原因。提出了如果在低电场下能够实现大量载流子在限制性Si微粒中复合．是提高多孔硅电致发光效率的一个途径。     

ZL101合金锶变质效果及热处理工艺的改进

对现场生产的ZLl01合金铸件材质进行了全面分析，针对存在的产品成分不准，变质效果不好，力学性能不合格的问题，通过改进合金的锶变质工艺和热处理工艺，改善了合金的组织和性能，达到了对材料的成分、性能的各项要求。     

Plasma Sprayed Hydroxyapatite Coatings with Nano-hydroxyapatite Prepared by Ultrasonic Precipitation Process

Nano-particle hydroxyapatite （ HA ） was prepared with a novel ultrasonic precipitation process and the as-prepared nanopowder was used to produce hydroxyapatite （ HA ） coatings on titanium substrate via plasma spraying. The phase and the microstructare of the coating were characterized by X- ray diffraction （XRD） and scanning electron microscopy （SEM）. Results showed that spherical particles could be prepared by ultrasonic precipitation process; and a corresponding dense HA coating with molten surface and low-porosity cross-section structure was acquired. During the plasma spraying process, new phases of Ca3 （ PO4 ）2 and Ca2 P2O7 were generated. After heat-treating at 800℃ for 1 h, the contents of Ca3 （ PO4 ）2 and Ca2 P2O7 decreased while HA content increased. Tensile adhesion tests showed that the plasma sprayed coating prepared with the spherical nanoparticles exhibited high tensile bond strength.     

东江水库诱发地震探讨

阐述了东江水库基本情况，通过对库区及周围的地质构造特点、诱发地震监测，总结出东江水库地震的活动特征和诱发地震活动趋势。     

Fractal Nature of Crack Growth under Different Temperature

We have studied numerically a simple crack growth model in a two-dimensional triangular lattice of bonds and nodes which incorporates the sudece of a growing crack bond-breaking probability Pi~ exp{(-Vi+Ei)φ(T)}, where Ei is elastic eneny stored in the i-th bond. Different energy temperature factors φ(T) are employed during crack formation and propagation process with a uniform dilation strain case and a shear case and with periodic boundary condition in the horizontal direction. Our results show that the patterns of the cracks generated are fractal structure and the effective fractal dimensionalities decrease with the increase of the temperature factor φ(T)(the absolute temperature T decreasing). In the paper we also discuss the relation between the effective fractal dimension Deff (the radius Rg Of gyration) and the fractal dimensions D (the radius R of circular), and also give their modification values Ω about two kinds of methods in the lattice model     

海水介质中高活性镁合金负极的电化学性能

研制了一种新型镁合金负极材料；用电化学方法测定了镁合金负极在人造海水介质中的电化学性能，用浸泡法测定了材料在人造海水介质中的自腐蚀速度，用扫描电子显微镜观察了镁合金腐蚀后的表面形貌，并与AP65合金和纯镁进行了比较。结果表明，新研制的镁合金在人造海水介质中的开路电位增加，自腐蚀速度降低，稳定工作电位提高，电极表面腐蚀均匀，可开发用于高电性能电池的负极材料。     

TN-S系统接地方式中重复接地的探讨

通过对TN S系统接地方式中重复接地的探讨 ,介绍了重复接地对N线和PE线的不同作用 ,明确了TN S系统接地方式中重复接地的设计和施工方法。     

就拉杆固定支架谈锻件的缺陷分析

针对汽车锻件拉杆固定支架在生产过程中产生的裂纹、折叠、表面脱碳等多种形式缺陷,从锻件生产工艺过程的各工序来分析其可能产生的缺陷,并重点就裂纹、折叠、表面脱碳等缺陷产生的原因及其解决方法进行探讨,从而进一步完善生产工艺,改善锻件质量.