Visceral Adipose Tissue Displays Unique Metabolomic Fingerprints in Obesity,Pre-Diabetes and Type 2 Diabetes

Visceral adipose tissue (VAT) metabolic profiling harbors the potential to disentangle molecular changes underlying obesity-related dysglycemia. In this study, the VAT exometabolome of subjects with obesity and different glycemic statuses are analyzed. The subjects (n = 19) are divided into groups according to body mass index and glycemic status: subjects with obesity and euglycemia (Ob+NGT, n = 5), subjects with obesity and pre-diabetes (Ob+Pre-T2D, n = 5), subjects with obesity and type 2 diabetes under metformin treatment (Ob+T2D, n = 5) and subjects without obesity and with euglycemia (Non-Ob, n = 4), used as controls. VATs are incubated in culture media and extracellular metabolite content is determined by proton nuclear magnetic resonance (¹H-NMR). Glucose consumption is not different between the groups. Pyruvate and pyroglutamate consumption are significantly lower in all groups of subjects with obesity compared to Non-Ob, and significantly lower in Ob+Pre-T2D as compared to Ob+NGT. In contrast, isoleucine consumption is significantly higher in all groups of subjects with obesity, particularly in Ob+Pre-T2D, compared to Non-Ob. Acetate production is also significantly lower in Ob+Pre-T2D compared to Non-Ob. In sum, the VAT metabolic fingerprint is associated with pre-diabetes and characterized by higher isoleucine consumption, accompanied by lower acetate production and pyruvate and pyroglutamate consumption. We propose that glucose metabolism follows different fates within the VAT, depending on the individuals’ health status.     

Catalytic wet air oxidation of olive mill wastewater

Au-based catalysts, known for ambient temperature CO oxidation, have to provide stable performance of up to 5000 h in order to be commercially applicable in automotive fuel cells. In this report, the on-line deactivation characteristics of Au/TiO₂ in unconventional PROX conditions are discussed. As opposed to CO removal from air, results in this report suggests that carbonates have a minor effect on deactivation of Au/TiO₂ in dry H₂-rich conditions. Also, no conclusive correlation between surface hydration and deactivation was observed. Rather, deactivation appeared to have occurred as a result of an intrinsic transformation in the oxidation state of the active species in the reducing operating conditions; a process which was reversible in an oxidizing atmosphere.     

Hepatic damage produced by long-term alcohol consumption in well-nourished rats

A study of the effect of long-term alcohol consumption on the liver of well-nourished rats is described. Rats fed for 16 weeks on a semipurified diet supplemented with high levels of vitamins and lipotropic factors and alcohol corresponding to 35% of the total caloric intake developed marked fatty changes of the liver. Mild fatty changes were observed in pair-fed controls receiving as isoenergetic equivalent of sucrose instead of alcohol. Intracellular hyaline bodies, corresponding ultrastructurally to giant mitochondria were abundantly found in the hepatocytes of alcoholic rats, while in the controls they were not seen. Te findings in this investigation are postulated to provide further evidence that the long-term intake of alcohol exerts a direct causative role in the pathogenesis of liver damage.     

Analytical ray tracing system: Introducing art, a C-library designed for seismic applications

Ray tracing technique is an important tool not only to forward but also for inverse problems in Geophysics, which most of the seismic processing steps depend on. However, implementing ray tracing codes can be very time consuming. This article presents a computer library to trace rays in 2.5D media composed by a stack of layers. The velocity profile inside each layer is such that the eikonal equation can be analytically solved. Therefore, the ray tracing within such profile is made fast and accurate. The great advantage of an analytical ray tracing library is the numerical precision of the quantities computed and the fast execution of the implemented codes. Even though ray tracing programs exist for a long time, for example the seis88 package by ?ervený, most of those programs use a numerical approach to compute the ray. Regardless of the fact that numerical methods can solve more general problems, the analytical ones could be part of a more sophisticated simulation process, where the ray tracing time is completely relevant. We demonstrate the feasibility of our codes using several examples (Miqueles et al., 2013)  [1]. The library can also be used for other applications besides seismic, e.g., optics and tomography.     

Engineering plastics from lignin. XVI. Starlike macromers with propylene oxide

Starlike macromers were prepared from hydroxypropyl organosolv lignin by reaction with propylene oxide, and they were analyzed by a combination of conventional analysis techniques. The average number of arms per macromer was controlled by partial capping with an alkoxy group; and the average length of arms by the degree of chain extension with propylene oxide. Analysis methods included treatment with hydriodic acid followed by gas chromatographic separation of alkyl iodides (HI/GC), UV spectroscopy, H-NMR spectroscopy, and thermal analysis. The results were consistent with a hypothetical pentameric model structure having between two and six radiating arms, each with a length of between 1 and 4 propylene oxide units. The UV method was best qualified to determine degree of chain extension, while HI/GC was best suited for analyzing average number of arms per macromer fragment. The synthesis and analysis of starlike macromers from lignin is viewed as an important stepping stone for the formulation of lignin-based engineering plastics and multiphase materials.     

A generalized electromagnetic theory for the mass spectrum of neutrinos

In previous papers it was shown that solutions of Weyl equation that are eigenstates of the parity operator describe a coupled pair of a monopole anti-monopole system. These results suggest to seek a solution of the Maxwell equation $\partial F^\infty = - g\mathcal{J}$ with a current $\mathcal{J}$ as a source and such that the Lorentz force on the current is null. We first identify a solution where $J_m = - \gamma ^5 \mathcal{J}$ is a spacelike field. More surprisingly we find that there exists a solution F of the free Maxwell ? F = 0 that is equivalent to the inhomogeneous equation for F ^∞. Once this result is proved, it suggests by itself to seek more general (subluminal and even superluminal) solutions $\mathfrak{F}$ of the free Maxwell equation equivalent to an inhomogeneous Maxwell equation for a field $\mathfrak{F}_0$ with a current term as a source which may be a timelike or spacelike field. We exhibit one such subluminal solution, for which the Dirac-Hestenes spinor field ψ associated with the electromagnetic field $\mathfrak{F}_0$ satisfies a Dirac-like equation for a bradyonic neutrino under the ansatz that the current is $ce^{\lambda \gamma ^5 } g\psi \gamma ^0 \tilde \psi$ with g the quantum of magnetic charge and λ a constant to be determined in such a way that the auto-force is zero. Together with Dirac’s quantization condition this gives a quantized mass spectrum (Eq. (46)) for neutrinos, with masses of the different flavor neutrinos being of the same order of magnitude (Eq. (47)), which is in accord with recent experimental findings.     

Comparative analysis of methods for determining the metabolic rate in order to provide a balance between man and the environment

The incorrect determination of metabolic rate can be linked to discrepancies between the model of the PMV (Predicted Mean Vote) and real thermal sensation collected in field studies. Aiming to improve the correlation of the PMV model and the real thermal sensation, this work established new values for the metabolic rate: one way being called “calculated” using Newton's Method and the other called "measured" using a metabolic analyzer. Welder's activities were evaluated, through the measurements of environmental and personal variables. New values of metabolic rate were determined for this activity. The values found for the calculated form and the measured one were, respectively, 178.63 and 145.46 W/m², different from the range provided by the table of ISO 8996 (2004) for this activity (75–125 W/m²). In order to verify which of the values of the metabolic rate was closer to the real thermal sensation of PMV, a linear regression was made between the PMV and the real thermal sensation in three ways: S × PMV_tabulated (R² = 0.1749), S × PMV_calculated (R ² = 0.7481) and S × PMV_measured (R² = 0.7854). It was found that the values measured by the instrument gave a higher coefficient of determination which was chosen for the correction of the table. The correction of the table provides a value of M_predicted, that is a value of metabolic rate that corrects the values provided by the tables of ISO 8996 (2004), by means of a correction coefficient. For the welder's activities in a metal-mechanics industry, tabulated values can be multiplied by the correction coefficient 1.4648 in order to minimize inaccuracies. The PMV_predicted, obtained through the M_predicted, when related to the actual thermal sensation, provides a coefficient of determination of 0.7511, thereby improving the model of the PMV.     

Development and implementation of clinical guidelines: An artificial intelligence perspective

Clinical practice guidelines in paper format are still the preferred form of delivery of medical knowledge and recommendations to healthcare professionals. Their current support and development process have well identified limitations to which the healthcare community has been continuously searching solutions. Artificial intelligence may create the conditions and provide the tools to address many, if not all, of these limitations.. This paper presents a comprehensive and up to date review of computer-interpretable guideline approaches, namely Arden Syntax, GLIF, PROforma, Asbru, GLARE and SAGE. It also provides an assessment of how well these approaches respond to the challenges posed by paper-based guidelines and addresses topics of Artificial intelligence that could provide a solution to the shortcomings of clinical guidelines. Among the topics addressed by this paper are expert systems, case-based reasoning, medical ontologies and reasoning under uncertainty, with a special focus on methodologies for assessing quality of information when managing incomplete information. Finally, an analysis is made of the fundamental requirements of a guideline model and the importance that standard terminologies and models for clinical data have in the semantic and syntactic interoperability between a guideline execution engine and the software tools used in clinical settings. It is also proposed a line of research that includes the development of an ontology for clinical practice guidelines and a decision model for a guideline-based expert system that manages non-compliance with clinical guidelines and uncertainty.     

The effect of cooling rate on the impact performance and dynamic mechanical properties of rotationally molded metallocene catalyzed linear low density polyethylene

This article examines changes to the morphology of rotationally molded metallocene catalyzed linear low density polyethylene brought about by varying the cooling rate during processing. These changes in morphology lead to variations in the impact performance, which is reflected in the dynamic mechanical characteristics of the materials. Various analytical techniques are used in an attempt to explain the differences in impact behavior. Slow cooling is shown to result in high crystallinity, and in the formation of large spherulites, which in turn is detrimental to the impact performance of the material, particularly at low temperatures. The high crystallinity corresponds with a shift in the β transition of the material to a higher temperature, and is shown to result in a higher brittle–ductile transition. A case study was also carried out on samples from a finished part provided by an industrial molder, one section of which failed in a brittle manner when impact tested while the other failed in a ductile manner. Microscopy results showed that the brittle material had large spherulites at the inside surface, while the ductile material showed incipient degradation at this surface, which has previously been shown to be of benefit to impact strength in rotationally molded parts. Dynamic mechanical studies again showed a β transition at a higher temperature in the brittle samples. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1963–1971, 2006     

Acidolysis of babassu fat catalyzed by immobilized lipase

The lipase-catalyzed interesterification of oils and fats gives products that are unobtainable by chemical interesterification methods. Acidolysis of babassu fat and palmitic acid, catalyzed by immobilized lipase (Lipozyme; Novo Industri, Bagsveard, Denmark), was studied. The reactions were performed at 65°C with 5% w/w enzyme for 4 h. The molar proportions of babassu fat/palmitic acid were 1∶0.1, 1∶0.3 and 1∶0.5. At the end of the reaction period, the catalyst particles were removed by filtration, and the residual oil was extracted with organic solvent (diethyl ether). The recovered particles were then reused. The palmitic acid content of babassu fat before and after acidolysis changed from 10 to 22% at a molar proportion of 1∶0.5. The equilibrium was attained in about 4 h. The original water and enzymatic activities of Lipozyme were maintained after acidolysis. Water sorption isotherms of the immobilized enzyme were determined at 25, 35 and 45°C. From the temperature dependence of the isotherms, isosteric heats of sorption were evaluated by means of the Clausius Clapeyron equation. Monolayer moisture content was calculated by means of the B.E.T. and Guggenhein-Anderson-De Boer analyses. Paper presented at the International Meeting on Fats and Oils Technology, Universidade Estadual de Campinas, Brazil, 1991.