Influence of nitrogen addition on the microstructure and mechanical properties of duplex stainless steel weld metals

Duplex stainless steels find extensive applications in off‐shore, paper/pulp, refineries and petrochemical industries owing to their excellent combination of properties. Because of the thermal cycle experienced during the manufacturing/processing operations like welding, the weldment developed in this material is generally inferior in properties (mechanical and corrosion) when compared to the base material. The problem is more severe when the welding is done in the autogenous condition. The current work correlates the microstructure and property of UNS 31803 duplex stainless steel (material no. 1.4462) welded by autogenous GTA process with and without nitrogen in the shielding gas. It has been found that the nitrogen addition to the weld metal through the shielding gas mixture not only helps in achieving the proper phase balance but also improves the impact toughness of the resultant weld metal.     

Drying of hot chilli using solar tunnel drier

A mixed mode type forced convection solar tunnel drier was used to dry hot red and green chillies under the tropical weather conditions of Bangladesh. The drier consisted of transparent plastic covered flat-plate collector and a drying tunnel connected in series to supply hot air directly into the drying tunnel using two fans operated by a photovoltaic module. The drier had a loading capacity of 80 kg of fresh chillies. Moisture content of red chilli was reduced from 2.85 to 0.05 kg kg⁻¹ (db) in 20 h in solar tunnel drier and it took 32 h to reduce the moisture content to 0.09 and 0.40 kg kg⁻¹ (db) in improved and conventional sun drying methods, respectively. In case of green chilli, about 0.06 kg kg⁻¹ (db) moisture content was obtained from an initial moisture content of 7.6 kg kg⁻¹ (db) in 22 h in solar tunnel drier and 35 h to reach the moisture content to 0.10 and 0.70 kg kg⁻¹ (db) in improved and conventional sun drying methods, respectively. The use of a solar tunnel drier and blanching of sample led to a considerable reduction in drying time and dried products of better quality in terms of colour and pungency in comparison to products dried under the sun. The solar tunnel drier and blanching of chilli are recommended for drying of both red and green chillies.     

Modelling of electrical energy recovery from urban solid waste system: The case of Dhaka city

This paper presents a system dynamics computer model to predict population growth, solid waste production, electricity generation from solid waste and percentage of total electricity demand supplied from the solid waste of Dhaka, Bangladesh. Simulated solid waste generation in Dhaka agrees well with values reported by the Dhaka City Corporation. Simulated results show that population, solid waste generation and electricity generation potential from solid waste all increase with time, but percentage of total electricity demand supplied from solid waste decreases with time. However, MSW could still supply a significant portion of the electricity demand of Dhaka. Adoption of policy for electricity recovery from urban solid waste should be dictated by the economic adoption of the technology for electricity generation from the waste and the environmental implications. The model can be used for analysing electrical energy recovery from urban solid waste management.     

Thin layer solar drying of rough rice

This paper presents a set of simple empirical equations for natural air flow solar drying of rough rice in mixed-mode type dryer, box-type dryer and open floor drying system. The moisture contents predicted by the equations were in good agreement with the observed values. The effect of drying air temperature on the drying rate constants for these three cases were found to be insignificant. The equilibrium moisture content appeared to be the most important variable controlling the drying rate. The highest drying rate was observed in case of mixed-mode dryer. The drying rate of box dryer was next to that of mixed-mode dryer. This study shows that the introduction of solar dryer for drying of rough rice is highly recommendable in Bangladesh.     

Cycles in wavelength routed optical networks

Signals in wavelength routed optical networks can oscillate in closed cycles resulting in adverse effects on network operation. In particular, amplified spontaneous emission from erbium doped fiber amplifiers can form recirculating loops that lead to amplifier saturation and oscillations. Searching, enumerating and eliminating these closed cycles becomes a problem that the network designer must address. A variety of cross-connect technologies are studied and shown to result in oscillating cycles in the network. Topological and technological approaches based on Eulerian network theory and other methods are proposed to eliminate these cycle problems     

Performance analysis of the minimum variance beamformer in thepresence of steering vector errors

We present an analysis of the signal-to-interference-plus-noise ratio (SINR) at the output of the minimum variance beamformer in the presence of steering vector errors. The analysis yields an explicit expression for the SINR in terms of the variance of the steering vector errors and the other parameters affecting performance, including signal-to-noise ratio (SNR), interference-to-noise ratio (INR), signal-to-interference ratio (SIR), angular separation between desired signal and interference, array size and shape, correlation between desired signal and interference, and finite sample size     

Microwave Heated Chemical Vapor Infiltration: Densification Mechanism of SiCf/SiC Composites

Silicon carbide fiber-reinforced silicon carbide matrix composites (SiC_f/SiC) have been produced using microwave heated chemical vapor infiltration. Preferential densification of the composite from the inside out was clearly observed. Although an average relative density of only 55% was achieved in 24 h, representative of an ∼26% increase over the initial fiber vol%, the center of the preform densified to 73% of the theoretical. The densification mechanisms were investigated using X-ray absorptiometry and scanning electron microscopy. The initial inverse temperature profile obtained, which was found to result in the efficient filling of the intratow porosity, although not the intertow porosity, flattened out after approximately 6 h as the densification front moved outward toward the edges. Although not investigated directly, the evidence suggested that this was caused by changes in both the thermal conductivity and microwave absorption characteristics as the samples densified.