Mechanical properties of virgin and recycled polyolefin‐based composite laminates reinforced with jute fabric

Polyolefin‐based composite laminates reinforced with jute fabric were prepared by compression molding and investigated in terms of flexural properties and impact behavior. The use of a virgin polypropylene as the matrix was compared with two polyolefin matrices coming from discarded car bumpers and selected packaging wastes, respectively, and mainly constituted by mixtures of polyethylene and polypropylene resins. The influence of a coupling agent (maleated polypropylene) was always considered in order to improve the interfacial adhesion and, consequently, the composite strength. The effect of this coupling agent, clearly dependent on the amount of polypropylene phase in the overall mixture, was found to be satisfactory only in the case of virgin polypropylene‐based systems. These latter, in presence of maleated polypropylene, have shown higher flexural parameters, lower propagation energy and higher breaking impact load with respect to uncompatibilized ones. Results were supported by morphological observations of impact surfaces, always highlighting a poor adhesion at the reinforcement–matrix interface except in compatibilized virgin polypropylene‐based laminates. POLYM. COMPOS., 36:2022–2029, 2015. © 2014 Society of Plastics Engineer     

Scaling up effects of Mg hydride in a temperature and pressure-controlled hydrogen storage device

A research program addressed to evaluate the magnesium hydride storage scaling up effects is being developed by CESI RICERCA, Milano, and the Hydrogen Group of Padova University. A storage device containing 500 g of magnesium hydride powder (manufactured by Venezia Tecnologie S.p.A. using high-energy ball milling) has been designed and tested in different operating conditions. A number of absorption and desorption cycles at different temperatures and pressures has been carried out in order to see if the results are comparable with laboratory data obtained on small amounts (fractions of grams) of powder samples. A sensible performance degradation that reduced the overall storage capacity of about 50% has been noticed after 20 cycles, presumably due to local powder heating, fragmentation and subsequent compaction. Further tests on a smaller tank equipped also with a porous baffle gave useful indications for the design of an improved large hydrogen reservoir.     

β-Cyclodextrin Inclusion Complex to Improve Physicochemical Properties of Pipemidic Acid: Characterization and Bioactivity Evaluation

The aptitude of cyclodextrins (CDs) to form host-guest complexes has prompted an increase in the development of new drug formulations. In this study, the inclusion complexes of pipemidic acid (HPPA), a therapeutic agent for urinary tract infections, with native β-CD were prepared in solid state by kneading method and confirmed by FT-IR and ¹H NMR. The inclusion complex formation was also characterized in aqueous solution at different pH via UV-Vis titration and phase solubility studies obtaining the stability constant. The 1:1 stoichiometry was established by a Job plot and the inclusion mechanism was clarified using docking experiments. Finally, the antibacterial activity of HPPA and its inclusion complex was tested on P. aeruginosa, E. coli and S. aureus to determine the respective EC_50s and EC_90s. The results showed that the antibacterial activity of HPPA:β-CD against E. coli and S. aureus is higher than that of HPPA. Furthermore, HPPA and HPPA:β-CD, tested on human hepatoblastoma HepG2 and MCF-7 cell lines by MTT assay, exhibited, for the first time, antitumor activities, and the complex revealed a higher activity than that of HPPA. The use of β-CD allows an increase in the aqueous solubility of the drug, its bioavailability and then its bioactivity.     

Genetic nearest feature plane

The problem addressed in this paper concerns the complexity reduction of the nearest feature plane classifier, so that it may be applied also in dataset where the training set contains many patterns. This classifier considers, to classify a test pattern, the subspaces created by each combination of three training patterns. The main problem is that in dataset of high cardinality this method is unfeasible.A genetic algorithm is here used for dividing the training patterns in several clusters which centroids are used to build the feature planes used to classify the test set.The performance improvement with respect to other nearest neighbor based classifiers is validated through experiments with several benchmark datasets.     

F-substituted hydroxyapatite nanopowders: Thermal stability,sintering behaviour and mechanical properties

Fluorine-substituted hydroxyapatites are considered promising materials for bone scaffolding. In this study a systematic investigation on F-half substituted hydroxyapatite (F-HAp, Ca₁₀(PO₄)₆OHF) obtained by precipitation is reported. Results on composition analysis, thermal behaviour, and sinterability are presented for a comparison with the respective pure hydroxyapatite. Samples were characterised by electron microscopy, induced coupled plasma-atomic emission spectroscopy, thermal analysis, infrared spectroscopy, N₂ adsorption measurements, X-ray diffraction and dilatometry. A semicrystalline F-substituted hydroxyapatite powder made up of needle-like nanoparticles was obtained. Notwithstanding that it was thermally stable up to 1300 °C, it was sintered at relatively low temperatures obtaining a very fine microstructure with a relevant nano-porosity, beneficial in view of cell adhesion and in-growth.Hardness, elastic modulus and toughness of produced samples were investigated by Vickers–Knoop microhardness testing. Significant improvements of the mechanical properties were observed for the F-substituted hydroxyapatite, in comparison with pure hydroxyapatite.     

Tunable frequency-selective surfaces for beam-steering applications

First results from a study on tunable frequency-selective surfaces (FSSs) used for beam-steering applications are reported. In particular, the scattering response of a multilayer passband FSS based on varactorloaded rectangular slots has been investigated. Simulated and measured results show that tunable FSSs can be employed to locally control the phase of the transmitted field with limited amplitude losses.     

Formulation optimisation of vegetable flour–loaded functional bread. Part II: effect of the flour hydration on the bread quality

In this work, the hydration process of durum wheat–based functional bread loaded with yellow pepper flour was optimised. In particular, the investigated vegetable flour and durum wheat semolina were mixed after they were separately hydrated. Three different amounts of water added to the yellow pepper flour were studied for assessing the effect of vegetable flour hydration level on the dough development and overall quality of bread. The bread formulation investigated in a previous work, based on 25% of yellow pepper and 2% of guar seed as structuring agent where the vegetable flour was directly added to the hydrated durum wheat semolina dough, was chosen as control sample. Results highlighted that dough samples with yellow pepper flour hydrated at highest water content showed a rheological behaviour similar to the durum wheat dough. Moreover, creep analysis showed that the sample added with no‐hydrated yellow pepper flour recorded the greatest resistance to deformation. Same results were obtained for the dough tensile and bread compression tests. The use of the hydrated yellow pepper flour also improved all sensorial attributes.     

Persistent organic pollutants in farmed European sea bass (Dicentrarchus labrax,Linnaeus, 1758) from Sicily (Italy)

Farmed European sea bass (Dicentrarchus labrax, Linnaeus, 1758) were collected during 2016 from one Sicilian fish farm that uses two different rearing systems – sea cage and concrete tank – for determination of polychlorinated biphenyls (PCB), organochlorine pesticides (OCP) and polycyclic aromatic hydrocarbons (PAH) residues by HRGC-MS/MS. Moreover, commercial feed was analysed. This study aimed to determine whether the different rearing systems affect the concentration of these compounds, and to assess the safety of cultured fish. PCBs represent the pollutants with the highest concentration; in particular, PCB138 and 153 have the highest concentration in almost all samples. Among OCPs, only 4,4′-DDE, 4,4′-DDD and 4,4′-DDT residues have been detected. Concerning PAHs, only fluorene and phenanthrene were detected, in both rearing systems. Although some residues of organic pollutants were found in the analysed samples, they were always below the MRLs, so the results suggest that farmed sea bass are safe for human consumption.     

Non-Coding RNAs in Muscle Dystrophies

ncRNAs are the most recently identified class of regulatory RNAs with vital functions in gene expression regulation and cell development. Among the variety of roles they play, their involvement in human diseases has opened new avenues of research towards the discovery and development of novel therapeutic approaches. Important data come from the field of hereditary muscle dystrophies, like Duchenne muscle dystrophy and Myotonic dystrophies, rare diseases affecting 1 in 7000–15,000 newborns and is characterized by severe to mild muscle weakness associated with cardiac involvement. Novel therapeutic approaches are now ongoing for these diseases, also based on splicing modulation. In this review we provide an overview about ncRNAs and their behavior in muscular dystrophy and explore their links with diagnosis, prognosis and treatments, highlighting the role of regulatory RNAs in these pathologies.