Studies of the changes in the geometry of grain boundaries and grains during recovery/continuous recrystallization in α-Fe

Samples of -Fe (Armco) have been deformed by 50% in compression. These have then been annealed at 400 °C, considerably below the conventional recrystallization temperature, and the evolution of grain size and shape quantified. Initially the grain size is found to decrease whilst, at the same time, the grain-shape anisotropy also decreases. It is suggested that a continuous recrystallization process which favours the generation of higher angle grain boundaries is the underlying mechanism. Annealing for longer times gives rise to an increase in grain size with the development of undulations on the grain surfaces. The mechanism suggested for this behaviour involves the annihilation of segments of sub-boundaries on to a pre-existing boundary from either side of the boundary.     

Investigation of the degree of crystallinity of acrylonitrile-divinylbenzene copolymers

Using the wide-angle X-ray scattering method, the degree of crystallinity of suspension copolymers and terpolymers of acrylonitrile (AN) and divinylbenzene (DVB) were determined. Copolymers with various degrees of cross-linking (5%–50% DVB) were prepared in the presence of thermodynamically different solvents added in order to obtain porous structure. It was found that copolymers with a degree of cross-linking of 0.1% DVB have a crystallinity index below 0.2, although the crystallinity index of PAN obtained under the same conditions is 0.5. Owing to the solvation conditions, even in copolymers with a degree of cross-linking of 20% DVB, ordered regions occur, and dilution of the polymerization mixture with poor solvents cause a decrease in the degree of crystallinity of these copolymers. Terpolymers AN, butyl acrylate (BA) or vinyl acetate (VA) have less ordered structure for the same amount of DVB. Methacrylonitrile and DVB copolymers obtained under the same conditions as AN and DVB are amorphous.     

Picosecond thermal pulses in thin gold films

In this paper it has been shown that, with the advent of lasers with a very short pulse duration, the effect of thermal wave propagation becomes important. To consider this effect, hyperbolic heat conduction in thin gold films was studied. It was shown that for heat fluxes of the order 10⁸ W·cm^–2, a thermal wave is generated in thin gold films. The consideration of the hyperbolicity of heat transfer enables one to describe the temperature profile with one value of fluence.     

Shaping Luminescent Properties of Yb3+ and Ho3+ Co‐Doped Upconverting Core–Shell β‐NaYF4 Nanoparticles by Dopant Distribution and Spacing

At the core of luminescence color and lifetime tuning of rare earth doped upconverting nanoparticles (UCNPs), is the understanding of the impact of the particle architecture for commonly used sensitizer (S) and activator (A) ions. In this respect, a series of core@shell NaYF₄ UCNPs doped with Yb³⁺ and Ho³⁺ ions are presented here, where the same dopant concentrations are distributed in different particle architectures following the scheme: YbHo core and YbHo@…, …@YbHo, Yb@Ho, Ho@Yb, YbHo@Yb, and Yb@YbHo core–shell NPs. As revealed by quantitative steady‐state and time‐resolved luminescence studies, the relative spatial distribution of the A and S ions in the UCNPs and their protection from surface quenching has a critical impact on their luminescence characteristics. Although the increased amount of Yb³⁺ ions boosts UCNP performance by amplifying the absorption, the Yb³⁺ ions can also efficiently dissipate the energy stored in the material through energy migration to the surface, thereby reducing the overall energy transfer efficiency to the activator ions. The results provide yet another proof that UC phosphor chemistry combined with materials engineering through intentional core@shell structures may help to fine‐tune the luminescence features of UCNPs for their specific future applications in biosensing, bioimaging, photovoltaics, and display technologies.     

Biofunctionalized upconverting CaF<Subscript>2</Subscript>:Yb,Tm nanoparticles for <Emphasis Type="Italic">Candida albicans</Emphasis> detection and imaging

Versatile optimization of the synthesis method and composition of Yb3+ and Tm3+ co-doped CaF2 nanoparticles as well as a novel biofunctionalization method were developed and evaluated.Through multistep synthesis,the luminescence intensity of the Tm3+ activator was enhanced by more than 10-fold compared to standard one-step synthesis.The proposed methods were used to homogenously distribute the doping ions within the nanoparticle's volume and thus reduce luminescence quenching.Optimization of dopant ions concentration led to the selection of the most efficient visible and near-infrared up-converting nanoparticles,which were CaF2 doped with 10％ Yb3+ 0.05％ Tm3+ and 20％ Yb3+ 0.5％ Tm3+,respectively.To illustrate the suitability of the synthesized nanoparticles as bio-labels,a dedicated biofunctionalization method was used,and the nanoparticles were applied for labeling and imaging of Candida albicans cells.This method shows great promise because of extremely low background and high specificity because of the presence of the attached molecules.     

Recent progress in continuous and semi-continuous processing of solid oral dosage forms: a review

Context: Continuous processing is an innovative production concept well known and successfully used in other industries for many years. The modern pharmaceutical industry is facing the challenge of transition from a traditional manufacturing approach based on batch-wise production to a continuous manufacturing model.

Objective: The aim of this article is to present technological progress in manufacturing based on continuous and semi-continuous processing of the solid oral dosage forms.

Methods: Single unit processes possessing an alternative processing pathway to batch-wise technology or, with some modification, an altered approach that may run continuously, and are thus able to seamlessly switch to continuous manufacturing are briefly presented. Furthermore, the concept of semi-continuous processing is discussed. Subsequently, more sophisticated production systems created by coupling single unit processes and comprising all the steps of production, from powder to final dosage form, were reviewed. Finally, attempts of end-to-end production approach, meaning the linking of continuous synthesis of API from intermediates with the production of final dosage form, are described.

Results: There are a growing number of scientific articles showing an increasing interest in changing the approach to the production of pharmaceuticals in recent years. Numerous scientific publications are a source of information on the progress of knowledge and achievements of continuous processing. These works often deal with issues of how to modify or replace the unit processes in order to enable seamlessly switching them into continuous processing. A growing number of research papers concentrate on integrated continuous manufacturing lines in which the production concept of “from powder to tablet” is realized. Four main domains are under investigation: influence of process parameters on intermediates or final dosage forms properties, implementation of process analytical tools, control-managing system responsible for keeping continuous materials flow through the whole manufacturing process and the development of new computational methods to assess or simulate these new manufacturing techniques. The attempt to connect the primary and secondary production steps proves that development of continuously operating lines is possible.

Conclusion: A mind-set change is needed to be able to face, and fully assess, the advantages and disadvantages of switching from batch to continuous mode production.     

Microstructure and Processing of 3D Printed Tungsten Microlattices and Infiltrated W–Cu Composites

Tungsten is of industrial relevance due its outstanding intrinsic properties (e.g., highest melting‐point of all elements) and therefore difficult to 3D‐print by conventional methods. Here, tungsten micro‐lattices are produced by room‐temperature extrusion‐based 3D‐printing of an ink comprising WO₃–0.5%NiO submicron powders, followed by H₂‐reduction and Ni‐activated sintering. The green bodies underwent isotropic linear shrinkage of ≈50% during the thermal treatment resulting in micro‐lattices, with overall 35–60% open‐porosity, consisting of 95–100% dense W–0.5%Ni struts having ≈80–300 μm diameter. Ball‐milling the powders and inks reduced the sintering temperature needed to achieve full densification from 1400 to 1200 °C and enabled the ink to be extruded through finer nozzles (200 μm). Partial sintering of the struts is achieved when NiO is omitted from the ink, with submicron interconnected‐porosity of ≈34%. Several tungsten micro‐lattices are infiltrated with molten copper at 1300 °C under vacuum, resulting in dense, anisotropic W–Cu composites with 40–65% tungsten volume fraction. Partially sintered struts (containing nickel) with submicron open porosity are also infiltrated with Cu, resulting in co‐continuous W–Cu composites with wide W struts/Cu channels at the lattice scale (hundreds of micrometers), and fine W–Cu interpenetrating network at the strut scale (hundreds of nanometers) allowing for the design of anisotropic mechanical and electrical properties.

     

Magnetic Ordering of Dy3+ Ions in RbDy(WO4)2 Single Crystal

The specific heat C(T) of the monoclinic RbDy(WO ₄ ) ₂ crystal has been studied at very low temperatures 0.2T1.9 K and in magnetic fields 0H0.38 T. The Neel temperature was shown to be equal to T_N = 0.818 ± 0.005 K. The experimental value of the effective exchange parameter was obtained to be equal to J/k = – 0.798 K. The C T) dependence below Neel temperature 0.5T_N0.99T_N ) is well described by 2D Ising model, whereas in the temperature region close above T_N (1.01 T_N2T_N) it can be described by neither 2D, nor 3D Ising model. The experimental and theoretical H-T_N diagrams for field H a are in a reasonable agreement for simple quadratic lattice.