BiLSTM and dynamic fuzzy AHP-GA method for procedural game level generation

Neural Computing and Applications - The use of games in daily life, especially in education, has been in an incline during the COVID-2019 pandemic. Thus, game-based learning environments have...     

Hydrothermal synthesis of carbonate-free submicron-sized barium titanate from an amorphous precursor: Synthesis and characterization

In this paper, the amorphous barium titanate precursor was prepared by the peroxo-hydroxide method and post-treated by various drying procedures, such as: room temperature drying, room temperature vacuum drying and vacuum drying at 50 °C. The objective in the latter two treatments was to increase the Ti-O-Ba bonds of the precursor. The post-treated precursors were compared with the untreated (i.e., ‘wet’) precursor. Also, a barium titanate precursor was prepared by an alkoxide route. Afterwards, the precursors were hydrothermally treated at 200 °C in a 10 M NaOH solution. Vacuum drying of the precursor seemingly promoted the formation of Ti-O-Ti bonds in the hydrothermal end-product. The low Ba:Ti ratio (0.66) of the alkoxide-route prepared precursor lead to a multi-phase hydrothermal product with BaTiO₃ as the main phase. In contrast, phase pure BaTiO₃, i.e. without BaCO₃ contamination, was obtained for the precursor which was dried at room temperature. Cube-shaped and highly crystalline BaTiO₃ particles were observed by electron microscopy for the hydrothermally treated peroxo-hydroxide-route prepared precursor.     

Synchronization of diffusively-coupled limit cycle oscillators

We develop analytical and numerical conditions to determine whether limit cycle oscillations synchronize in diffusively coupled systems. We examine two classes of systems: reaction–diffusion PDEs with Neumann boundary conditions, and compartmental ODEs, where compartments are interconnected through diffusion terms with adjacent compartments. In both cases the uncoupled dynamics are governed by a nonlinear system that admits an asymptotically stable limit cycle. We provide two-time scale averaging methods for certifying stability of spatially homogeneous time-periodic trajectories in the presence of sufficiently small or large diffusion and develop methods using the structured singular value for the case of intermediate diffusion. We highlight cases where diffusion stabilizes or destabilizes such trajectories.     

Polyamorphism in Aluminum Nitride: A First Principles Molecular Dynamics Study

The high‐pressure behavior of amorphous aluminum nitride is investigated for the first time by means of ab initio molecular dynamics simulations. It is found to undergo two successive first‐order phase transformations with the application of pressure. The first one is a polyamorphic phase transition in which the low‐density amorphous phase transforms into a high‐density amorphous phase having an average coordination number of about 4.6. The high‐density amorphous structure transforms back to a low‐coordinated amorphous network upon pressure release but its density is higher than that of the original low‐density amorphous phase. The second phase change is the crystallization of the high‐density amorphous state into a rocksalt structure. A careful analysis suggests that the hexagonal‐like nanoclusters presented in amorphous aluminum nitride prevent the formation of a very dense amorphous phase (about sixfold coordinated) during the first phase transition and they act as a nucleation center for the crystallization process.     

Hemodialysis‐related headache

Headache is one of the most frequently encountered neurological symptoms during hemodialysis. According to International Classification of Headache criteria dialysis‐related headache was defined as the headache occurring during hemodialysis with no specific characteristic. It resolves spontaneously within 72 hours after the hemodialysis session ends. There are few studies in the literature investigating the clinical features of dialysis headache. The pathophysiology of hemodialysis‐related headache is not known, but various triggering factors have been identified, including changes in blood pressure, serum sodium and magnesium levels during hemodialysis sessions, caffeine deprivation and stress. The aim of this article is to evaluate and analyze features of headache in patients undergoing hemodialysis.     

On an iterative deadlock prevention approach for automated manufacturing systems

In Hu (Transactions of the Institute of Measurement and Control 33:59–76, 2011), Petri nets are utilized to describe, analyse and control automated manufacturing systems (AMS). In order to suppress deadlock occurrences in AMS, a method to derive the bad markings iteratively using a mixed integer programming-based algorithm is proposed. To validate the effectiveness and efficiency of the proposed approach, two examples were demonstrated in Hu (Transactions of the Institute of Measurement and Control 33:59–76, 2011). This paper shows that the uncontrolled Petri net model in one of the examples is incorrect. It is also shown that the structural complexity of the computed monitors for both examples can be reduced with the same or more permissive system behaviours.     

Polymers for medical and tissue engineering applications

Recent decades have seen great advancements in medical research into materials, both natural and synthetic, that facilitate the repair and regeneration of compromised tissues through the delivery and support of cells and/or biomolecules. Biocompatible polymeric materials have become the most heavily investigated materials used for such purposes. Naturally‐occurring and synthetic polymers, including their various composites and blends, have been successful in a range of medical applications, proving to be particularly suitable for tissue engineering (TE) approaches. The increasing advances in polymeric biomaterial research combined with the developments in manufacturing techniques have expanded capabilities in tissue engineering and other medical applications of these materials. This review will present an overview of the major classes of polymeric biomaterials, highlight their key properties, advantages, limitations and discuss their applications. © 2014 Society of Chemical Industry     

Emulsifier‐free cationic latexes based on vinylbenzyl chloride and 2‐(dimethylamino)ethyl methacrylate with adjusted hydrophilic–hydrophobic properties

Functional emulsifier‐free cationic latexes based on styrenic monomer vinylbenzyl chloride (VBC) and acrylic monomer 2‐(dimethylamino)ethyl methacrylate (DMA) were successfully prepared with dual quaternary ammonium ions (36–63 mol %) on both monomer moieties in two‐stages. First, [2‐(methacryloyloxy)ethyl]dimethylhexadecylammonium bromide monomer (DMA(C₁₆)), prepared via quaternization of DMA with 1‐bromohexadecane, was utilized as a comonomer (5–20%) as well as a surfactant in the emulsion polymerization of VBC. Next, the quaternization of chloromethyl groups in the VBC moiety in latex particles with trimethylamine and N,N‐dimethylhexadecylamine created a second type of quaternized sites on the latex particles. The percentages of the quaternary ammonium ions of the first‐stage latexes (P[VBC‐DMA(C₁₆‐x)]) and the second‐stage latexes (P[VBC(R)‐DMA(C₁₆‐x)]) were determined using bromide and chloride ion‐selective electrodes. The particles were characterized with a scanning electron microscope, Zetasizer, measuring water contact angles of their pellets. The polymer structure and the alkyl group length in their quaternary ammonium ions played an important role on the sizes, zeta potentials and hydrophilic–hydrophobic balances of the latexes. The water contact angles of the pellets of the latex particles varied from 50.3 to 109.6° depending on both the polymer structure and the alkyl group length. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42775.     

Revised stratigraphy of the Tertiary deposits of Istanbul and their engineering properties

For over 50 years, the Upper Oligocene–Upper Miocene sedimentary sequence in Istanbul has been considered to be formed of two distinct sequences separated by an unconformity. However, recent field observations and an analysis of numerous borehole data indicate the Gürp?nar, Çukurçe?me and Güngören Formations are in fact a single sequence of alternating clay–sand/sandstone beds/lenses, here named the Avc?lar Formation. The Bak?rköy Formation, which is typically composed of carbonate rocks, conformably overlies the Avc?lar Formation. The paper provides the geotechnical parameters of the units within the Avc?lar Formation which it is hoped will facilitate selecting suitable geotechnical and engineering geological parameters to represent the deposits and minimize errors in the interpretation/evaluation of in-situ conditions.