Buchbesprechungen

Ohne Zusammenfassung     

Retention of Escherichia coli in municipal sewage by means of planted soil filters in two-stage pilot plant systems.

Different types of constructed wetlands in a pilot-plant system were fed with identical municipal waste water to compare the sanitisation process in two-stage systems. With combinations of a vertical and a horizontal flow filter an E. coli reduction of 5 log10 with an E. coli influent concentration of 10(7) MPN/100 ml was achieved. Using different filter materials in each stage the total performance of the two-stage system was independent from the sequence of these materials. However, using coarser filter material in the first stage makes the filter less prone to clogging and is thus the preferential option with regard to operational reliability.     

Optimal design of elastic beams with segmentwise constant height in the case of dynamic loading

A shape optimization method for elastic beams with segmentwise constant height is proposed. The ends of the beam are simply supported, clamped or free. Two problems are discussed; (i) a beam is loaded by lateral pressure, (ii) a beam is struck by an attached mass. External loads and volume of the beam are prescribed and the deflection in a given cross-section is to be minimized. For solving this problem, the deflections are expanded into a Fourier series by eigenfunctions. Numerical results are given for two-, three- and four-stepped beams.     

Preparation and Characterization of Novel Polyimides from 2,6-bis[1-(p-dimethylaminophenylimino)ethyl] pyridine for the Selective Extraction of some Metals

Summary A group of new polyimides has been prepared by solution condensation of 2,6-bis[1-(p-dimethylaminophenylimino)ethyl] pyridine containing pendant NMe₂ units and various dianhyrides in N-methylpyrrolidone (NMP). The tridentate (N-N′-N) pydim ligands were prepared by Schiff-base condensation of 2,6-diacetylpyridine and 4-dimethylaminoaniline in the presence of formic acid as catalyst. These polymers were investigated for their extraction capabilities for Zn(II), Mn(II), Cu(II), Cd (II) and Ni(II) and at different pH. Under different conditions enhanced selectivity was observed. Up to 98% quantitative recoveries were observed for all metals.     

“Ärztliche Freiheit und Berufsethos“ — Hängen ärztliche Berufsfreiheit und ärztliches Berufsethos zusammen?

Ohne Zusammenfassung     

Production of maraging steel grades and the influence of specified and nonspecified elements for special applications

The material properties of maraging steels are greatly affected by the alloy and inclusion content and hence by the production route. This paper describes various past and current production routes at Böhler Edelstahl GmbH and the effect of these routes on the specified element (alloy) and non-specified element (inclusion) contents. Non-metallic inclusions were investigated by EDX analysis. The effects of various alloying and tramp elements on the material properties are presented as a statistical evaluation of previous melts. Nitrogen solubility was calculated with Thermo–Calc for maraging steel Mat.-No. 1.6354 and the precipitation of nitrides is discussed. A proposal is made for the production of melts with improved properties.     

Phase relations in the ternary system Cu-In-Se

The phase relations of the ternary system Cu-In-Se were studied at 750° C by quenching experiments. Special attention was given to the region CuInSe₂In₂Se₃-In₄Se₃. Only four ternary phases with extended homogeneity ranges were found to exist. They were characterized by X-ray powder diffraction, electron microprobe analysis (EK8PA)' end optical microscopy. Differential thermal analysis (DTA) investigations allowed us to construct theT-x diagram of the Cu₂Se-In₂Se₃. out between 47 and 100 mol% In₂Se₃. Besides, it was also possible to give a tentative diagram of the solid-liquid equilibria at 750° C and to get some information on the sub-solid existence fields beside the Cu₂Se-In₂Se₃ cut.     

Linear demosaicing inspired by the human visual system.

There is an analogy between single-chip color cameras and the human visual system in that these two systems acquire only one limited wavelength sensitivity band per spatial location. We have exploited this analogy, defining a model that characterizes a one-color per spatial position image as a coding into luminance and chrominance of the corresponding three colors per spatial position image. Luminance is defined with full spatial resolution while chrominance contains subsampled opponent colors. Moreover, luminance and chrominance follow a particular arrangement in the Fourier domain, allowing for demosaicing by spatial frequency filtering. This model shows that visual artifacts after demosaicing are due to aliasing between luminance and chrominance and could be solved using a preprocessing filter. This approach also gives new insights for the representation of single-color per spatial location images and enables formal and controllable procedures to design demosaicing algorithms that perform well compared to concurrent approaches, as demonstrated by experiments.     

Diffraction coefficients related to cylindrically curved soft-hard surfaces

An asymptotic solution to the problem of the diffraction of high-frequency waves by the edge of a cylindrically curved surface whose convex and concave faces present soft and hard boundary conditions is obtained. The results permit us to define new diffraction coefficients related to this kind of mixed boundary conditions. When the radius of the curvature becomes infinitely large, the edgediffraction coefficient reduces to this known for the softhard half-plane.