Constructing porous ZnO/SnO2 nanocomposites for the detection of methane at low operating temperature

Journal of Porous Materials - Aimed at detecting methane (CH4) gas at low operating temperature, porous ZnO/SnO2 nanocomposites were constructed through a simple two-step method. Pure SnO2 with a...     

Biological effects of casein-derived tripeptide powders are not affected by fermentation process

Milk casein-derived biologically active tripeptides isoleucine–proline–proline and valine–proline–proline have shown antihypertensive effects both in animal and clinical studies. Contradictory findings from clinical intervention studies may be related to different manufacturing processes. The present study aimed to compare cardiovascular effects of two different tripeptide powders in spontaneously hypertensive rat (SHR). Rats received tripeptide powders produced either by Lactobacillus helveticus fermentation (A) or Lb. helveticus plus proline specific endoprotease (B) in drinking fluid for 8 weeks. Systolic blood pressure was recorded weekly. At the end, blood and tissue samples were collected and arterial responses studied. Blood pressure was 13.6 and 14.2 mmHg lower in the groups A and B, respectively, versus the water group (P < 0.01). Vascular responses of aorta and mesenteric artery did not differ between the groups. Both tripeptide products increased urinary cGMP (P < 0.001) and decreased albumin (P < 0.05). The fermentation process did not influence the cardiovascular effects of the tripeptide powders.     

Age-related differences in emotion recognition ability: A cross-sectional study.

Experimental studies indicate that recognition of emotions, particularly negative emotions, decreases with age. However, there is no consensus at which age the decrease in emotion recognition begins, how selective this is to negative emotions, and whether this applies to both facial and vocal expression. In the current cross-sectional study, 607 participants ranging in age from 18 to 84 years (mean age = 32.6 ± 14.9 years) were asked to recognize emotions expressed either facially or vocally. In general, older participants were found to be less accurate at recognizing emotions, with the most distinctive age difference pertaining to a certain group of negative emotions. Both modalities revealed an age-related decline in the recognition of sadness and—to a lesser degree—anger, starting at about 30 years of age. Although age-related differences in the recognition of expression of emotion were not mediated by personality traits, 2 of the Big 5 traits, openness and conscientiousness, made an independent contribution to emotion-recognition performance. Implications of age-related differences in facial and vocal emotion expression and early onset of the selective decrease in emotion recognition are discussed in terms of previous findings and relevant theoretical models. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Performance of cold sprayed Ni‐20Cr and Ni‐50Cr coatings on SA 516 steel in actual industrial environment of a coal fired boiler

Power plants are one of the major industries suffering from severe erosion–corrosion (E‐C) problems resulting in substantial losses. One way of tackling this problem is by the use of thermal spray coatings. In the current investigation a new emerging technique i.e. cold spray coating process was used to deposit Ni‐20Cr and Ni‐50Cr powder on SA 516 (grade 70) boiler steel. The bare as well as the coated steels were subjected to cyclic experimental studies, in the superheater zone of a coal fired boiler. Weight change, thickness loss, XRD, FE‐SEM/EDS and X‐ray mapping techniques were used to analyse the eroded‐corroded specimens. The uncoated steel showed weight gain after exposure in the actual boiler environment, whereas, for the coated steels there was initial weight loss followed by negligible weight change. Based upon thickness loss data the cold‐sprayed Ni‐50Cr coating was found to provide better E‐C resistance than the Ni‐20Cr coating.     

TrkB Receptor Signalling: Implications in Neurodegenerative,Psychiatric and Proliferative Disorders

The Trk family of receptors play a wide variety of roles in physiological and disease processes in both neuronal and non-neuronal tissues. Amongst these the TrkB receptor in particular has attracted major attention due to its critical role in signalling for brain derived neurotrophic factor (BDNF), neurotrophin-3 (NT3) and neurotrophin-4 (NT4). TrkB signalling is indispensable for the survival, development and synaptic plasticity of several subtypes of neurons in the nervous system. Substantial evidence has emerged over the last decade about the involvement of aberrant TrkB signalling and its compromise in various neuropsychiatric and degenerative conditions. Unusual changes in TrkB signalling pathway have also been observed and implicated in a range of cancers. Variations in TrkB pathway have been observed in obesity and hyperphagia related disorders as well. Both BDNF and TrkB have been shown to play critical roles in the survival of retinal ganglion cells in the retina. The ability to specifically modulate TrkB signalling can be critical in various pathological scenarios associated with this pathway. In this review, we discuss the mechanisms underlying TrkB signalling, disease implications and explore plausible ameliorative or preventive approaches.     

Morphological controlled synthesis of micro-/nano-polyaniline

A novel, highly efficient and economical route is developed for the synthesis of polyaniline micro-/nanostructure. Materials were characterized by a complementary combination of X-ray diffraction, Scanning electron microscopy, Fourier-transform infrared, and UV-visible spectrophotometer. Morphology of polyaniline can be tailored by varying the structure-directing agents and pH of the synthesis condition. Ethylene glycol and polyethylene glycol formed a three-dimensional flower-like structure whereas block-copolymer (ethylene oxide and propylene oxide based co-polymer EO₂₀PO₇₀EO₂₀) formed leaf-like structure when the synthesis was performed at pH 7. Using these structure-directing agents, nanorod and granular morphologies were obtained when the samples were synthesized at pH 3 and 1, respectively.     

Influence of elevated temperatures on physical and compressive strength properties of concrete containing palm oil fuel ash

The residual compressive strength of concrete containing palm oil fuel ash (POFA) after exposure to elevated temperatures and subsequent cooling was investigated. Specimens from ordinary Portland cement (OPC) and POFA concrete mixes were prepared and subjected to various temperature levels. The POFA concrete contains 20% partial replacement of cement by weight and the temperature levels are; 100, 300, 500 and 800 °C. Two cooling systems which include cooling at room temperature by the natural breeze and water-spray were involved. Compressive strength test was conducted on control specimens as well as concrete specimens revived through the two cooling systems. Physical properties accompanying thermal degradations were also assessed. Residual performance as a ratio of residual strength to original strength was evaluated. The residual performance was found to be higher in POFA concrete than in the normal concrete. In addition, water-cooling was realized to aggravate strength reduction in both normal and POFA concretes when compared with air-cooling. High temperature and cooling system were also found to have great influence on physical properties, such as; mass loss, discolouration and crack patterns.     

The effect of the shape and size of the pores on the mechanical properties of porous HAP-based bioceramics

In this study, the influence of the shape and size of the pores on the mechanical properties of the obtained porous HAP-based bioceramics was investigated. The porous HAP-based bioceramics were obtained starting from spherical calcium hydroxyapatite powder, obtained by hydrothermal syntheses. The number of shapeless inter-agglomerate pores decreased and amount of spherical intra-agglomerate pores increased on increasing the sintering temperature from 1100 °C to 1250 °C. The shape of pores also changed with thermal treatment of specimens; the small pores remained spherical while the larger pores became more spherical in shape, as was proved by image analysis. A three-dimensional, finite element unit cell model was applied to evaluate the influence of pore shape on the mechanical strength of HAP ceramics. By analyzing the effect of the shape of pores to the fracture toughness of sintered porous HAP bioceramics, it was observed that the more spherical the pores were, the tougher became the bioceramics. After sintering at 1250 °C for 2 h, measured toughness was 1.31 MPa m^1/2, which is a relatively high value for this type of bioceramics.     

Stable SOI micromachined electrostatic AC voltage reference

We have designed and manufactured a micromachined moving plate capacitor to be used as an AC voltage reference in electrical metrology. The reference is based on the characteristic AC current–voltage curve of the component having a maximum, the value of which ideally depends only on the geometry of the component and material properties of single crystalline silicon. The electrode surface stability is essential in this application and hence a new fabrication process has been developed to metallize both surfaces of an electrostatically actuated micromachined structure. The stability of the AC reference voltage at a frequency of 100 kHz and an RMS voltage value 6.4 V was measured to be ±60 ppm over 14 h.     

Effect of phosphine on acid corrosion of iron

The effect of the phosphine-concentration (10^?8–10^?3 M) in strong acid solutions (pH = 0) on the corrosion rate of pure iron and Fe- 0.12% P alloy has been investigated. It was shown that at low concentrations (10^?7–10^?6M), phosphine accelerates the corrosion of iron, whereas at adequately high concentrations (10^?5–10^?3 M) it has inhibitory properties. In the presence of PH₃ the cathodic reduction of hydrogen ions is strongly accelerated. At the same time, the increase in PH₃ concentration causes an increase of surface coverage by PH₃ molecules, which results in the inhibition of both partial electrode processes.